• The Journal of Advanced Prosthodontics
• /
• 제12권3호
• /
• pp.167-172
• /
• 2020

PURPOSE. The aim of the present study was to investigate the passive fit of metal substructure after repetitive firing processes in implant-supposed prosthesis. MATERIALS AND METHODS. Five implants (4 mm diameter and 10 mm length) were placed into the resin-based mandibular model and 1-piece of screw-retained metal substructure was produced with the direct metal laser sintering (DMSL) method using Co-Cr compound (n = 10). The distance between the marked points on the multiunit supports and the marginal end of the substructure was measured using a scanning electron microscope (SEM) at each stage (metal, opaque, dentin, and glaze). 15 measurements were taken from each prosthesis, and 150 measurements from 10 samples were obtained. In total, 600 measurements were carried out at 4 stages. One-way ANOVA test was used for statistical evaluation of the data. RESULTS. When the obtained marginal range values were examined, differences between groups were found to be statistically significant (P<.001). The lowest values were found in the metal stage (172.4 ± 76.5 ㎛) and the highest values (238.03 ± 118.92 ㎛) were determined after glaze application. When the interval values for groups are compared with pairs, the differences between metal with dentin, metal with glaze, opaque with dentin, opaque with glaze, and dentin with glaze were found to be significant (P<.05), whereas the difference between opaque with metal was found to be insignificant (P=.992). CONCLUSION. Passive fit of 1-piece designed implant-retained fixed prosthesis that is supported by multiple implants is negatively affected by repetitive firing processes.

• The Journal of Advanced Prosthodontics
• /
• 제7권2호
• /
• pp.122-128
• /
• 2015

PURPOSE. To assess the marginal and internal gaps of the copings fabricated by computer-aided milling and direct metal laser sintering (DMLS) systems in comparison to casting method. MATERIALS AND METHODS. Ten metal copings were fabricated by casting, computer-aided milling, and DMLS. Seven mesiodistal and labiolingual positions were then measured, and each of these were divided into the categories; marginal gap (MG), cervical gap (CG), axial wall at internal gap (AG), and incisal edge at internal gap (IG). Evaluation was performed by a silicone replica technique. A digital microscope was used for measurement of silicone layer. Statistical analyses included one-way and repeated measure ANOVA to test the difference between the fabrication methods and categories of measured points (${\alpha}$=.05), respectively. RESULTS. The mean gap differed significantly with fabrication methods (P<.001). Casting produced the narrowest gap in each of the four measured positions, whereas CG, AG, and IG proved narrower in computer-aided milling than in DMLS. Thus, with the exception of MG, all positions exhibited a significant difference between computer-aided milling and DMLS (P<.05). CONCLUSION. Although the gap was found to vary with fabrication methods, the marginal and internal gaps of the copings fabricated by computer-aided milling and DMLS fell within the range of clinical acceptance (< $120{\mu}m$). However, the statistically significant difference to conventional casting indicates that the gaps in computer-aided milling and DMLS fabricated restorations still need to be further reduced.

• 패션비즈니스
• /
• 제21권5호
• /
• pp.109-121
• /
• 2017

In this study, we proposed the Bustier which improves the fit and functionality to compensate the physical defects by maximizing the volume up effect using the breast detailed measurements and shapes of the poor breast female subjects. Based on the preliminary study of the problem and preference according to the characteristics of the poor breast women consumers, we produced 1/2 volume mold cups based on the previous research. Respectively. A total of 5 subjects were selected, and new 3 bustier patterns based on the pattern making system of industry were created through direct measurement and shapes. As a result of verifying the usability of the developed bustier by testing the commercially available bustiers and the newly developed bustiers for 5 subjects. In order to compare the existing bustiers with the newly developed bustiers, the appearance evaluation by the expert, the evaluation of the adaptability and satisfaction by the subjects were utilized. Through this experiment, the newly developed bustiers were superior in the evaluation of the motion adaptability and wear comfort as well as appearance test. It was shown that the wear effect of the bustier with the longest back length was the best.

• 대한간호학회지
• /
• 제45권6호
• /
• pp.802-811
• /
• 2015

Purpose: The purpose of this study was to test and validate a model to predict living and brain death organ donation intention in nursing students. The conceptual model was based on the theory planned behavior. Methods: Quota sampling methodology was used to recruit 921 nursing students from all over the country and data collection was done from October 1 to December 20, 2013. Results: The model fit indices for the hypothetical model were suitable for the recommended level. Knowledge, attitude, subjective norm and perceived behavioral control explained 40.2% and 40.1% respectively for both living and brain death organ donation intention. Subjective norm was the most direct influential factor for organ donation intention. Knowledge had significant direct effect on attitude and indirect effect on subjective norm and perceived behavioral control. These effects were higher in brain death organ donation intention than in living donation intention. Conclusion: The overall findings of this study suggest the need to develop systematic education programs to increases knowledge about brain death organ donation. The development, application, and evaluation of intervention programs are required to improve subjective norm.

• 한국컴퓨터정보학회논문지
• /
• 제17권10호
• /
• pp.185-192
• /
• 2012

콜센터는 고객과의 접촉에 있어 비대면 채널에 의해 커뮤니케이션이 이루어지기 때문에 대면 접촉에 의한 것보다 더 많은 상담사의 능력을 요구한다. 이러한 상담사의 능력개발을 위해 콜센터들은 경력과 직무에 따라 다양한 교육훈련을 실시하고 있으며, 교육훈련의 성과로 상담품질이나 생산성 향상을 실현하고자 한다. 한편, 교육훈련에는 많은 시간과 예산이 투입되기 때문에 교육훈련의 평가를 통해 현업수행에 도움이 얼마나 되고 있는지 그 효과성이 파악되고 관리되어야 할 것이다. 지금까지의 교육훈련의 평가에 대한 연구들을 보면 만족도와 학습정도를 측정하거나 학습이 행동에 전이되는 정도를 측정하는 연구가 주류를 이루어 전체적인 평가모형에 관한 연구가 필요하다. 본 연구에서는 콜센터교육훈련의 효과성을 상담사들의 인식수준에서 Kirkpatrick의 4단계 평가모형을 반영하여 반응, 학습, 행위, 결과에 대한 각 단계별 평가기준 간에 어떠한 영향관계가 있는지 알아보고, 구조방정식 모델을 사용하여 전체적인 모형의 적합도를 살펴보았다, 또한 대안모형으로 반응요인과 행위요인의 직접적인 관계를 고려하여 연구모형과 대안모형의 구조모델 적합도를 비교 분석하였다.

• 말소리와 음성과학
• /
• 제15권3호
• /
• pp.59-67
• /
• 2023

본 연구는 연장음의 길이에 따른 비유창성 지각 정도에 대해 각각 등간척도와 직접크기평정을 통한 청지각적 평가를 실시한 후, 두 평가의 결과치가 선형적인 또는 비선형적인 관계를 보이는지를 알아보고자 진행되었다. 이를 통해 연장음의 길이에 따른 비유창성 지각 정도에 대한 적절한 평가 방법을 제안하고자 하였다. 이를 위해 한국어를 모국어로 하는 만 19세 이상 성인 남녀 34명(남: 9명, 여: 25명, 평균연령: 32.9세)이 평가자로 참여였다. 실험참여자는 먼저 한국어 평마찰음 /s/를 원래 길이에서 80 ms씩 연장하여 2,000 ms(i.e., 285 ms, 365 ms., ..., 2,125 ms, 2,205 ms)까지 연장 변조한 총 25개의 자극이 들어 있는 문장을 듣고, 등간척도(1-7점, 1은 '정상', 7은 '심도')로 평가하였다. 이후에 등간척도 평가 결과, '경중도'(4점)에 해당하는 음성샘플을 선정해 이를 기준 평가치(modulus)로 하여 직접크기평정을 실시하였다. 두 평가 결과치에 대한 산포도를 작성한 후, 모형 분석을 통해 두 측정치 간의 관계가 선형적(linear)인지 비선형적(curvilinear)인지 R²값을 통해 조사하였다. 연구 결과, 두 평가 결과치의 관계가 비선형적인 양상을 보이는 것으로 나타났으며 이는 연장음의 길이에 따른 비유창성 정도 평가에 있어 등간척도보다는 직접크기평정이 적절한 평가 방법임을 보여주는 결과이다.

• 마케팅과학연구
• /
• 제17권2호
• /
• pp.55-73
• /
• 2007

문화관광축제는 전국의 지역축제 가운데 광역시 도에서 추천한 축제 가운데 관광상품성이 크고, 경쟁력 있는 우수한 축제를 선정하여 지원하는 사업이다. 문화관광축제 종합평가계획(문화관광부, 2006)에 의하면 방문객의 만족도 평가, 전문위원 평가, 그리고 축제 개선실적 등을 감안하여 최우수축제, 우수축제, 유망축제, 예비축제로 선정되고 있다. 특히 예비축제를 제외한 문화관광축제는 공공부문의 사업비 지원을 받기 때문에 1,000여 개가 넘는 지역축제의 방문객 만족도 평가는 상호비교가 가능한 평가척도를 이용하여 종합평가분석이 이루어진고 있다. 이러한 견지에서 본 연구에서는 문화관광축제 공통평가속성이 방문객 만족과 사후행동의도에 미치는 영향관계를 파악하여, 향후 축제기획 시 방문객 만족도 제고와 지속가능한 문화관광축제로 선정되기 위한 시사점을 제시하였다. 본 연구에서는 이론연구를 통하여 문화관광축제 평가속성, 만족, 그리고 행위의도에 관한 변수를 도출하였으며, 2006 광주김치대축제 방문객을 대상으로 실증분석을 수행하였다. 문화관광축제 평가속성에 대한 요인분석을 통하여 홍보안내, 행사내용, 기념품 음식, 편의시설 요인을 도출하였으며, 축제방문객 만족과 행동의도와의 관계를 분석하였다. 연구모형을 통해 수립한 연구가설은 차이분석, 회귀분석, 공분산 구조분석 등을 통해 검증하였으며, 연구결과 모든 가설은 채택되었다. 향후 본 연구결과를 바탕으로 본 축제와 성격이 유사한 축제방문객 분석을 통한 비교연구를 기대한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.261-267
• /
• 2011

The test fit has commonly used for the evaluation of the railbed condition, and indirect methods by using the compressional wave are also studied. the direct evaluation method by penetration test has not been studied. For the measurement of in-situ cone tip resistance of the railbed with minimizing the disturbance of the upper railbed. the cone penetrometer with the helical type outer rod(CPH) was developed. The outer rod, which has helical screw, is penetrated through the gravel layer and provides the reaction force for cone penetration testing. the cone tip resistances are measured by the mini cone penetrometer, where diameter is 15mm. For the developing the mini cone, strain gauge installation, circuit configuration, penetration rates and calibration process are considered. For the easy penetration of the screw rod in the field, the reaction force stepping plate and guide column are arranged. The screw rod are penetrated through the gravel layer. And the mini cone was pushed into the subgrade railbed at the penetration rate of 1mm/sec. The penetration test shows that the cone tip resistance increases along the depth. In addition, the subgrade condition is evaluated. This study demonstrates that the CPH may be effectively used for the evaluation of subgrade method any damage of the gravel layer.

• 패션비즈니스
• /
• 제18권6호
• /
• pp.188-207
• /
• 2014

The purpose of this research was to examine the extent of deontological (values) and teleological evaluation (considering consequences) used in arriving at an ethical judgment concerning intention to purchase a fashion counterfeit. In addition, the effect of psychographic (attitudes toward counterfeiting, risk taking, self-image, value consciousness, public self-consciousness, and materialism) and product attributes (perceived fashion content, physical appearance, and image) on intention to purchase a counterfeit product were investigated. Two alternatives and possible consequences as well as the scenario were given to the participants. The first alternative is persuading a friend not to buy a counterfeit and the second alternative is purchasing a counterfeit product with a friend. Participants (n = 245) were undergraduate volunteers enrolled in courses at a Midwestern university. Data were analyzed using confirmatory factory analysis and structural equation modeling. The proposed structural models fit the data adequately in both alternatives, and all paths were significant. Participants followed the decision making steps outlined by Hunt and Vitell (1986) in both alternatives. Personal characteristics exerted no influence on behavioral intentions concerning counterfeits. Two product-related characteristics (i.e., physical appearance of a counterfeit and projected image of a counterfeit) had direct effects on the behavioral intentions. The conclusions of this research are helpful in improving our understanding of variables that influence consumers' purchasing counterfeit luxury products.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권12호
• /
• pp.1836-1843
• /
• 2019

Objective: Social genetic effects (SGE) are an important genetic component for growth, group productivity, and welfare in pigs. The present study was conducted to evaluate i) the feasibility of the single-step genomic best linear unbiased prediction (ssGBLUP) approach with the inclusion of SGE in the model in pigs, and ii) the changes in the contribution of heritable SGE to the phenotypic variance with different scaling ${\omega}$ constants for genomic relationships. Methods: The dataset included performance tested growth rate records (average daily gain) from 13,166 and 21,762 pigs Landrace (LR) and Yorkshire (YS), respectively. A total of 1,041 (LR) and 964 (YS) pigs were genotyped using the Illumina PorcineSNP60 v2 BeadChip panel. With the BLUPF90 software package, genetic parameters were estimated using a modified animal model for competitive traits. Giving a fixed weight to pedigree relationships (${\tau}:1$), several weights (${\omega}_{xx}$, 0.1 to 1.0; with a 0.1 interval) were scaled with the genomic relationship for best model fit with Akaike information criterion (AIC). Results: The genetic variances and total heritability estimates ($T^2$) were mostly higher with ssGBLUP than in the pedigree-based analysis. The model AIC value increased with any level of ${\omega}$ other than 0.6 and 0.5 in LR and YS, respectively, indicating the worse fit of those models. The theoretical accuracies of direct and social breeding value were increased by decreasing ${\omega}$ in both breeds, indicating the better accuracy of ${\omega}_{0.1}$ models. Therefore, the optimal values of ${\omega}$ to minimize AIC and to increase theoretical accuracy were 0.6 in LR and 0.5 in YS. Conclusion: In conclusion, single-step ssGBLUP model fitting SGE showed significant improvement in accuracy compared with the pedigree-based analysis method; therefore, it could be implemented in a pig population for genomic selection based on SGE, especially in South Korean populations, with appropriate further adjustment of tuning parameters for relationship matrices.