• KIEAE Journal
• /
• v.17 no.3
• /
• pp.35-44
• /
• 2017

Purpose: This study questioned the efficiency of daylight factor as a daylight adequacy and investigated a method of how to complement its weakness by considering a direct sunlight component under a clear sky condition. Method: The Snowdon visitor centre cafe was chosen as a case study building and various techniques such as BRE formula, BRE sky protractor, Pilkington dot diagram and mock-upscale model under the artificial sky simulator were used to analyse and compare daylight factor values. An analysis of direct sunlight component under the clear sky condition was carried out by Climate Consultant 5.5, sun path diagram, and the artificial sky simulator. Result: The result of daylight factor analysis differed by the adopted techniques and it was also contradictory to the results on a direct sunlight penetration. The result not only showed the limitation of daylight factor as a metric but also suggested an improvement by combining it with direct sunlight analysis. The techniques used in this study had a merit of being applied in the early design stage and thus be beneficial to many design professions in order for early daylight performance analysis.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.1
• /
• pp.45-51
• /
• 2012

To see sunlight condition around in storage room, this study analyzers the scope both of sunlight and of the shade of sun into upper and lower window according to seasons. For this, this study investigates sun's seasonal changes, its effect of sunlight and notes antinomic conditions for ventilation and draft performance. In this, Architects of Jangkyunggak tride to block discoloration and fading due to ultraviolet rays and visible rays and block deterioration drying of the surface of Kyung-Pan due to infrared rays by oppressing sunlight flowing by means of narrowing the area of the upper window at front face that has a direct influence of Pan-Ga to avoid the exposure to direct sunlight.

• Korean Journal of Plant Resources
• /
• v.18 no.1
• /
• pp.154-160
• /
• 2005

To establish rapid micropropagation through organogenesis from apices-derived callus or direct adventitious shoot of three calla lily cultivars(Zantedeschia spp, cv. Sunlight, cv. Chiante, cv. Pink Persuation) were cultured on Murashige and Skoog medium supplemented with different plant growth regulators. The formation rate of callus, organogenesis and in viかo tuber production among the three cultivars were tested. Callus was obtained from cvs. Sunlight, Chiante and Pink Persuasion; the best cultivar was Sunlight. Sunlight induced $53.3\%$ callus and Chiante had the highest rate of $56.7\%$ direct shoot regeneration on medium with 2.0 mg/L BA. Regeneration frequencies ranged from 20 to $70\%$ on medium with 2.0-3.0 mg/L BA. The highest percentage of regeneration and the greatest number of shoots were obtained on medium containing 3.0 mg/L BA in three cultivars. Cytokinins induced multiple shoot formation; 1.0 mg/L of 2ip, 5.0 mg/L of BA, and 1.0 m/L of BA induced 16, 14 and 12 multiple shoots in cvs. Sunlight, Chiante and Pink Persuasion, respectivly. 1.0 mg/L of IAA enhanced root growth in cvs. Sunlight and Chiante while cv. Pink Persuasion exhibited enhanced root growth at 2.0 mg/L of IBA. NAA, however, induced no change in root growth. The addition of 90 g/L sucrose enhanced in vitro tuber formation and following tuber expansion in cv. Sunlight, while 70 g/L of sucrose was effective in cvs. Chiante and Pink Persuasion.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.89-91
• /
• 2008

The photovoltaic industry is growing at a tremendous speed. And it can be one of the key factors for success in the photovoltaic business to choose a suitable system, and setting it up right so as to get a maximum efficiency of the site. Therefore, it is regarded to be necessary to research the efficiency of systems to catch maximum photovoltaic energy. In this research, the expected power generation efficiencies are analysed, and compared with each other. This research considered the direct sunlight only, and the angle between the direction of solar panel and sunlight as factors to affect the power generation. Therefore, only rough analyses and estimations are found on 3 systems of fixed system, double-axes tracking system, and horizontal tracking system.

• Journal of KIBIM
• /
• v.12 no.4
• /
• pp.41-51
• /
• 2022

BIM was introduced under the leadership of public institutions, and projects such as road, railway, and site creation, including BIM tasks, are currently being ordered. In addition, as the Ministry of Land, Infrastructure and Transport(MOLIT) is pushing for the full design of BIM, public institutions under its jurisdiction are also pushing for the full design of BIM. Full design of BIM means that all designs are done with BIM. Public institutions' BIM guidelines only require BIM deliverables, and there is a limited direction for the BIM design process to respond to traditional design approaches. Therefore, it is necessary to develop a BIM-based design process corresponding to the full design of BIM.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.2
• /
• pp.309-316
• /
• 2000

KOMPSAT-2 will carry MSC(Multi-Spectral Camera) which provides 1m resolution panchromatic and 4m resolution multi-spectral images at the altitude of 685km sun-synchronous mission orbit. The mission operation of KOMSPAT-2 is to provide the earth observation using MSC with nadir pointing. KOMPSAT-2 will also have the capability of roll/pitch tilt maneuver using reaction wheel of satellite as required. In order to protect MSC from thermal distortion as well as direct sunlight, MSC shall be operated within the constraint of sun incidence angle. It is expected that the sunlight will not violate the constraint of sun incidence angle for normal mission operations without roll/pitch maneuver. However, during roll/pitch tilt operations, optical module of MSC may be damaged by the sunlight. This study analyzed sun incidence angle of payload using KOMPSAT-2 AOCS (Attitude and Orbit Control Subsystem) Design and Performance Analysis Soft ware for KOMPSAT-2 normal mission operations.

• KIEAE Journal
• /
• v.5 no.3
• /
• pp.3-9
• /
• 2005

Venetian blinds are used with windows to improve the uniformity ratio of illuminance and interior daylighting distribution under direct sunlit conditions. The main objective of Venetian blinds shading system is to obstruct direct sunlight and at the same time allow daylight to penetrate into the room. Venetian blinds would have greater effect on the interior daylighting condition under clear sky which has both skylight and sunlight than overcast sky which has only skylight. However, due to the lack of data, design and evaluation tools, it is difficult for architects to choose or install venetian blinds during the building design stages. The purpose of this study was to develop an analysis method for shading and daylighting effects of Venetian blinds using the RADIANCE program. The major variables related to the venetian blinds included blinds's slat angle and the ratio of slat width to window height, the radius slat of curvature and the building azimuth. In this study, a series of parametric physical mock-up model measurements and genblinds command in the RADIANCE simulations. The results of this study will provide building designers with the design data at early design stages.

• Journal of Photoscience
• /
• v.9 no.3
• /
• pp.49-50
• /
• 2002

N-Nitrosoproline(NPRO) is endogenously formed from proline and nitrite. NPRO has been reported to be nonmutagenic and noncarcinogenic. In this study, we have detected the direct mutagenicity of NPRO with UVA and UVB towards S. typhimurium. Formation of 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxodG), a mutagenic lesion, was observed in calf thymus DNA treated with NPRO plus simulated sunlight. Furthermore, the treatment with NPRO and sunlight induced single strand breaks in the superhelical replicative form of phage M13mp2 DNA. An analysis using scavengers suggested that both reactive oxygen species and NO radical mediate the strand breaks. The formation of nitric oxide was observed in NPRO solution irradiated with UVA. The co-mutagenic and co-toxic actions of NPRO and sunlight merit attention as possible mechanisms increasing the carcinogenic risk from UVA irradiation.

• Design & Manufacturing
• /
• v.2 no.6
• /
• pp.28-32
• /
• 2008

Polymer solar cells are a type of organic solar cell (also called plastic solar cell), or organic photovoltaic cell that produce electricity from sunlight using polymers. It is a relatively novel technology, they are being researched by universities, national laboratories and several companies around the world. In this paper, stamping mold of barrier ribs for polymer solar cells was manufactured by lithography and electroforming which can control the height of pattern and 80nl of barrier ribs was manufactured by using hot embossing.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.4
• /
• pp.27-40
• /
• 2013

These day morden cities have serious climatic problems due to enviornmental load caused by excessive development of urbanization. As technological improvement to answer to various ecological disasters and climate changes are also called on the field of construction, inter-disciplinary studies linked to the estabilishment of sustainable energy generation systems and enviornmental control is needed in a consilient point of view. This study aims to analyse optimal site conditions for photovoltaic system and green roof planting through solar radiation simulation in a integrated perspective. In so doing, it seeks to proffer basic study for developing a sound use of roof area that is sustainable in environmental and resources aspects. A computer simulation showed that, in the case of total seasonal solar radiation, summer season resulted 312.5kWh in 35% of total annual solar radiation. This season indicated the lowest radiation rate of the year for direct sunlight in 45.8% of total seasonal solar radiation. Due to such solar radiation simulation, at the largest optimal planting area, Glechoma hederacea var. longituba secured $719.16m^2$ of gross roof area.