• 한국철도학회논문집
• /
• 제11권4호
• /
• pp.398-403
• /
• 2008

전동차용 견인전동기 시스템은 저항 및 쵸퍼 제어에 의한 직류 전동기 방식에서 인버터 제어에 의한 유도전동기 방식으로 발전하였다. 오늘날 유도전동기 기술은 어느 정도 성숙기에 접어들었지만 최근에는 소음제거, 효율 극대화 및 유지보수 비용 절감 등의 이점이 있는 감속기를 제거한 직접 구동용 영구자석 전동기가 새로이 각광받고 있다. 특히 기계적으로 견고한 매입형 영구자석 동기전동기는 출력/토크 밀도가 높고 약계자 제어성이 우수하며 고효율 운전이 가능하다. 본 논문은 자기적 포화특성이 심한 영구자석 전동기를 대상으로 고급화된 비선형 수치해석 기법을 적용하여 설계된 전동기의 특성해석을 나타낸다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.29-30
• /
• 2012

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.55-58
• /
• 2003

A LQ-servo PI controller is proposed to deal with the uncertainty caused variations of load inertia of direct drive do motor by using loop shaping technique.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.642-647
• /
• 1993

In general, systems contain uncertain elements in the real world; these may be parameters, constant or varying, that are unknown or imperfectly known. When the uncertainty is assumed to satisfy the matching condition and to be cone-bounded, Y.H. Chen[81 proposed an adaptive robust control algorithm which introduced adaptive scheme for a design parameter into robust deterministic controls. In this paper, the above control algorithm is applied to the position tracking control of 2 DOF direct drive SCARA robots, and simulation and experimental studies are conducted to verify the control algorithm and to evaluate control performance.

• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.17-24
• /
• 1999

본 논문에서는 새로운 적응 퍼지 슬라이딩 모드제어 방법을 제시하였다. 제어기는 정확한 수확적인 모델이 없이도 점근적으로 시스템을 안정화시킬 수 있으며 적분항을 포함시킴으로서 정상상태에서의 오차를 좀 더 줄일 수가 있다. 직접구동모터는 감쇄기어가 없어서 부하나 외란 토크의 변화에도 모터 역학에 직접적으로 많은 영향을 줄 수가 있다. 제어기의 실제성능을 확인하기 위하여 불확실한 부하나 변소를 갖는 직접구동모터의 위치제어에 적용하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.286-289
• /
• 2008

Mass of generator is one of the most important characteristic value especially direct drive type wind turbine. This paper introduce how to decease mass of generator rotor frame without declining generator performance. To obtain optimal design of rotor frame, sensitivity analysis using Taguchi method and RSM(response surface method) are have been performed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.208-210
• /
• 2007

This paper proposes a novel direct instantaneous pressure control(DIPC) of hydraulic pump system with SR drive. And it has very simple control structure, because it doesn’t use any speed and torque control for adjusting pump pressure. The hysteresis band of pressure and proper switching rules can make the actual pump pressure to be constant with fast dynamic response. Therefore, the proposed DIPC method can control of hydraulic pump pressure steadily with fast dynamic response.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제2B권3호
• /
• pp.81-89
• /
• 2002

The sensorless AC motor drive is a popular topic of study due to the cost and reliability of speed and position sensors. Most sensorless algorithms are based on the mathematical modeling of motors including electrical variables such as phase current and voltage. Therefore, the accuracy of such variables largely affects the performance of the sensorless AC motor drive. However, the output voltage of the SVPWM-VSI, which is widely used in sensorless AC motor drives, has considerable errors. In particular, the SVPWM-VSI is error-prone in the low speed range because the constant DC link voltage causes poor resolution in a low output voltage command and the output voltage is distorted due to dead time and voltage drop. This paper investigates a novel high-performance strategy for overcoming these problems in a sensorless ac motor drive. In this paper, a variation of the DC link voltage and a direct compensation for dead time and voltage drop are proposed. The variable DC link voltage leads to an improved resolution of the inverter output voltage, especially in the motor's low speed range. The direct compensation for dead time and voltage drop directly calculates the duration of the switching voltage vector without the modification of the reference voltage and needs no additional circuits. In addition, the proposed strategy reduces a current ripple, which deteriorates the accuracy of a monitored current and causes torque ripple and additional loss. Simulation and experimentation have been performed to verify the proposed strategy.

• 유공압시스템학회논문집
• /
• 제1권4호
• /
• pp.1-8
• /
• 2004

The optimum design parameters of several hydraulic systems are obtained using the complex method that is one kind of constrained direct search method. First, the parameters of lead-lag controller of the direct drive servovalve is designed using the complex method to satisfy the steady-state error requirement. Second, the optimum locating point of hydraulic cylinder Is determined to minimize the cylinder force in the operation range of rotational sluice gate. For the third application case, the optimum piston area of hydraulic cylinder is determined to minimize the man power to elevate the manually operated sluice gate.

• 프린팅코리아
• /
• 통권60호
• /
• pp.123-123
• /
• 2007