• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.3 s.246
• /
• pp.249-259
• /
• 2006

Stress and displacement fields of a propagating Mode III crack in an orthotropic functionally gradient material (OFGM), which has (1) linear variation of shear modulus with a constant density, and (2) an exponential variation of shear modulus and density, are derived. The equations of motion in OFGM are developed and solution to the displacement and stress fields fer a propagating crack at constant speed though an asymptotic analysis. The stress terms associated with $\gamma^{-1/2}\;and\;\gamma^{0}$ are not affected by the FGM constant $\zeta$ which is nonhomogeneous parameter, only on the higher order terms, the influences of nonhomogeneity on the stress are explicitly brought out. When the FGM constant $\zeta\;is\;zero\;or\;\gamma{\rightarrow}0$, the fields for OFGM are almost same as the those for homogeneous orthotropic material. Using the stress components, the effects of nonhomogeneity on stress components are discussed.

• Progress in Medical Physics
• /
• v.13 no.4
• /
• pp.195-201
• /
• 2002

Several investigators have presented the effects of external magnetic fields on the dose distributions for clinical electron and photon beams. We focus the low energy electron beam with more lateral scatter In this study we calculated the beam profiles for an clinical electron beam of 6 MeV with longitudinal magnetic fields of 0.5 T-3.0 T using a Monte Carlo code. The principle of dose enhancements in the penumbra region is to deflect the laterally scattered electrons from its initial direction by the skewness of the laterally scattered electrons along the direction of magnetic field lines due to Lorentz force under longitudinal magnetic field. To discuss the dose enhancement effect on the penumbra area from the calculated results, we introduced the simple term of penumbra reduction ratio (PRR), which is defined as the percentage difference between the penumbra with and without magnetic field at the same depth. We found that the average PRR are 33%, and 49% over the depths of 1.5 cm, 2.0 cm, and 2.4 cm for the magnetic fields of 2.0 T and 3.0 T respectively. For the case of 0.5 T and 1.0 T the effects of magnetic filed were not observed significantly. In order to obtain the dose enhancement effects by the external magnetic field, we think that its strength should be more than 2 T approximately. We expect that the PRR would be saturated to 50-60% with magnetic fields of 3 T-5 T As a result of these calculations we found that the penumbra widths can be reduced with increased magnetic fields. This Penumbra reduction is explained as a result of electron lateral spread outside the geometrical edges of the beam in a longitudinal magnetic field. This means that the electron therapy benefits from the external magnetic fields.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3098-3103
• /
• 2007

In this paper, natural convection of a magnetic fluids(W-40) in a half circular pipe enclosure are investigated by numerical and experimental method. One side wall is kept at a constant temperature(25$^{\circ}C$), and the opposite side wall is also kept at a constant temperature(20$^{\circ}C$). Under above conditions, various magnitudes of the magnetic fields were applied up. Theoretical study through the governing equation derived by Siliomis is carried out with numerical analysis by the GSMAC Method. And the thermo-sensitive liquid crystal film(R20C5A) is utilized in order to visualize wall-temperature distributions as an experimental method. This study has resulted in the following fact that the natural convection of a magnetic fluids are controlled by the direction and intensity of the magnetic fields.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.181-185
• /
• 2007

A free-surface correction(FSC) method is presented to solve the 3-D shallow water equations. Using the mode splitting process, FSC method can simulate shallow water flows under the hydrostatic assumption. For the hydrostatic pressure calculation, the momentum equations are firstly discretized using a semi-implicit scheme over the vertical direction leading to the tri-diagonal matrix systems. A semi-implicit scheme has been adopted to reduce the numerical instability caused by relatively small vertical length scale compare to horizontal one. and, as the free surface correction step the final horizontal velocity fields are corrected after the final surface elevations are obtained. Finally, the vertical final velocity fields can be calculated from the continuity equation. The numerical model is applied to the calculation of the simulation of flow fields in a rectangular open channel with the tidal influence. The comparisons with the analytical solutions show overall good agreements between the numerical results and analytical solutions.

• Bulletin of the Korean Mathematical Society
• /
• v.29 no.1
• /
• pp.153-163
• /
• 1992

Carlitz module is used to study abelian extensions of K=$F_{q}$(T). In number theory every abelian etension of Q is contained in a cyclotomic field. Similarly every abelian extension of $F_{q}$(T) with some condition on .inf. is contained in a cyclotomic function field. Hence the study of cyclotomic function fields in analogy with cyclotomic fields is an important subject in number theory. Much are known in this direction such as ring of integers, class groups and units ([G], [G-R]). In this article we are concerned with the ring of integers in a cyclotomic function field. In [G], it is shown that the ring of integers is generated by a primitive root of the Carlitz module using the ramification theory and localization. Here we will give another proof, which is rather elementary and explicit, of this fact following the methods in [W].[W].

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.3
• /
• pp.265-268
• /
• 2009

We present the experimental study to realize a DNA separation chip using asymmetrically-switched nonuniform electric fields. The DNA separation chip redistributes DNA molecules within a specific area based on the size- and field-dependent nonlinearity of DNA drift velocity. The present chip is composed of a width variable channel to distribute nonuniform electric field, a DNA loading slit and a pair of electrodes to apply electric field. We focus on the design of DNA separation chips with identifying the nonlinearity of DNA drift velocity using three different DNA molecules (11.1kbp, 15.6kbp, and 48.5kbp) in the chips. It is demonstrated that different size of DNA shows different net migration in different direction under the asymmetrically-switched nonuniform electric field.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.249-252
• /
• 2012

Experiments have been conducted to clarify flame spread behavior over electrical wire near the end of wire with applied AC electric fields. It is seen that the flame spread behavior near the end of wire with applied AC electric fields are quite different from that in temporally linearly-increasing flame position. The flame spread behavior can be categorized into three regimes based on the relevance of flame shape and the slanted direction of spread flame to spread rate. Detailed explanations on the characteristics are made through thermal balance mechanism. Also, the effect of drop of molten PE and fuel vapor-jet in flame spread is also discussed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.11 no.3
• /
• pp.1719-1723
• /
• 1969

In this country, farmers lay out furrows in the direction which is considered by their own judgement to be convenient for cultivation without paying much attention for soil erosion. The direction of furrow has considerable effects on soil and water losses. In this experiment, it is intedned to observe the differences of soil and water losses in different directions of furrows of sloped fields so that the results thus obtained could be informed to farmers who should be careful in determining furrow direction for soil erosion control. Some the major experimental results are summarized as follows: The direction of furrows did not affect so much on the runoffs in a gentle slope, as the runoff is 509 ton/10a in the contouring plot, $51^{\circ}$/ton/10a in the 45-degree plot, and 560 ton/10a in the up-and-down hill plot. The contouring plot among the three plots had best effect on soil conservation, as the soil losses are 5.8 ton/10a in the contouring plot, 9.3 ton/10a in the 45 degree plot, and 10.2 ton/10a in the up-and-down hill plot.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.2
• /
• pp.126-132
• /
• 2012

The technique for estimation of sound source direction is one of the important methods necessary for various engineering fields such as monitoring system, military services and so on. As a new approach for estimation of sound source direction, this paper propose the bio-mimetic localization sensor based on mechanically coupling structure motivated by hearing structure of fly, Ormia Ochracea. This creature is known for its outstanding recognition ability to the sound which has large wavelength compared to its own size. ITTF (Inter-Tympanal Transfer Function) which is the transfer function between displacements of the tympanal membranes on each side has the all inter-tympanal information dependent on sound direction. The peak and notch features of desired ITTF can be generated by using the appropriate mechanical properties. A example of estimation of sound source direction using generated ITTF with monotonically changing notch and peak patterns is shown.

• Journal of Magnetics
• /
• v.7 no.4
• /
• pp.147-150
• /
• 2002

The pinning direction, the spin flop behaviors and the magnetoresistive properties in top synthetic spin valve structure [NiFe/CoFe/Cu/CoFe (t$_{p2}$)/Ru/CoFe (t$_{p1}$)/IrMn] were investigated. The magnetoresistive and pinning characteristics of synthetic spin valves strongly depended on the differences in the two pinning layer thickness, ${\Delta}t(=t_{p2}-t_{p1})$. In contrast to the conventional spin valves, the pinning direction (P1) was canted off with respect to the growth field axis with ${\Delta}t$. We found that the canting angle ${\Phi}$ had different values according to the annealing field direction and ${\Delta}t$. When the samples were annealed at above the blocking temperature of IrMn with zero fields, the canted pinned layer could be set along the growth field axis. Because the easy axis which was induced by the growth field during deposition is still active in all ferromagnetic layers except the IrMn at $250{^{\circ}C}$, the pinning direction could be aligned along the growth field axis, even in 0 field annealing.