• Journal of the Korean earth science society
• /
• v.33 no.2
• /
• pp.126-138
• /
• 2012

Ultrasonic method is widely used for the evaluation of weathering index and of degree of deterioration because it is easily applicable $in$ $situ$. The basic idea of the method is that the ultrasonic velocity decreases as a rock is being weathered. Thus, the difference of ultrasonic velocities between fresh rock and weathered rock indicates the degree of weathering. In this method, the ultrasonic velocity of fresh rock is assumed to be 5,000 m/s. However, this assumption can cause significant errors in estimating weathering index, especially in case that those rocks of the same type have a wide range of ultrasonic velocities such as in Korea. Therefore, we obtained twenty rock specimens and sixty core samples commonly used for stone cultural heritages in Korea, and measured ultrasonic velocities. From the results, we found that the ultrasonic velocities of the same rock type, granite samples range from 3,118 to 5,380 m/s, and that the estimated weathering index can be highly biased if we use the fixed value of 5,000 m/s. We created a database (DB) by combining the measurement data and reported it. We also measured ultrasonic velocities by direct and indirect methods to quantify the calibration coefficient for each sampling site. We found that the calibration coefficients vary widely from site to site (1.31-1.76). Other factors, such as operator bias and temperature did not show any significant effect on errors in ultrasonic velocity measurements. Lastly, we applied our ultrasonic velocity DB and calibration coefficients to a stone cultural heritage, Bonghwang-ri Buddha statue. Our estimation of the weathering index was 0.3, 0.1 smaller than that by conventional method. The degree of deterioration was also different, "moderately weathered", while conventional method gave "highly weathered". Since other independent studies reported that the degree of deterioration of the Buddha statue was "moderately weathered", our estimation seems to be more accurate. Thus our method can help accurately evaluate the weathering index and the conservation planning for a stone cultural heritage.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.1-19
• /
• 1978

Power tiller is a major unit of agricultural machinery being used on farms in Korea. About 180.000 units are introduced by 1977 and the demand for power tiller is continuously increasing as the farm mechanization progress. Major farming operations done by power tiller are the tillage, pumping, spraying, threshing, and hauling by exchanging the corresponding implements. In addition to their use on a relatively mild slope ground at present, it is also expected that many of power tillers could be operated on much inclined land to be developed by upland enlargement programmed. Therefore, research should be undertaken to solve many problems related to an effective untilization of power tillers on slope ground. The major objective of this study was to find out the travelling and tractive characteristics of power tillers being operated on general slope ground.In order to find out the critical travelling velocity and stability limit of slope ground for the side sliding and the dynamic side overturn of the tiller and tiller-trailer system, the mathematical model was developed based on a simplified physical model. The results analyzed through the model may be summarized as follows; (1) In case of no collision with an obstacle on ground, the equation of the dynamic side overturn developed was: $$\sum_n^{i=1}W_ia_s(cos\alpha cos\phi-{\frac {C_1V^2sin\phi}{gRcos\beta})-I_{AB}\frac {v^2}{Rr}}=0$$ In case of collision with an obstacle on ground, the equation was: $$\sum_n^{i=1}W_ia_s\{cos\alpha(1-sin\phi_1)-{\frac {C_1V^2sin\phi}{gRcos\beta}\}-\frac {1}{2}I_{TP} \( {\frac {2kV_2} {d_1+d_2}\)-I_{AB}{\frac{V^2}{Rr}} \( \frac {\pi}{2}-\frac {\pi}{180}\phi_2 \} = 0 $$ (2) As the angle of steering direction was increased, the critical travelling veloc\ulcornerities of side sliding and dynamic side overturn were decreased. (3) The critical travelling velocity was influenced by both the side slope angle .and the direct angle. In case of no collision with an obstacle, the critical velocity $V_c$ was 2.76-4.83m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ ; and in case of collision with an obstacle, the critical velocity $V_{cc}$ was 1.39-1.5m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ (4) In case of no collision with an obstacle, the dynamic side overturn was stimu\ulcornerlated by the carrying load but in case of collision with an obstacle, the danger of the dynamic side overturn was decreased by the carrying load. (5) When the system travels downward with the first set of high speed the limit {)f slope angle of side sliding was $\beta=5^\circ-10^\circ$ and when travels upward with the first set of high speed, the limit of angle of side sliding was $\beta=10^\circ-17.4^\circ$ (6) In case of running downward with the first set of high speed and collision with an obstacle, the limit of slope angle of the dynamic side overturn was = $12^\circ-17^\circ$ and in case of running upward with the first set of high speed and collision <>f upper wheels with an obstacle, the limit of slope angle of dynamic side overturn collision of upper wheels against an obstacle was $\beta=22^\circ-33^\circ$ at $\alpha=0^\circ -17.4^\circ$, respectively. (7) In case of running up and downward with the first set of high speed and no collision with an obstacle, the limit of slope angle of dynamic side overturn was $\beta=30^\circ-35^\circ$ (8) When the power tiller without implement attached travels up and down on the general slope ground with first set of high speed, the limit of slope angle of dynamic side overturn was $\beta=32^\circ-39^\circ$ in case of no collision with an obstacle, and $\beta=11^\circ-22^\circ$ in case of collision with an obstacle, respectively.

• Science of Emotion and Sensibility
• /
• v.23 no.2
• /
• pp.51-60
• /
• 2020

This study aimed to develop a modular smart clothing system for heart rate monitoring that reduces the inconvenience caused by battery charging and the large size of measurement devices. The heart rate monitoring system was modularized into a temporary device and a continuous device to enable heart rate monitoring depending on the requirement. The temporary device with near-field communication (NFC) and heart rate sensors was developed as a clothing attachment type that enables heart rate monitoring via smart phone tagging when required. The continuous device is based on Bluetooth Low Energy (BLE) communication and batteries and was developed to enable continuous heart rate measurement via a direct connection to the temporary device. Furthermore, the temporary device was configured to connect with a textile electrode made of a silver-based knitted fabric designed to be located below the pectoralis major muscle for heart rate measurement. Considering the user-experience factors, key functions, and the ease of use, we developed an application to automatically log through smart phone tagging to improve usability. To evaluate the accuracy of the heart rate measurement, we recorded the heart rate of 10 healthy male subjects with a modular smart clothing system and compared the results with the heart rate values measured by the Polar RS800. Consequently, the average heart rate value measured by the temporary system was 85.37, while that measured by the reference device was 87.03, corresponding to an accuracy of 96.73%. No significant difference was found in comparison with the reference device (T value = -1.892, p = .091). Similarly, the average heart rate measured by the continuous system was 86.00, while that measured by the reference device was 86.97, corresponding to an accuracy of 97.16%. No significant difference was found in terms of the heart rate value between the two signals (T value = 1.089, p = .304). The significance of this study is to develop and validate a modular clothing system that can measure heart rates according to the purpose of the user. The developed modular smart clothing system for heart rate monitoring enables dual product planning by reducing the price increase due to unnecessary functions.

• Korean Journal of Microbiology
• /
• v.49 no.1
• /
• pp.64-70
• /
• 2013

The greenhouse whitefly, Trialeurodes vaporariorum, is an economically important pest for greenhouse crops because they cause direct damage by feeding on plant nutrients and indirect damage as transmits many virus vectors. It has recently become a serious problem because of the continuous use of insecticide resulting in resistance among greenhouse whitefly population. To overcome these problems, in this study, the biological characteristics and virulence of an entomopathogenic fungus isolated from the cadaver of nymph greenhouse whitefly were investigated. Isolated fungus was identified as Isaria fumosorosea by morphological examinations and genetic identification using sequences of the ITS, ${\beta}$-tubulin, and EF1-${\alpha}$ regions. This fungus was named as I. fumosorosea SDTv and tested for the virulence against nymphs T. vaporariorum and the cold activity, the thermotolerance and the stability of UV-B irradiation on conidia. Mortality rate of greenhouse whitefly showed from 84 to 100% and the virulence increased with increasing conidial concentrations, $1{\times}10^5$ to $10^8$ conidia/ml. Conidia were stable at $35^{\circ}C$, 0.1 $J/cm^2$ of UV irradiation and germinated after 8 days at $4^{\circ}C$. Additionally, the activities of chitinases and proteases produced by I. fumosorosea SDTv were varied according to the medium. In conclusion, I. fumosorosea SDTv which showed high mortality rate against greenhouse whitefly will be used effectively in the integrated pest management programs against the greenhouse whitefly.

• Research in Community and Public Health Nursing
• /
• v.11 no.1
• /
• pp.21-36
• /
• 2000

The purpose of this study was to assess the needs of breast self examination education (BSEE) programs for developing nursing centers. A first, we reviewed the literature of activity and management-related factors of nursing centers: and, second. we used a questionnaire to discover the degree of knowledge, attitude, and practice on breast cancer, as well as an individual's intention to participate BSEE program. 1. Reviewing the literatures of nursing center activities. Nursing centers which were administered by a professional nurse are an ideal site for faculty and student practices. With the use of nursing models of health. professional nurses in nursing centers diagnose and treat human responses to potential and actual health problems and offer holistic, client-centered health service. In nursing centers professional nursing services include health education, health promotion, and health-related research. A nursing center is comprised of the advisory and exacutive commitee; the advisory commitee serves consultants and links community needs to the nursing center, while the director of the exacutive commitee identifies the potential resources to generate funds, support, and facilitate the activities of staffs in a nursing center. Nursing centers mobilize various financal resources for reimbursement of services from college and insurance companies, collect minimum service fees from the client, and further collect fees for providing programs to community groups, this also includes membership fees, and donations. The services provided by nursing centers focus on services related to primary prevention, health maintenance & health promotion, direct nursing care for acute & chronic diseases, and holistic care for actual and potential health problems. The client satisfaction for the services was high. Students also showed positive reponses for their clinical experiences and independent working conditions. 2. The degree of knowledge, attitudes, and practices for breast cancer. and an individual's intention to participate in the BSEE program. The subjects of this study were 308 females in K-city in the Republic of Korea. Data were collected using a self-administered questionnaire. The mean age of the respondents was 35.0 years old. Those who already participated in the BSEE were 64.9%, and those who had support and encouragement to practice BSE from significant others were 25.1 %. Clients intent to participate in the BSEE were 37.0%. The mean score of knowledge(2.4 out of 5 points) and practices(1.8 out of 5 points) for breast cancer were quite low, but the mean score of attitudes was relatively positive04.5 out of 20 point) for breast cancer. Those who already had BSEE showed significantly high scores in knowledge(t=6.48, p<0.01), attitudes (t=10.54, p<0.01). and practices(t=57.07, p<0.001) for breast cancer than those who had not participated in the BSEE. In all age groups no intention to participate in the BSEE was higher than who the intention to participate. These findings suggest some strategies should be developed to increase the awareness of breast cancer's early detection.

• The Journal of the Korean bone and joint tumor society
• /
• v.15 no.2
• /
• pp.111-121
• /
• 2009

Background: Osteosarcoma is one of the most common primary malignant tumors of bone occurring mainly in children and adolescents. Although surgery combined with chemotherapy has markedly improved patient survival during the last years, the use of anticancer drugs is still associated with serious problem, such as the frequent acquisition of drug-resistant phenotypes and occurrence of "secondary malignancies". Several solid tumors display enhanced expression of matrix metalloproteinases (MMPs), and recently clinical trials have been initiated on MMP-inhibitors. On the other hand, bisphosphonates (BPs) are inhibitors of bone resorption, and widely used to treat osteoclast-mediated bone diseases. Also they appear to possess direct antitumor activity. Methods: One osteosarcoma cell line (U2OS) was treated with ibandronate (0, 0.1, 1, $10{\mu}M$) for 48 hours. Cell viabilities were determined using MTT assay, the mRNA levels of MMP-2 and MT1-MMP were detected by reverse-transcription polymerase chain reaction, the amount of MMP-2 and MT1-MMP protein were measured by Westernblot, the activities of MMP-2 were observed by Gelatin zymography, and Matrigel invasion assays were used to investigate the invasive potential of osteosarcoma cell lines before and after ibandronate treatment. Results: The invasiveness of U2OS cell line was reduced dose-dependently following 48 hour treatment of up to $10{\mu}M$ of the ibandronate at which concentration no cytotoxicity occurred. Furthermore, the gelatinolytic activities and protein and mRNA levels of MMP-2 and MT1-MMP were also suppressed by increasing ibandronate concentrations. Conclusion: Given that MMP-2 is instrumental in tumor cell invasion, it is very likely that the reduction in osteosarcoma cell invasion by ibandronate is a consequence, at least in part, of suppressed expression of both MMP-2 and MT1-MMP. Isolation of a molecule (s) responsible for the bisphosphonate inhibition of tumor cell invasion would pave the way for the development of a new generation of metastasis inhibitors.

• Archives of Reconstructive Microsurgery
• /
• v.5 no.1
• /
• pp.24-34
• /
• 1996

There are many kinds of free flaps for management of extensive soft tissue defect of extremities in orthopaedic field. Free vascularized scapular flap is one of the most useful and relatively easy to application. This flap has been utilize clinically from early eighties by many microsurgical pioneers. Authors performed 102 cases of this flap from 1984 to 1995. We have to consider about the surgical anatomy of the flap, technique of the donor harvesting procedures, vascular varieties and anatomical abnormalities and success rate and the weak points of the procedure. This flap nourished by cutaneous branches from circumflex scapular vessels emerges from the lateral aspect of the subscapular artery 2.5-5cm from its lateral origin passing through the triangular space(bounded by subscapularis, teres minor, teres major, long head of triceps). The terminal cutaneous branch runs posteriorly around the lateral border of the scapular and divided into two major branches, those transeverse horizontally and obliquely to the fascial plane of overlying skin of the scapular body. We can utilize these arteries for scapular and parascapular flap. The vascular pedicle ranged from 5 to 10 cm long depends on the dissection, usually two venae comitantes accompanied circumflex scapular artery and its major branches. The diameter of the circumflex scapular artery is more than 1mm in adult, rare vascular variation. Surgical techniques : The scapular flap can be dissected conveniently with prone or lateral decubitus position, prone position is more easier in my experience. There are two kinds of surgical approaches, most of the surgeon prefer elevation of the flap from its outer border towards its base which known easier and quicker, but I prefer elevation of the flap from its outer border because of the lowering the possibilities of damage to vasculature in the flap itself which runs just underneath the subcutaneous tissue of the flap and provide more quicker elevation of the flap with blunt finger dissection after secure pedicle dissection and confirmed the course from the base of the pedicle. There are minimal donor site morbidity with direct skin closure if the flap size is not so larger than 10cm width. This flap has versatility in the design of the flap shape and size, if we need more longer and larger one, we can use parascapular flap or both. Even more, the flap can be used with latissimus dorsi musculocutaneous flap and serratus anterior flap which have common vascular pedicle from subscapular artery, some instance can combined with osteocutaneous flap if we include the lateral border of the scapular bone or parts of the ribs with serratus anterior. The most important shortcoming of the scapular free flap is non sensating, there are no reasonable sensory nerves to the flap to anastomose with recipient site nerve. Results : Among our 102 cases, overall success rate was 89%, most of the causes of the failure was recipient site vascular problems such as damaged recipient arterial conditions, and there were two cases of vascular anomalies in our series. Patients ages from 3 years old to 62 years old. Six cases of combined flap with latissimus dorsi, 4 cases of osteocutaneous flap for bone reconstruction, 62 parascapular flap was performed - we prefer parascapular flap to scapular. Statistical analysis of the size of the flap has less meaningful because of the flap has great versatility in size. In the length of the pedicle depends on the recipient site condition, we can adjust the pedicle length. The longest vascular pedicle was 14 cm in length from the axillary artery to the enter point cutaneous tissue. In conclusion, scapular free flap is one of the most useful modalities to manage the large intractable soft tissue defect. It has almost constant vascular pedicle with rare anatomical variation, easy to dissect great versatility in size and shape, low donor morbidity, thin and hairless skin.

• Journal of Environmental Policy
• /
• v.9 no.2
• /
• pp.157-184
• /
• 2010

Global climate change is destroying the water circulation balance by changing rates of precipitation, recharge and discharge, and evapotranspiration. The Intergovernmental Panel on Climate Change (IPCC 2007) makes "changes in rainfall pattern due to climate system changes and consequent shortage of available water resource" a high priority as the weakest part among the effects of human environment caused by future climate changes. Groundwater, which occupies a considerable portion of the world's water resources, is related to climate change via surface water such as rivers, lakes, and marshes, and "direct" interactions, being indirectly affected through recharge. Therefore, in order to quantify the effects of climate change on groundwater resources, it is necessary to not only predict the main variables of climate change but to also accurately predict the underground rainfall recharge quantity. In this paper, the authors selected a relevant climate change scenario, In this context, the authors selected A1B from the Special Report on Emission Scenario (SRES) which is distributed at Korea Meteorological Administration. By using data on temperature, rainfall, soil, and land use, the groundwater recharge rate for the research area was estimated by period and embodied as geographic information system (GIS). In order to calculate the groundwater recharge quantity, Visual HELP3 was used as main model for groundwater recharge, and the physical properties of weather, temperature, and soil layers were used as main input data. General changes to water circulation due to climate change have already been predicted. In order to systematically solve problems associated with how the groundwater resource circulation system should be reflected in future policies pertaining to groundwater resources, it may be urgent to recalculate the groundwater recharge quantity and consequent quantity for using via prediction of climate change in Korea in the future and then reflection of the results. The space-time calculation of changes to the groundwater recharge quantity in the study area may serve as a foundation to present additional measures for the improved management of domestic groundwater resources.

• Journal of Intelligence and Information Systems
• /
• v.17 no.1
• /
• pp.91-110
• /
• 2011

This paper analyzes the cases where the hotels have increased their services and enhanced their work process through IT solutions to cope with computerization globalization. Also the cases have been studies where national hotels use the CRM solution internally to respond effectively to customers requests, increase customer analysis, and build marketing strategies. In particular, this study discusses the introduction of the CRM solutions and CRM sales business and marketing services using a process for utilizing the presumed, CRM by introducing effective DEA(Data Envelopment Analysis). First, the comparison has done regarding the relative efficiency of L Company with the CCR model, then compared L Company's restaurants and facilities' effectiveness through BCC model. L Company reached a conclusion that it is important to precisely create and manage sales data which are the preliminary data for CRM, and for that reason it made it possible to save sales data generated by POS system on each sales performance database. In order to do that, it newly established Oracle POS system and LORIS POS system concerned with restaurants for food and beverage as well as rooms, and made it possible to stably generate and manage sales data and manage. Moreover, it set up a composite database to control comprehensively the results of work processes during a specific period by collecting customer registration information and made it possible to systematically control the information on sales performances. By establishing a system which unifies database and managing it comprehensively, impeccability of data has been greatly enhanced and a problem which generated asymmetric data could be thoroughly solved. Using data accumulated on the comprehensive database, sales data can be analyzed, categorized, classified through data mining engine imbedded in Polaris CRM and the results can be organized on data mart to provide them in the form of CRM application data. By transforming original sales data into forms which are easy to handle and saving them on data mart separately, it enabled acquiring well-organized data with ease when engaging in various marketing operations, holding a morning meeting and working on decision-making. By using summarized data at data mart, it was possible to process marketing operations such as telemarketing, direct mailing, internet marketing service and service product developments for perceived customers; moreover, information on customer perceptions which is one of CRM's end-products could feed back into the comprehensive database. This research was undertaken to find out how effectively CRM has been employed by comparing and analyzing the management performance of each enterprise site and store after introducing CRM to Hotel enterprises using DEA technique. According to the research results, efficiency evaluation for each site was calculated through input and output factors to find out comparative CRM system usage efficiency of L's Company four sites; moreover, with regard to stores, the sizes of workforce and budget application show a huge difference and so does the each store efficiency. Furthermore, by using the DEA technique, it could assess which sites have comparatively high efficiency and which don't by comparing and evaluating hotel enterprises IT project outcomes such as CRM introduction using the CCR model for each site of the related enterprises. By using the BCC model, it could comparatively evaluate the outcome of CRM usage at each store of A site, which is representative of L Company, and as a result, it could figure out which stores maintain high efficiency in using CRM and which don't. It analyzed the cases of CRM introduction at L Company, which is a hotel enterprise, and precisely evaluated them through DEA. L Company analyzed the customer analysis system by introducing CRM and achieved to provide customers identified through client analysis data with one to one tailored services. Moreover, it could come up with a plan to differentiate the service for customers who revisit by assessing customer discernment rate. As tasks to be solved in the future, it is required to do research on the process analysis which can lead to a specific outcome such as increased sales volumes by carrying on test marketing, target marketing using CRM. Furthermore, it is also necessary to do research on efficiency evaluation in accordance with linkages between other IT solutions such as ERP and CRM system.

• Journal of the Korean Society of Radiology
• /
• v.3 no.2
• /
• pp.27-31
• /
• 2009

Now a days, the Medical X-ray equipments has become digitalized from analog type such as film, cassette to CR, DR. And many scientists are still researching and developing the Medical X-ray equipment. In this study, we used the Bismuth tri-iodide to conversion material for digital X-ray equipments and we couldn't get the satisfying result than previous study, but it opened new possibility to cover the disadvantage of a-Se is high voltage aplly and difficultness of make. In this paper, we use $BiI_3$ powder(99.99%) as x-ray conversion material and make films that have thickness of 200um and the film size is $3cm{\times}3cm$. Also, we deposited an ITO(Indium Tin Oxide) electrode as top electrode and bottom electrode using a Magnetron Sputtering System. To evaluate a characteristics of the produced films, an electrical and structural properties are performed. Through a SEM analysis, we confirmed a surface and component part. And to analyze the electrical properties, darkcurrent, sensitivity and SNR(Signal to Noise Ratio) are measured. Darkcurrent is $1.6nA/cm^2$ and sensitivity is $0.629nC/cm^2$ and this study shows that the electrical properties of x-ray conversion material that made by screen printing method are similar to PVD method or better than that. This results suggest that $BiI_3$ is suitable for a replacement of a-Se because of the reduced manufacture processing and improved yield.