• Korea Journal of Hospital Management
• /
• v.25 no.3
• /
• pp.14-28
• /
• 2020

Purpose: The purpose of this study was to calculate the total daily nursing workload and the optimum number of nurses per intensive care unit (ICU) based on the nursing intensity and the direct nursing time per inpatient using the patient classification. Methods: Two ICUs at one general hospital were investigated. To calculate the nursing intensity, patient classification according to the nursing needs was conducted for 10 days in each unit during September 2018. We performed patient classifications for a total of 167 patient-days in the Medical Intensive Care Unit (MICU) and 86 patient-days in the Surgical Intensive Care Unit (SICU). The total number of person-days for nurses who responded to the Nursing Time survey was 151 for MICU and 85 for SICU. In each unit, direct and non-direct nursing hours, nursing intensity score, and direct nursing hours were analyzed using descriptive statistics such as frequency, percentage, and average calculated using Microsoft Excel. The amount of nursing workload and the optimum number of nurses were calculated according to the formula developed by the authors. Findings: For the MICU, the average direct nursing time per patient was 5.59 hours for Group 1, 6.98 hours for Group 2, and 9.28 hours for Group 3. For the SICU, the average direct nursing time per patient was 5.43 hours for Group 1, 7.21 hours for Group 2, 9.75 hours for Group 3, and 12.82 hours for Group 4. Practical Implications: This study confirmed that the appropriate number of nurses was not secured in the nursing unit of this study, and that leisure time such as meal time during nursing work hours was not properly guaranteed. The findings suggest that to create working environments where nurses can serve for extended periods of time without compromising their professional standards, hospitals should secure an appropriate number of nurses.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3467-3472
• /
• 2007

The effects of the wall geometry on the spray-wall impingement process of a hollow-cone fuel spray emerging from a high-pressure swirl injector of the Gasoline Direct Injection (GDI) engine were investigated by means of a numerical method. The ized Instability Sheet Atomization (LISA) & Aerodynamically Progressed Taylor Analogy Breakup (APTAB) model for spray atomization process and the Gosman model were applied to model the atomization and wall impingement process of the spray. The calculation results of spray characteristics, such as a spray development process and a radial distance after wall impingement, compared with the experimental ones by the Laser Induced Exciplex Fluorescence (LIEF) technique. It was found that the radial distance of the cavity angle of 90$^{circ]$ after wall impingement was the shortest and the ring shaped vortex was generated near the wall after spray-wall impingement process.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.756-760
• /
• 2001

Two different designs of permanent magnet motors as direct wheel-set drive for the German high speed train ICE 3 are designed, one with surface mounted magnets (SM) and one with buried rotor magnets (BM). The surface magnet motor has $17\%$ less mass and a slightly higher efficiency and was therefore chosen for further investigations. Compared with the conventional drive system of the ICE 3, consisting of geared inverter fed induction machines, the gearless permanent magnet direct drive yields about $16\%$ lower losses. This calculation is based on the route parameters of the high speed track between Frankfurt/Main and Cologne in Germany, which is currently under construction.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.1
• /
• pp.20-26
• /
• 2015

It is very difficult to design an underwater communication system because of multipath, Doppler effects, noise, and attenuation. These factors lead to errors in the communication performance and maximum propagation distance. In this study, we calculate the distance that can be realized using the direct-sequence code division multiple access (DS-CDMA) technique with direct-sequence spread spectrum (DSSS) in an underwater communication system considering only the attenuation and noise. We also compare the estimated and calculated propagation distances obtained for several different scenarios.

• Journal of computational fluids engineering
• /
• v.4 no.3
• /
• pp.63-70
• /
• 1999

A Direct simulation Monte-Carlo (DSMC) code is developed, which employs the Monte-Carlo statistical sampling technique to investigate hypersonic rarefied gas flows accompanying chemical reactions. The DSMC method is a numerical simulation technique for analyzing the Boltzmann equation by modeling a real gas flow using a representative set of molecules. Due to the limitations in computational requirements. the present method is applied to a flow around a simple two-dimensional object in exit velocity of 7.6 km/sec at an altitude of 90 km. For the calculation of chemical reactions an air model with five species (O₂, N₂, O, N, NO) and 19 chemical reactions is employed. The simulated result showed various rarefaction effects in the hypersonic flow with chemical reactions.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.584-595
• /
• 1991

In the direct rolling processes for the mushy state alloy, a mushy state material which simultaneously contains liquid-solid phase is obtained from the exit port of stirring apparatus with a given solid fraction. This solid fraction is dependent on the temperature of within the solid-liquid range which shows to be controlled accurately by the experimental conditions for a given stirring apparatus. Rolling conditions for fabrication the fine surface strip were obtained from direct rolling experiment with mushy state alloys of Sn-75%Pb and aluminum alloy. Influence of solid fraction, rolling speed and initial roller gap on the state of strip surface and solidified structure was observed. We proposed theoretical model for prediction of rolling force, and we compared calculation result and experimental value measured with load cell.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1265-1268
• /
• 1996

This paper describes a new pulse width modulation (PWM) scheme suitable for microprocessor-based PWM inverters. Optimal switching patterns minimizing the performance index corresponding to the distortion factor are decided in real time by numerical calculation using the microprocessor-implemented control system. This PWM method is compared with conventional methods, such as the natural PWM and the direct PWM. Harmonic analysis using digital simulations shows that the proposed PWM scheme has much less low-order harmonics than the other methods. The validity of this method is verified in experiments using a microprocessor-based control system, where a 16-bit single-chip microcontroller, Intel 80c196kc is used.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.384-387
• /
• 2003

A new Direct Nonlinear Strut-Tie Model design method performing iterative calculations using secant stiffness was developed. Since basically the proposed design method uses elastic analysis, it has the advantages of convenience and stability in numerical analysis. At the same time, the proposed design method can accurately estimate the strength and ductility demands on the members because it analyzes the inelastic behavior of structure using iterative calculation. In the present study, the procedure of the proposed design method was established, and a computer program incorporating the proposed method was developed. The proposed design method, as an integrated method of analysis and design, can address the earthquake design strategy devised by the engineer, such as ductility limit on each member. Through iterative calculations on the structure preliminary designed with member sizes, the strength and ductility demands of each member can be estimated so that they satisfy the given design strategy, and as the result economical and safe design is achieved.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.376-379
• /
• 1989

In this paper a direct adaptive control scheme which minimizes N-step cost function is proposed. It is derived via GPC control algorithm under the assumption that we know N-step unit step response of the given system. The proposed adaptive scheme is shown to have the same stability properties with the RHTC control, and require very small amount of calculation compared with other adaptive algorithms which minimize N-step cost function. And it is shown through simulations that the proposed adaptive algorithm is robust to the variation of the unit step response which is assumed to be known.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.12
• /
• pp.1375-1382
• /
• 2009

The objective of this paper is to apply the load ratio method to the measurement of the crack length of the real scale pipe specimen. The load ratio method was modified and finite element analyses were performed to derive the relationship between the normalized compliance and the normalized crack length for the pipe specimen. In order to measure the crack length, the direct current potential drop method and the modified load ratio method were applied to the pipe test. The applicability of the modified load ratio method was confirmed by comparing the calculated crack length with the measured crack length from the pipe experiment.