• 한국농림기상학회지
• /
• 제23권4호
• /
• pp.283-294
• /
• 2021

경사면일사량은 수평면일사량과 해당위치 지형경사도 간의 기하학적 관계인 일사수광비율을 통해 추정할 수 있다. 그러나 이렇게 추정한 일사량은 주변에 햇빛을 차단하는 장애물이 없다는 것을 가정하기 때문에 만약 실제 농사를 짓고 있는 농장 등에 이를 적용할 경우에 지형으로 인한 차광 등의 영향을 충분히 반영하지 못한다. 음영기복도는 태양의 위치와 지형의 기복으로 인한 직달일사의 변이를 밝기(휘도)로 수치화한 격자 형태의 자료로서, 하나의 격자는 가장 어두운 값 0에서 가장 밝은 값 255까지의 값을 갖는다. 본 연구에서는 지형으로 인한 차광효과를 모의하기 위해 30m 해상도의 DEM을 이용하여 연구지역의 음영기복도를 제작하고 휘도 분석을 수행하였다. 연구지역에 설치된 AWS 22개 지점의 기상자료를 수집하여 일조율 80% 이상인 날을 선별하고, 관측일사량과 각 지점의 휘도를 비교하여 휘도가 지형으로 인한 차광효과를 설명할 수 있는지 확인하였다. 분석결과 휘도와 일사량 간에 상관관계가 있는 것을 확인하였으며, 지형의 영향이 큰 지점에서의 직달일사가 시작되는 시점과 끝나는 시점은 태양고도 보다는 휘도와 잘 부합하는 것으로 나타났다. 추가적인 연구를 통해 주변 지형의 영향을 반영한 휘도를 이용한 상세한 일사량 추정이 가능할 것으로 기대된다.

• 한국ITS학회 논문지
• /
• 제22권4호
• /
• pp.194-210
• /
• 2023

자율주행차량에서 핵심적인 역할을 수행하는 LiDAR는 운전자의 눈을 대신하여 주변 환경을 검지하는 데 활용되며, 그 역할이 점차 확대되고 있다. 이에 따라 최근에는 자율주행차량에 장착된 LiDAR의 성능을 시험하는 요구가 높아지고 있다. 많은 LiDAR 성능 시험은 시뮬레이션 및 실내환경에서 수행되고 있어, 실외환경 및 실도로 환경에서의 시험은 미미한 상황이다. 이에 본 연구는 LiDAR 성능을 실내와 실외에서 동일한 조건으로 비교하여, 실내외 시험 간의 관계를 확인하고, 각각의 특징과 역할을 정립하고자 하였다. 실험결과 조광환경(직사광선, 실내) 및 검지물체에 따라 LiDAR 검지성능이 달라지는 것을 확인하였다. 특히, 거리증가와 강우량 증가에 따른 Intensity 감소 영향은 실외에서 보다 크게 나타남에 따라 물체에 대한 LiDAR 검지 성능 시험 시 실내외 실험이 모두 필요함을 제시하였다. 본 연구의 결과는 LiDAR 센서활용 연구 수행 기관 및 LiDAR 대응 시설물 연구 기관에서 유용하게 활용될 것으로 기대된다.

• KIEAE Journal
• /
• 제14권1호
• /
• pp.15-22
• /
• 2014

Among the various building envelope elements, the glass area takes up the largest portion in the office building design. However, a large area of glass can cause problems such as excessive solar radiation, thermal comfort, and glare. Thus it is important to install the glass area to an appropriate level, and control solar radiation and inflow of daylight with blind devices. This study aims to improve the visual performance of the work plane through the automatic control of the venetian blinds. A total of eight kinds of control strategies were chosen; Case 1 does not control the blinds, Case 2 with the blind slats fixed at the angle of 0 degree, Case 3 to 6 using the existing blind control programs, and Case 7 and 8 with improved blind control. Case 3 with 90 degrees had the best energy performance, but the average indoor illuminance was 113lux, which is below the standards. Cases 4 and 5 showed higher levels of interior daylight illuminance with the average of 281lux and 403lux respectively. However, the fixed angles may have difficulties controlling excessive direct sunlight coming into the room and may cause glare. Cases 6 and 7 used sun tracking angle control and cut-off angle control, and the average interior illuminance was measured 250lux and 385lux respectively. Case 8 used the cut-off angle control in an hourly manner, satisfying the standard illuminance of 400lux with an average interior illuminance of 561lux. It was evaluated to be the best method to control direct solar radiation and to guarantee proper level of interior illumination.

• 현장농수산연구지
• /
• 제13권1호
• /
• pp.27-33
• /
• 2011

코팅소재별 벼 종자의 발아 및 입묘 특성을 구명하기 위하여 무처리, 규산코팅, 철분코팅, 규산복토 처리에서 유묘의 입모율, 경시적 입묘양상의 변화, 초장, 엽수, 생체중의 특성을 조사결과를 요약하면 다음과 같다. 1. 입모율은 무처리 95% 규산코팅 및 규산복토 92%, 철분코팅 77%로 각가 나타나 무처리에서 가장 높게 나타났지만 일반적으로 각종 제한요인(새 피해, 건조, 부묘현상 등)이 많은 포장조건에서는 무처리 조건이 상반된 결과가 나타나고 있으며 규산코팅 또는 복토조건에서 철분코팅보다 높은 입묘율을 보였다. 2. 벼 유묘의 초장에서는 무처리 11.4cm 규산코팅 10.8cm, 규산복토 8.8cm, 철분코팅 6.9cm으로 각각 나타났다. 3. 유묘의 생체중은 지상부의 경우 무처리 50mg, 규산코팅 및 규산복토 40mg, 철분코팅 30mg이었으며, 지하부의 경우 규산코팅 및 규산복토 20mg, 무처리 및 철분코팅 10mg으로 각각 나타났다.

• 현장농수산연구지
• /
• 제12권1호
• /
• pp.29-38
• /
• 2010

본 연구는 기존의 무논점파기의 문제점(새 피해, 파종한 종자의 건조현상, 강우 또는 관개 시 가벼운 볍씨 또는 어린 유묘의 뜨는 문제 등)으로 초기 입묘가 불량한 요인을 개선하기 위하여 시험을 추진하였으며 얻어진 결과는 다음과 같다. 1. 롤러 간의 피복재 사상(모래형) 규산질비료의 피복량이 일정치 않았다. 2. 기존의 무논점파 파종장치의 정확한 점파작업이 요구되었으며 파종작업 시 볍씨가 롤러 홈 회전과정에서 발생되는 파손이 인정되었으며 이에 대한 개선이 요구되었다. 3. 사상 규산질비료의 정밀한 피복작업이 미진하였으며 이를 위한 복토재의 개선(2mm내외 사상)과 파종작업장치의 정확성이 요구되었다. 4. 파종작업 시 바람이 강하게 불 경우 사상규산질비료의 피복위치 불안정으로 이에 대한 보완대책이 요구되었다.

• 한국태양에너지학회 논문집
• /
• 제27권3호
• /
• pp.175-179
• /
• 2007

This experimental demonstration has successfully shown that it is possible to use direct sunlight for the illumination of deeper building zones using the material for light path system(light duct). Three kinds of reflectors which were 95% Silver vaporizing fixed, 85% Anodized and 85% Hot melted applied to evaluate and compare their performances each others. Also, these three kind of reflectors were compared in view point of economics. The most high performance was obtained in 95% Silver vaporizing fixed reflector hater than another reflectors of 85% Anodized reflector and 85% Hot melted reflector even though more high production cost in 95% Silver vaporizing fixed reflector. The rest two reflectors of 85% Anodized and 85% Hot melted $10{sim}15%$ less performance than 95% Silver vaporizing fixed reflector but their production cost were low than the production cost of 95% Silver vaporizing fixed reflector which identified very weak and light yellow color in the light.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권1호
• /
• pp.91-97
• /
• 2009

It is undertaken systematization of results of satellite and ground observation parameters characterizing a current condition and climatic variability of two selected geographical areas. One of them covers territory of Azerbaijan and another covers a wide area of Caspian See region. Average values and mean square deviations of following values are investigated: outgoing long wave radiation during a day and night (in nebulosity and cloudless). absorbed within a day of the stream of a sunlight of the system in "a terrestrial surface-atmosphere". degree of a covering by clouds of the selected areas during a day and at night, ground temperature values of air. pressure and speed of a wind. Monthly average values of corresponding parameters create a basis of suggested investigations. It has been presented features of a time course of investigated parameters for each month and year in the whole due to the continuously observations since 1982-2000. The scientific problem consists that there are no existed models which authentically would be cover the main aspects of a realities specified changes: they are identified by economic activities. growth of the population and other features of development of a human society or internal fluctuations of biogeophysical/climatic system. Possibilities of predictability of biosphere and climate changes depend on available timely supervision. adequacy of construction of appropriate models. understanding of mechanisms of direct and feedback influences in such complicated systems.

• 한국실내디자인학회논문집
• /
• 제22권2호
• /
• pp.140-148
• /
• 2013

The purpose of this study is to examine the current status of allergic diseases associated with the housing environment and the psychological attitude of residents towards relevant risk factors. This study surveyed 1,200 people. In the first round, 200 participants were questioned through direct survey methods, while 1,000 participants filled out an online survey in the second round. Selected study subjects consisted of allergic diseases known to be closely related to housing environment factors. With advice from medical experts, the analysis included the examination of the prevalence status regarding five types of allergy-related diseases-allergic conjunctivitis, allergic rhinitis, allergic dermatitis, asthma and headache-with the range of disease incidence set within the past ten years. The survey was conducted on all age groups except those nine years old and younger, and the findings are as follows. Allergic diseases were found to be more prevalent among women than men. Residents identified effective methods for the alleviation and treatment of allergic diseases as ventilation, use of environmentally-friendly finishing materials, maintenance of a clean living space through cleaning or washing, and sunlight exposure. Residents' understanding of allergic diseases varied depending on their experience with such diseases and residential characteristics.

• Journal of Biosystems Engineering
• /
• 제39권4호
• /
• pp.352-356
• /
• 2014

Purpose: We estimated the dietary qualities of green soybean (edamame) by using a specialized NIR transmission spectrometer to determine the constitutive properties of the soybean, such as the sucrose content and ninhydrine reaction quantity (NRQ; defined by the ninhydrine reaction, which has a high positive correlation with the total free amino acids), with the purpose of establishing a quality assurance system. Methods: We used a newly developed spectrometer probe that enables in situ estimation of the constituents of the soybean. Results: The calibration results obtained using a wavelength range of 760-960 nm were characterized by $R^2$ = 0.57 and standard error of cross-validation (SECV) of 0.78% for sucrose, and $R^2$ = 0.59 and SECV = 0.35% for NRQ. Conclusions: These results are inferior to those of our previous study obtained using a specialized bench-type transmission spectrometer. The poorer results are attributed to several possible reasons, including the effect of direct sunlight and the unstable sample presentation. We plan to conduct further study using improved optical layout and sample presentation.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.402-405
• /
• 2006

Radiometric calibration of optical image data is necessary to convert raw digital number (DN) value of each pixel into a physically meaningful measurement (radiance). To extract rather quantitative information regarding biophysical characteristics of the earth surface materials, radiometric calibration is often essential procedure. A sensor detects the radiation of sunlight interacted atmospheric constituents. Therefore, the amount of the energy reaching at the sensor is quite different from the initial amount reflected from the surface. To achieve the target reflectance after atmospheric correct, an initial step is to convert DN value to at-sensor radiance. A linear model, the simplest radiometric model, is applied to averaged spectral radiance for this conversion. This study purposes to analyze the sensitivity of several factors affecting on radiance for carrying out absolute radiometric calibration of panchromatic images from KOMPSAT2 launched at July, 2006. MODTRAN is used to calculate radiance at sensor and reflectance of target is measured by a portable spectro-radiometer at the same time the satellite is passing the target for the radiometric calibration. As using different contents of materials composing of atmosphere, the differences of radiance are investigated. Because the spectral sensitivity of panchromatic images of KOMPSAT2 ranges from 500 to 900 nm, the materials causing scattering in visible range are mainly considered to analyze the sensitivity. According to the verified sensitivity, direct measurement can be recommenced for absolute radiometric calibration.