• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.305-308
• /
• 2009

This paper presents the design and analysis of RF Front End for Wireless Heartbeat measurement System. In this work LNA, an inductor connected at the gate of the cascode transistor and capacitive cross-coupling are strategically combined to reduce the noise and the nonlinearity influences of the cascode transistors in a differential LNA. The Mixer is implemented by using the Gilbert-type configuration, cross pmos injection technique and the resonating technique for the tail capacitance. The resulting LNA achieves 1.26 dB NF, better than 1.88dB NF Typical Also Mixer resulting achieves 9.8dB at 100KHz.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.16-20
• /
• 2002

This paper describes the resistive FET mixer with low IF for the 4-Ch DBF(Digital Beam Forming) receiver with LNA(Low Noise Amplifier). This DBF receiver based on the direct conversion method is generally suitable for high-speed wireless mobile communications. A radio frequency(RF), a local oscillator(LO) and an intermediate frequency(IF) considered in this research are 2.09 ㎓, 2.08 ㎓ and 10㎒, respectively. The RF input power, LO input power and Vgs are used -10㏈m, 6㏈m and -0.4 V, respectively. In the 4-Ch resistive FET mixer with LNA, the measured IF and harmonic components of 10㎒, 20㎒, 2.09㎓ and 4.17㎓ are about -12.5 ㏈m, -57㏈m, -40㏈m and -54㏈m, respectively. The IF output power observed at each channel of 10㎒ is about -12.5㏈m and it is higher 27.5 ㏈m than the maximum harmonic component of 2.09㎓. Each IF output spectrum of the 4-Ch is observed almost same value and it shows a good agreement with the prediction.

• Biomolecules & Therapeutics
• /
• v.25 no.4
• /
• pp.362-366
• /
• 2017

Direct conversion by trans-differentiation is of growing interest in cell therapy for incurable diseases. The efficiency of cell reprogramming and functionality of converted cells are important considerations in cell transplantation therapy. Here, we compared two representative protocols for the generation of induced-oligodendrocyte progenitor cells (iOPCs) from mouse and rat fibroblasts. Then, we showed that induction of Nkx6.2, Olig2, and Sox10 (NOS) was more effective in mouse fibroblasts and that induction of Olig2, Sox10, and Zfp536 (OSZ) was more effective at reprogramming iOPCs from rat fibroblasts. However, OSZ-iOPCs did not show greater proliferation than NOS-induced cells. Because the efficiency of iOPCs generation appears to differ between cell species depending on transcription factors and culture conditions, it is important to select appropriate methods for efficient reprogramming.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.115-122
• /
• 2002

In this paper, we proposed a new technique to be compatible the passive with active ETC system. Now the TTA is making a Standard of the Active DSRC System. So It is necessary to be compatible the developed and running passive ETC system with the developing active ETC system. So we proposed the direct conversion method without performance a decreasing of passive DSRC system using a similar bandwidth of the active ETC system. Simulations carried out and the results show the difference between the conventional and proposed method.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.10
• /
• pp.3692-3695
• /
• 2011

Poly(N,N'-Dichloro-N-ethyl-benzene-1,3-disulfonamide) (PCBS) and N,N,N',N'-Tetrachlorobenzene-1,3-disulfonamide (TCBDA) were found to be a mild and efficient reagent for the direct oxidative conversion of sulfur compounds to the corresponding arenesulfonyl chlorides in good to excellent yields through the oxidative chlorination. The overall process is simple, practical, and it provides convenient access to a variety of aryl or heteroarylsulfonyl chlorides. The mild reaction conditions and the broad substrate scope render this method attractive, and complementary to existing syntheses of aryl or heteroarylsulfonyl chlorides.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.501-504
• /
• 2004

This paper presents a simple gain/phase blind compensation algorithm with an automatic gain control (AGC) function for the adoption of the AGC function and compensation for gain/phase imbalances in quadrature phase shift keying (QPSK) direct conversion receivers (DCRs). The AGC function is interactively operated with the compensation algorithm for gain/phase imbalances. By detecting the gain sum and difference values between the I-channel and Q-channel, the combined AGC and gain imbalance compensation algorithm provides a simpler DCR architecture.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.853-856
• /
• 2002

Present. direct method x-ray conversion detector is studied by abroad medical instrument and country with amorphous Selenium. And we search the method for large area x-ray detector. Amorphous-Selenium based photoreceptor is widely used on the X-ray conversion materials. But amorphous-selenium based x-ray conversion detector is broken by high voltage and leakage defect point. In this paper, We investigated top-electrode distance rate to improve defect point and high voltage broken. The result to appoint to made large area x-ray conversion detector with base data.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.956-961
• /
• 2000

This paper describes the design of a small size Alkali Metal Thermal to Electric Converter (AMTEC) which employs a capillary structure for recirculating sodium working fluid. The cycle is based on the simple and small capillary type ${\beta}"$ -alumina and wick tube element. The proposed cell consists of the 37 conversion elements with capillary tube of $50{\mu}m$ in diameter and the sealed cylindrical vessel of 22mm in outer diameter. Results on the cycle analysis of sodium flow and heat transfer in the cell showed that the expected power output was 4.65W and the conversion efficiency was 19% for the source temperature of 900K.

• Journal of Power System Engineering
• /
• v.14 no.1
• /
• pp.27-33
• /
• 2010

We investigate some operation characteristics and energy efficiency of the BLDC motor system driven by different two types power conversion method depends on same battery source for applying to electrical motor propulsion system of a small ship. Also, we suggest an estimation manner of operating performances such as total running distance and operating speed of ships from basic discharge voltage characteristics of batteries. Through some experiments, direct power conversion was better than indirect method on the view point of energy efficiency and the voltage discharge characteristics could be used as important design factor for estimating operating performances of small ships driven by electrical motors.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.10a
• /
• pp.67-68
• /
• 2017