• International Area Studies Review
• /
• v.20 no.2
• /
• pp.85-111
• /
• 2016

Global semiconductor companies is investing enormous capital worldwide. And direct investment in China is increasing greatly these days, Especially, global semiconductor companies are setting up a factory in China due to expanding market rather than utilizing low labor cost. Therefore, this study is trying to analyze the background and process of direct investment from global Korean and Taiwanese semiconductor companies in China. Firstly, In 1996, Samsung semiconductor established a back end process factory in Suzhou. And in 2014, Samsung semiconductor set up a front and back end factory in Xian. Secondly, In 2006, SK Hynix built a front and back end factory in Wuxi. and SK Hynix set up a back end factory named Hitech semiconductor with Chinese company in 2009. Later in 2015, SK Hynix established a back end factory in Chongqing. Thirdly, In 2004, TSMC started to operate a factory in Shanghai, and in 2018, TSMC is going to establish a factory in Nanjing. Lastly, UMC bought a stock to produce product in Chinese local company named HJT, and at the end of 2016, UMC is going to finish building a factory in Xiamen. As a result, it was proved that most companies hoped to expand the chinese market by setting up a factory in china. In addition, Samsung expected to avoid a risk by setting up a factory in china, and SK Hynix wanted to avoid a countervailing duty by setting up a factory in china. Based on the result of this study, this study indicates some implications for other semiconductor companies which are very helpful for their future foreign direct investment.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.1
• /
• pp.38-46
• /
• 2005

In this research, we tried to combine the coagulation/sedimentation process as pre-treatment with UF membrane filtration to reduce the membrane fouling and to improve the permeate water quality. We used the Jet Mixed Separator (JMS) as coagulation/sedimentation process. We observed that the HPC and E.Coli can't be removed through the direct UF memebrane filtation of surface water. The removal efficiency of dissolved organic substances, indicated by E260 and DOC, was 40% and 15%, respectively. However, the removal efficiency of it increased two time as a result of combination of JMS process as coagulation/sedimentation pre-treatment. This was resulted from the formation of high molecular humic micro-floc through JMS process. The accumulation amount of irreversible cake layer which was not removed by backwashing was less than direct UF membrane filtration of surface water. Moreover, the loading rate of fouling induced substances, such as humic substances and suspended substances, on membrane surface decreased drastically through JMS process. As a result, the accumulation amount of irreversible cake on membrane surface was decreased.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.393-397
• /
• 2005

A process map has been developed, which can identify the process conditions for weak mechanical bonding at the contact surface during the direct extrusion of a Cu-Ti bimetal wire bundle. Bonding mechanism between Cu and Ti is assumed as a cold pressure welding. Then, the plastic deformation at the contact zone causes mechanical bonding and a new bonding criterion fur pressure welding is developed as a function of the principal stretch ratio and normal pressure at the contact surface by analyzing micro local extrusion at the contact zone. The averaged deformation behavior of Cu-Ti bimetal wire is adopted as a constitutive behavior at a material point in the finite element analysis of Cu-Ti wire bundle extrusion. Various process conditions for bundle extrusions are examined. The deformation histories at the three points, near the surface, in the middle and near the center, in the cross section of a bundle are traced and the proposed new bonding criterion is applied to predict whether the mechanical bonding at the Cu-Ti contact surface happens. Finally, a process map for the direct extrusion of Cu-Ti bimetal wire bundle is proposed.

• Journal of Korea Foundry Society
• /
• v.24 no.1
• /
• pp.3-9
• /
• 2004

Die casting is "a process in which molten metal is injected at high velocity and pressure into a mold(die) cavity". Casting with smooth surfaces, high dimensional precision, complicated shapes, and reduced weight can be obtained using this process. But this process is susceptible to casting defects such as porosities, scattered chilled layers, hard spots, etc. For preventing casting defects, we developed "low-velocity high pressure die casting technology", "squeeze die casting technology", "heat insulating sleeve lubricant technology", and "direct pouring technology". The "direct pouring technology" is useful for producing molten metal without oxide contamination. It consists of a pumping system which supplies pure molten metal to the die casting machine. By using this technology, we have successfully reduced oxide contamination in castings to 1/20 of that of our previous castings.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.3
• /
• pp.257-262
• /
• 1983

The performance of a direct-injection type diesel engine often depends on the shape of combustion chamber, strength of swirl or squish, the number of nozzle holes, etc. This is of course because the process of combustion in the cylinder was affected by the mixture formation process. In this paper, the relation betweeen the flame progress and the performance of engine was clarified by changing variously the combustion process in cylinder with a special method, and thus the measures for improving the combustion were indirectly examined. Namely it was investigated what effect the flame progress in cylinder, which was varied with the locality of the lean premixture injected by the auxiliary injection method using an auxiliary injection nozzle in advance at the place where main spray was injected later, has on the engine output, the exhaust smoke density and the NO concentration in exhaust gas.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.5
• /
• pp.68-74
• /
• 2015

In the present work, a series of numerical calculations have been conducted on the cooling of a hot surface using an air/water mist jet. In some cooling processes, such as in the glass-tempering process, direct contact between the cold water drops and the hot surface should be avoided, because this may cause surface cracks due to the sharp temperature gradients. Thus, the main focus of this study is finding the appropriate operating conditions for maximum cooling without direct contact between the drops and the surface. A series of numerical experiments have been performed, and, at the same time, those results were compared with those of the previous experiments for verification purposes. The effects of droplet impinging velocity, hot plate temperature, and liquid loading ratio for mono-dispersed drops of various sizes were studied in detail.

• Journal of Welding and Joining
• /
• v.23 no.6
• /
• pp.77-86
• /
• 2005

Low temperature bonding of the silicon and glass using the Spin-on Glass (SOG) has been conducted experimentally to figure out the effects of the SOG solution composition and process variables on bond strength using the Design of Experiment method. In order to achieve the high quality bond interface without rack, sufficient reaction time of the optimal SOG solution composition is needed along with proper pressure and annealing temperature. The shear strength under the optimal SOG solution composition and process condition was higher than that of conventional anodic bonding and similar to that of wafer direct bonding.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.9
• /
• pp.2403-2411
• /
• 1997

Direct3D is a recently developed 3D graphic accelerator such that we could make a Windows graphic programs with Direct3D easily. This paper presents the fractal terrain model viewer developed in terms of Direct3D. The object classes and the input dialog box used the model viewer, program initializing process, and the flow of the model viewer are discussed. Finally, the output of terrain formulation in wire-frame, solid, and point type form are presented. To show the results, the data of a terrain model were made by a fractal technique, the midpoint displacement methods with square lattices of points.

• Journal of Distribution Science
• /
• v.18 no.2
• /
• pp.29-38
• /
• 2020

Purpose: Finding out major factors on motivation to purchase Korean products through the analysis of overseas direct purchase in China and through empirical analysis, strategic implications or specific action plans and significance of the overseas direct purchase are investigated out. Research design, data, and methodology: In the process, to make more effective analysis, several analysis tools and analysis programms are used, IBM SPSS Statistics 23.0 and IBM SPSS AMOS 23.0 with 264 questionnaires. Conclusions: Among the factors of the overseas direct purchase, all variables (product diversity, brand image, information validity, convenience, easy payment) are available on satisfaction and repurchase intention. They have affirmative impacts on the satisfaction and repurchase intention. And the satisfaction has a positive impact on the repurchase intention. The brand images and the product diversity of Korean products can induce consumers to visit again and improve managerial performance. In the future, the brand image and ways of purchasing behaviors improve the truthfulness of consumers. Results: The significance of this study is to find out 5 key factors through overseas direct purchase. And we should try to apply the implications drawn from the findings as marketing strategy. So finally we should focus on widening, enlarging and enriching China market gradually.

• BMB Reports
• /
• v.40 no.3
• /
• pp.444-447
• /
• 2007

Polymerase chain reaction (PCR) is a powerful technique in molecular biology and is widely used in various fields. By amplifying DNA fragments, PCR has facilitated gene cloning procedures, as well as molecular genotyping. However, the extraction of DNA from samples often acts as a limiting step of these reactions. In particular, the extraction of PCR-compatible genomic DNA from higher plants requires complicated processes and tedious work because plant cells have rigid cell walls and contain various endogenous PCR inhibitors, including polyphenolic compounds. We recently developed a novel solution, referred to as AnyDirect, which can amplify target DNA fragments directly from whole blood without the need for DNA extraction. Here, we developed a simple lysis system that could produce an appropriate template for direct PCR with AnyDirect PCR buffer, making possible the direct amplification of DNA fragments from plant leaves. Thus, our experimental procedure provides a simple, convenient, non-hazardous, inexpensive, and rapid process for the amplification of DNA from plant tissue.