• 제목/요약/키워드: Direct spinning

검색결과 32건 처리시간 0.014초

New Classes of LC Resonators for Magnetic Sensor Device Using a Glass-Coated Amorphous CO83.2B3.3Si5.9Mn7.6 Microwire

  • Kim, Yong-Seok;Yu, Seong-Cho;Hwang, Myung-Joo;Lee, Hee-Bok
    • Journal of Magnetics
    • /
    • 제10권3호
    • /
    • pp.122-127
    • /
    • 2005
  • New classes of LC resonators for micro magnetic sensor device were proposed and fabricated. The first type LC resonator (Type I) consists of a small piece of microwire and two cylindrical electrodes at the end of the microwire without direct contact to its ferromagnetic core. In type I resonator the ferromagnetic core of the microwire and cylindrical electrodes act as an inductor and two capacitors respectively to form a LC circuit. The second type LC resonator (Type II) consists of a solenoidal micro-inductor with a bundle of soft magnetic microwires as a core. The solenoidal micro-inductors fabricated by MEMS technique were $500\sim1,000\;\mu{m}$ in length with $10\sim20$ turns. A capacitor is connected in parallel to the micro-inductor to form a LC circuit. A tiny glass coated $CO_{83.2}B_{3.3}Si_{5.9}Mn_{7.6}$ microwire was fabricated by a glass-coated melt spinning technique. A supergiant magneto-impedance effect was found in a type I resonator as much as 400,000% by precise tuning frequency at around 518.51 MHz. In type II resonator the changes of inductance as a function of external magnetic field in micro-inductors with properly annealed microwire cores were varied as much as 370%. The phase angle between current and voltage was also strongly dependent on the magnetic field. The drastic increments of magnetoimpedance at near the resonance frequency were observed in both types of LC resonators. Accordingly, the sudden change of the phase angle, as large as $180^{\circ}C$, evidenced the occurrence of the resonance at a given external magnetic field.

선박폐수 처리공정의 개발에 관한 사례 (A Case Study on the Development of New Process for Treatment of Waste Waters from Ships)

  • 최상모;허인석;양석준
    • 해양환경안전학회지
    • /
    • 제15권1호
    • /
    • pp.71-78
    • /
    • 2009
  • 해양환경관리공단은 MARPOL 73/78에 따른 해양환경 보전을 위하여 1998년 정부로부터 전국 13개 주요 항만에 위치한 선박폐수 처리시설을 위탁받아 운영해왔다. 이 시설은 선박폐수를 처리함에 있어 단순히 해양환경관리법에서 정한 유분농도(n-H 광유류) 15ppm을 충족할 수 있도록 설계되어 운영되어 왔다. 그러나 선박폐수에는 n-H 광유류 뿐만 아니라 유기물에 의한 악취와 각종 불순물이 함유되어 있기 때문에 이들이 처리되지 않고 그대로 해양에 배출됨으로써 해양오염은 물론 주변 인가 등으로부터 민원의 대상이 되었다. 이에 따라 공단은 지난 2007년 선박폐수 처리공정 개선 작업을 시행하여 새로운 수처리 약품을 개발하여 적용하고, 오존을 이용하여 기존의 공정을 3${\sim}$4 단계 줄이면서도 배출수의 유분농도 뿐만 아니라 콜로이드물질, ABS, 인, 질소 등 난분해성 유기물질과 미생물 분해에 의한 악취를 효과적이고 혁신적으로 저감 시킬 수 있는 새로운 공정을 개발하여 현장에 적용시켰다. 새로운 공정은 각종 오염물질과 악취를 획기적으로 제거할 뿐만 아니라 공정의 단순화를 통해 시설 유지비 10% 이상 절감 등 13개 선박폐수 처리시설 운영비를 매년 1억6천만원 이상 줄일 수 있는 획기적인 공정으로 방법특허를 출원하였다.

  • PDF