• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4297-4303
• /
• 2011

Under solvent-free conditions, the synthesis of propargylic alcohols by direct addition of terminal alkynes to aldehydes promoted by ZnO as a novel, commercially, and cheap catalyst is described. Furthermore, the catalyst can be reused for several times without any significant loss of its catalytic activity.

• 청정기술
• /
• 제22권3호
• /
• pp.196-202
• /
• 2016

DMC (dimethyl carbonate)를 합성하기 위하여 ceria 계열의 촉매를 이용하여 반응 조건을 확인하는 연구를 수행하였다. 촉매의 합성 조건을 찾기 위하여 소성 온도와 Cu(II)의 함량을 조절하였고, 완성된 촉매는 NH₃-TPD를 이용하여 반응성(산점)을 확인하였다. DMC를 합성하기 위하여, 산화카르보닐화법(oxidative carbonylation, 일산화탄소와 산소를 메탄올과 반응)과 직접합성법(direct synthesis, 이산화탄소를 메탄올과 반응)을 적용하였다. 르샤틀리에의 원리에 따라, 반응 중 생성되는 물을 제거하여 반응성(메탄올 전환율)을 향상시키고자 하였으며, 이를 위해 화학적 탈수제(chemical dehydration agent)인 2-cyanopyridine를 사용하였다. 화학적 탈수 반응을 산화카르보닐화법에 적용하였을 경우, 메탄올 전환율은 15.1%에서 38.7%, DMC 선택도는 0%에서 98.8%까지 향상되었다. 이를 직접합성법에 적용하였을 경우, 메탄올 전환율은 1.0%에서 77.8%, DMC 선택도는 41.2%에서 100.0%까지 향상되었다.

• Fibers and Polymers
• /
• 제3권4호
• /
• pp.147-152
• /
• 2002

Copper (II) salts are used as metallizing agents in the synthesis of new non-genotoxic direct dyes for cotton. Specifically, cotton fabric is dyed with non-genotoxic disazo direct dyes and then treated with copper salts. The complexes are characterized by neutron activation analysis, absorption spectrometry and standard Salmonella mammalian mutagenicity assay, and the after-treated fabrics are evaluated for lightfastness and washfastness. Direct dyes possessing ortho-propoxy and ortho'-hydroxy substituted systems formed the corresponding nonmutagenic 1:2 dye:metal complex and undergo significant improvement in lightfastness following metallization.

• Korean Chemical Engineering Research
• /
• 제56권2호
• /
• pp.291-296
• /
• 2018

구리 촉매를 이용하여 실리콘으로부터 기체상태의 methylchlorosilanes을 직접 생성하는 공정이 Rochow에 의해 제시되었고 이 후로 직접 생산 반응에 관하여 많은 연구가 진행되어 오고 있다. 직접 반응 촉매로서의 구리 외에 조촉매들을 첨가함으로서 반응의 활성을 증가시키고, 주 생산물인 DMDC 로의 선택도를 증가시키는 연구도 많이 보고되었다. 하지만 반응 기구에 있어서는 DMDC 의 생성을 설명하는 연구 외에 부산물로 함께 생성되는 여러 종류의 methylchlorosilanes 들의 생성과정을 설명하는 연구는 없는 실정이다. 그래서 본 연구에서는 실리콘 표면에 존재하는 것으로 보여지는 실리콘 활성점인 $=SlCl_2$와 $=Si(CH_3)Cl$의 존재를 제시하고 이 활성점 들에 메틸, 염소 및 수소가 첨가되어 methylchlorosilanes이 생성된다고 간주하였다. Methyl chloride ($CH_3Cl$)의 해리 흡착으로 인한 메틸-실리콘 결합의 생성과 해리 흡착한 후 표면에 존재하여 표면 이동을 하는 것으로 간주되는 Cl와 H을 이용하여 각 silanes 의 생성 경로를 제시하였다. 제시된 각 silanes 들의 생성 경로는 반응 결과 생성된 각 silanes의 종류뿐만 아니라 TPD 과정에서 생성되는 silanes 종류의 생성도 정확하게 설명해 주고 있다.

• 한국분말재료학회지
• /
• 제17권5호
• /
• pp.390-398
• /
• 2010

Aqueous gold nanoparticle dispersion was synthesized by chemical reduction method using diethanolamine as reducing agent and polyethyleneimine as dispersion stabilizer. The synthesis conditions for the stable dispersion of the gold nanoparticle suspension were determined by changing the amount of the reducing agent and dispersant during the wet chemical synthesis procedures. The face centered cubic lattice structure of the gold nanoparticles was confirmed by using X-ray diffraction and the morphologies of the nanoparticles were observed by transmission electron microscope. The synthesized gold nanoparticle dispersion was concentrated by evaporating the dispersion medium at room temperature followed by the addition of ethyleneglycol as humectant for the increase of the elastic properties to obtain gold nanoparticle inks for direct ink writing process. The line patterns were obtained with the gold nanoparticle inks during the writing procedures and the morphologies of the fine patterns were observed by scanning electron microscope.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.81-91
• /
• 2018

This paper proposes a double line voltage synthesis (DLVS) strategy for three-to-five phase direct matrix converters. In the proposed strategy, the input and expected output voltages are divided into 6 segments and 10 segments, respectively. In addition, in order to obtain the maximum voltage transfer ratio (VTR), the input line voltages and "source key" should be selected reasonably according to different combinations of input and output segments. Then, the corresponding duty ratios are calculated to determine the switch sequences in different segment combinations. The output voltages and currents are still sinusoidal and symmetrical with little lower order harmonics under unbalanced or distorted input voltages by using this strategy. In addition, the common mode voltage (CMV) can be suppressed by rearranging some of the switching states. This strategy is analyzed and studied by a simulation model established in MATLAB/Simulink and an experimental platform, which is controlled by a DSP and FPGA. Simulation and experimental results verify the feasibility and validity of the proposed DLVS strategy.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.344.1-344.1
• /
• 2016

Recently, graphene has shown great characteristic of electrical conductivity, strength, and elasticity. However, due to edge unstable and metallic properties, it is difficult to use as a semiconductor devices. The solution of such problems has been sought a way to use the boron nitride in a stacked layer structure. By graphene and boron nitride stacked layer structure on silicon substrate, the electron mobility is improved and deteriorated results in semiconductor properties. In this study, to make layered structure, we developed direct synthesis method for graphene on boron nitride. By using Raman technique, the directly stacked layer structure is in good agreement with measurements on each of the attributes.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권2호
• /
• pp.113-122
• /
• 2014

The objective of the paper is to clarify a methodology based on the use of the existing component mode synthesis methods for the case of two damped substructures which are coupled through a linking viscoelastic flexible substructure and for which the structural modes with free geometrical interface are used for each main substructure. The proposed methodology corresponds to a convenient alternative to the direct use either of the Craig-Bampton method applied to the three substructures (using the fixed geometric interface modes) or of the flexibility residual approaches initiated by MacNeal (using the free geometric interface modes). In opposite to a geometrical interface which is a topological interface on which there is a direct linkage between the degrees of freedom of substructures, we consider a physical flexible interface which exists in certain present technologies and for which the general framework linear viscoelasticity is used and yields a frequency-dependent damping and stiffness matrices of the physical flexible interface.

• 대한화학회지
• /
• 제57권5호
• /
• pp.591-598
• /
• 2013

A series of chiral prolinamide compounds with pyridine-2, 6-dicarboxylic acid moieties derived from L-proline have been designed and synthesized, their catalytic properties for direct asymmetric aldol reactions were also studied in this article. These catalysts gave the aldol product in high yield (87%) and high enantioselectivity, up to 85%, of the anti-structure at room temperature but gave disappointing results at a lower temperature or when additive was added. Conditions, including solvents, temperature and additives were screened for the reactions. Moreover, the influence of presence of water on yield and stereoselectivity was also discussed.

• 한국세라믹학회지
• /
• 제21권2호
• /
• pp.165-173
• /
• 1984

It is desirable to establish reliable synthetic methods for electro-ceramic materials. To synthesize $SrTiO_3$ in this study direct solid state reactions and wet chemical processes were used. Previous study of $SrTiO_3$ synthesis included oxalated-method($SrTiO(C_2O_4)_2$.$4H_2O$) co-precipitation$(SrCO_3+TiO(OH)_2)$ and direct solid state reaction$(SrCO_3+TiO(OH)_2)$ The methods in question lead to intermediate inclusion during the reactions and less controllable in particle sizes of $SrTiO_3$. To obtain highly pure $SrTiO_3$ so-called "direct wet process method" was added in this investigation. In the study the "direct wet process" was for the first time applied to synthesize chemically pure and fine particle $SrTiO_3$. $SrCl_2$ and $TiCl_4$<\ulcornerTEX> at KOH solution at room temperature to 10$0^{\circ}C$ precipitated $SrTiO_3$ The particle size increased as temperature increased.mperature increased.