• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.67-72
• /
• 2010

본 논문에서는 기존의 궤도회로(Track Circuit)를 이용하는 FBS의 설비측면에서 단락감도 및 선로변 설비(지상설비)의 규모에 따른 유지보수의 증가 등의 문제점을 극복하고, 차량간 간격을 근접시키기 위한 열차제어 개념인 MBS의 구현에 따른 무인운전기술의 가능성을 검증하였다. MBS에 의한 열차 운전은 중앙국에서 열차의 위치를 실시간으로 알 수 있어 선행열차의 정보를 후속열차에 직접 전달할 수 있으므로 시격(Headway)단축이 가능해지고 그에 따라 수송수요 증대와 불필요한 가.감속을 방지할 수 있다. 이와 더불어 지상설비를 대폭적으로 감소시킬 수 있으며, 승객서비스 향상 및 승차감 향상 등의 이점을 제공한다.

• 한국응용과학기술학회지
• /
• 제29권4호
• /
• pp.561-569
• /
• 2012

본 연구는 강원도 소재 동해항만에서 발생하는 미세먼지 관리를 위한 환경비용편익을 산출하는 것이다. 항구 인근에 부유하는 미세먼지의 농도는 매우 높은 편이며, 지점에 따라 국가 기준인 $100{\mu}g/m^3$ 이상으로 관측되는 곳도 있다. 시험대상 항구는 주로 석회석과 석탄을 취급함으로써 미세입자상 물질이 하역시 다량 발생한다. 연구결과 PM10을 기준으로 년간 12톤의 미세먼지가 하역작업 시 발생하는 것으로 밝혀졌다. 덧붙여서 원료물질을 비롯한 다양한 화물을 운송하는 대형차량 및 중장비는 디젤 검댕이를 발생하고, 도로먼지의 비산을 유발한다. 지방정부는 해마다 20억원 이상의 비용을 투자하여 대기중 미세먼지를 제거하고 있다. 편익대비 비용을 산출한 결과 그 효과는 최소 240%에서 최대 720%까지 얻을 수 있는 것으로 나타났다.

• 한국유기농업학회지
• /
• 제20권4호
• /
• pp.475-490
• /
• 2012

Since 1997, Korean Ministry of Knowledge Economy and Ministry of Environment have established data on some 400 basic raw and subsidiary materials and process like energy, petro-chemical, steel, cement, glass, paper, construction materials, transportation, recycling and disposal etc by initiating establishment of LCI database. Regarding agriculture, Rural Development Administration has conducted establishment of LCI database for major farm products like rice, barley, beans, cabbage and radish etc from 2009, and released that they would establish LCI database for 50 items until 2020 later on. The domestic LCI database for seeds, seedling, agrochemical, inorganic, fertilizer and organic fertilizer etc is only at initial stage of establishment, so overseas LCI databases are brought and being used. However, since the domestic and overseas natural environments differ, they fall behind in reliability. Therefore, this study has the purpose to select organic farming materials, survey the production process for various types of organic farming materials and establish LCI database for the effects of greenhouse gas emitted by each crop during the process. As for selecting methods, in this study organic farming materials were selected in the method of direct observation of material and bottom-up method a survey method with focus on the organic farming materials admitted into rice production. For the basic unit of carbon emission amount by the production of 1kg of organic farming material, the software PASS 4.1.1 developed by Korea Accreditation Board under Ministry of Knowledge Economy was used. The study had the goal to ultimately provide basic unit to calculate carbon emission amount in executing many institutions like goal management system and carbon performance display system etc in agricultural sector to be conducted later on. As a result, emission basic units per 1kg of production were calculated to be 0.04968kg-$CO_2$ for oystershells, 0.004692kg-$CO_2$ for expanded rice hull, and 1.029kg-$CO_2$ for bordeaux mixture liquid.

• 자원ㆍ환경경제연구
• /
• 제16권3호
• /
• pp.653-682
• /
• 2007

In this study, multi-sectoral partial equilibrium and computable general equilibrium models of Taiwan are used to investigate the direct and indirect effects of energy price increases on overall economies and agro-food sector in Taiwan. The results suggest that agricultural prices, production cost would increase between 0.27% to 1.88%, and a reduction in GDP around 0.39% to 0.54 %. The negative impact on livestock sector is slightly higher than that on the crop sector. Negative impacts are also observed in the employment and wages. The rising oil price has the potential to discourage production of energy-intensive activity because of the possibility of substitution and adaptations. The growth rate of real GDP will shrink by 0.64% to 1.06% and CPI will increase by 1.17% to 1,95%. Both the agriculture and non-agricultural sector also respond by raising output prices by 0.80% to 1.33%. The rising international oil price has urged the government to take policy actions like using alternative fuels such as biodiesel, bioethanol, and adopting measures to cut down on energy consumptions mainly in transportation sectors in response to public concern over economic shocks.

• 한국지반신소재학회논문집
• /
• 제16권4호
• /
• pp.43-55
• /
• 2017

본 연구에서는 교통시설 하부구조인 옹벽(중력식 옹벽)에 가해지는 수평토압의 크기에 교통하중이 미치는 영향을 파악하였다. 교통시설 하부구조인 옹벽에서 상부 교통하중이 옹벽 안전성에 미치는 영향에 관한 연구가 부족한 실정이다. 교통하중으로 인해 옹벽에 유발되는 수평토압은 도로의 차선 수, 차량 하중의 크기 및 옹벽으로부터 떨어진 거리 등의 영향을 받을 것이다. 따라서 이들 변수를 대상으로 수치해석한 결과, 차량하중 이격거리가 옹벽 높이보다 클 경우 수평토압의 변화는 미미하였다. 따라서 상부에 교통하중을 받는 도로옹벽 설계 시 옹벽내측으로부터 교통하중까지의 이격거리가 옹벽의 높이 내의 교통하중만을 고려하는 것이 실용적이고 합리적이다.

• 대한안전경영과학회지
• /
• 제16권4호
• /
• pp.331-341
• /
• 2014

Internet of Thing(IoT), which is recently talked about with the development of information and communication technology, provides big data to all nodes such as companies and homes, means of transportation etc. by connecting all things with all people through the integrated global network and connecting all actual aspects of economic and social life with Internet of Thing through sensor and software. Defining Internet of Thing, it plays the role of a connector of providing various information required for the decision-making of companies in the cloud computing environment for the Insight usage by collecting and storing Raw Data of the production site through the sensor network and extracting big data in which data is accumulated and Insight through this. In addition, as the industry showing the largest linkage with other root industries among root industries, the mold industry is the core technology for controlling the quality and performance of the final product and realizing the commercialization of new industry such as new growth power industry etc. Recently, awareness on the mold industry is changing from the structure of being labor-intensive, relying on the experience of production workers and repeating modification without the concept of cost to technology-intensive, digitization, high intellectualization due to technology combination according to IT convergence. This study, therefore, is to provide a golden opportunity to increase the direct and indirect expected effects in poor management activities of small businesses by actually implementing and managing the entire process of mold life cycle to information system from mold planning to mass production and preservation by building SME(small and medium-sized enterprises)-type mold life cycle management information system in the cloud computing environment and applying it to the production site.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.13.1-13.1
• /
• 2009

Transparent electronics has attracted many interests, for it can open new applications for consumer electronics, transportation, business, and military. Among them, display backplane, thin film transistor (TFT) array would be the most attractive application. Many researchers have been investigating oxide semiconductors for transparent channel material of TFT since the report for transparent amorphous oxide semiconductor (TAOS) TFT by Hosono group and ZnO TFT by Wager group. Especially, oxide TFTs have been intensively investigated during a couple of years since the first demonstration of ZnO-TFT driving AM-OLED. Many papers regarding the fabrication and performance of oxide TFTs, and active matrix display driven by oxide TFTs have been reported. Now lots of people have confidence in the competitiveness of oxide TFTs for the backplane of AM-Display. Especially, high mobility, uniformity, fairly good stability, and low cost process make oxide TFTs applied even to a large size AM-OLED. Last year, Samsung mobile display, former SID, reported 12" AM-OLED driven by IZGO-TFT and it seems that the remained issue for the mass production is the bias temperature stability. Here, we will introduce the application of oxide TFT and important issue for oxide TFT to be used for the direct printing.

• 한국응급구조학회지
• /
• 제25권1호
• /
• pp.147-158
• /
• 2021

Purpose: This study was conducted as a direct investigation of the data in the dispatch logbooks and status of patient transportation provided by private emergency transport companies in Busan. Methods: This study was conducted using SPSS 23.0 version for a total of 1,000 processed records of private emergency ambulance services in Busan from September 23, 2017 to November 5, 2019. Results: First, 100% of the emergency patient transfers by private emergency ambulances were carried out between medical institutions; 76.4% of all transfer patients had emergency conditions, and 86.0% had serious diseases. Second, 59.3% of the emergency patients were located at distances less than 10 km and 43.2%, at more than 10 km from the medical institutions. Third, 63.5% of the passengers were accompanied by first-class emergency rescuers according to the severity of the condition. Fourth, 92.7% of the reasons for the selection of medical institutions were transferred to places where professional care was available, accounting for most of the reasons for the selection. Finally, the medical institutions were selected according to the severity of the patient's condition; 76.5% patients were transported to institutions with a large number of doctors, and 42.9% of those were transported to specialized care institutions. Conclusion: This study collected data from 1,000 dispatch records of private emergency transport companies in Busan; these records reflect the government's policies to improve the emergency patient transfer system. The current status of emergency patient transfer offered by private transport companies was analyzed. All of the emergency patient transfers were carried out between medical institutions, and 76% of the transferred patients had emergency conditions.

• 대한의용생체공학회:의공학회지
• /
• 제43권2호
• /
• pp.116-123
• /
• 2022

This study analyzes the Mechanical properties of a medical bone plate by 3D printing. With the recent development of 3D printing technology, it is being applied in various fields. In particular, in the medical field, the use of 3D printing technology, which was limited to the existing orthosis and surgical simulation, has recently been used to replacement bones lost due to orthopedic implants using metal 3D printing. The field of application is increasing, such as replacement. However, due to the manufacturing characteristics of 3D printing, micro pores are generated inside the metal printing output, and it is necessary to reduce the pores and the loss of mechanical properties through post-processing such as heat treatment. Accordingly, the purpose of this study is to analyze the change in mechanical performance characteristics of medical metal plates manufactured by metal 3D printing under various conditions and to find efficient metal printing results. The specimen to be used in the experiment is a metal plate for trauma fixation applied to the human phalanx, and it was manufactured using the 'DMP Flex 100(3D Systems, USA), a metal 3D printer of DMLS (Direct Metal Laser Sintering) method. It was manufactured using the PBF(Powder Bed Fusion) method using Ti6Al4V ELI powder material.

• 한국분무공학회지
• /
• 제27권2호
• /
• pp.84-93
• /
• 2022

To implement carbon-neutrality in transportation sectors until 2050, hydrogen is considered a promising fuel for internal combustion engines because hydrogen does not contain carbon itself. Although hydrogen does not emit CO₂ emission from its combustion process, the low energy density in a volume unit hinders the adoption of hydrogen. Therefore, the understanding of hydrogen jet behavior and measurement of equivalence ratio must be conducted to completely implement the high-pressure hydrogen direct injection. The main objective of this research is feasibility test of hydrogen local equivalence ratio measurement by laser-induced breakdown spectroscopy (LIBs). To visualize the macroscopic structure of hydrogen jet, high-speed schlieren imaging was conducted. Moreover, LIBs has been adopted to validate the feasibility of hydrogen local equivalence ratio measurement. The hydrogen injection pressure was varied from 4 MPa to 8 MPa and injected in a constant volume chamber where the ambient pressure was 0.5 MPa. The increased injection pressure extends the vertical penetration of hydrogen jet. Due to the higher momentum supply when the injection pressure is high, the hydrogen has easily diffused in all directions. As the laser trigger timing has delayed, the low hydrogen atomic emission was detected due to the longer mixture formation time. Based on equivalence ratio measurement results, LIBs could be applied as a methodology for hydrogen local equivalence ratio measurement.