• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.709-718
• /
• 2019

The international nuclear industry has undergone a lot of changes since the Fukushima, Chernobyl and TMI nuclear power plant accidents. However, there are still large and small component deficiencies at nuclear power plants in the world. There are many causes of electrical equipment defects. There are also factors that cause component failures due to human errors. This paper analyzed the root causes of failure and types of human error in 300 cases of electrical component failures. We analyzed the operating experience of electrical components by methods of root causes in K-HPES (Korean-version of Human Performance Enhancement System) and by methods of human error types in HuRAM+ (Human error-Related event root cause Analysis Method Plus). As a result of analysis, the most electrical component failures appeared as circuit breakers and emergency generators. The major causes of failure showed deterioration and contact failure of electrical components by human error of operations management. The causes of direct failure were due to aged components. Types of human error affecting the causes of electrical equipment failure are as follows. The human error type group I showed that errors of commission (EOC) were 97%, the human error type group II showed that slip/lapse errors were 74%, and the human error type group III showed that latent errors were 95%. This paper is meaningful in that we have approached the causes of electrical equipment failures from a comprehensive human error perspective and found a countermeasure against the root cause. This study will help human performance enhancement in nuclear power plants. However, this paper has done a lot of research on improving human performance in the maintenance field rather than in the design and construction stages. In the future, continuous research on types of human error and prevention measures in the design and construction sector will be required.

• 한국지반공학회논문집
• /
• 제39권5호
• /
• pp.27-40
• /
• 2023

말뚝은 상부 구조물의 하중을 지지층으로 전달하는 구조체로 국내외 건설 현장에서 널리 사용되고 있다. 말뚝을 시공하는 방법은 지반조건, 시공위치, 주변현황, 환경적 요소, 공사비 등을 종합적으로 고려하여 결정하며 크게 직항타에 의한 타입방식과 선굴착 후 경타 또는 항타하는 방식으로 나눌 수 있다. 이 중 직항타는 말뚝 두부를 해머로 항타하여 원지반 내 소정의 심도까지 근입시키므로 항타 시 가해지는 에너지가 크고 이에 따른 항타진동 및 소음도 증가한다. 말뚝의 항타진동은 주변 시설물 및 지반에 영향을 미치므로 그 영향을 정량적으로 파악할 필요가 있다. 본 연구에서는 말뚝의 항타진동을 시간영역에서 산정하고, 직항타 시 말뚝과 인접하여 위치한 굴착면 및 가시설에 대하여 항타진동에 의한 영향을 유한차분해석법에 의한 2차원 동적수치해석을 통하여 분석하였다. 그 결과 파의 반사 및 재료감쇠가 적은 지표면에서 표면파에 의하여 지중보다 변위가 현저히 크게 발생하는 경향을 나타내었고 전체 변위 크기는 이격거리 증가에 따라 감소하나 수평방향 변위는 진동원과 먼 사면 상단부에서 연직방향 대비 더 큰 값을 보이며 법면부에 변위가 집중적으로 발생하는 특징을 확인하였다.

• 한국의류학회지
• /
• 제17권2호
• /
• pp.281-289
• /
• 1993

Concept of the comfort and fitness becomes a major concern in the basic function of the ready-made clothes. Accordingly a more sophiscated classification of the human morphological characteristics is strongly required for the effective clothing construction. This research was performed to classify and characterize Korean adult males anthropometrically. Sample size was 1290 subjects and their age range was from 19 to 54 years old. Sampling was carried out by the stratified sampling method. Data were collected by the direct anthropometric measurement. 75 variables in total were applied to classify the bodytypes. Data were analyzed by the multivariate method, especially factor and cluster analysis. The high factor loading items extracted by factor analysis were based to determine the variables of the cluster analysis for the similar bodytypes respectively. In the part of the trunk, 19 variables from the data were applied to classify the bodytypes of trunk by Ward's minimum variance method. The groups forming a cluster were subdivided into 5 sets by cross-tabulation extracted by the hierarchical culster analysis. Type 3 and 4 in trunk were composed of the majority of 55.6% of the subjects. The Korean adult males had relatively well-balanced bodytypes in trunk.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.47-50
• /
• 1991

LPM(Linear Pulse Motor) provide direct and precise position control of bidirectional linear motion. LPM is not subject to the same linear velocity and acceleration limitations inherent in systems converting rotary to linear motion such as lead screws, rack and pinion, belt and pulley drives. With LPM, all the thrust force generated by the motor is efficiently applied directly to the load. And speed, distance, and acceleration are easily programmed in a highly repeatable fashion. Potential industrial and application fields of LPM include PCB assembly, industrial sewing machines, automatic inspection, coil winder, medical uses, conveyer system, laser cut and trim systems, semiconductor wafer processing, OA instruments etc. This paper describes various design parameter of LPM such as magnetic ciucuit construction methods, phase number and tooth number per pole, permanent magnet and coil mmf, tooth geometries. And to solve the problems of existing control methods, in this paper, a new control method of the LPM is proposed throughout modern control theory.

• 한국안전학회지
• /
• 제21권3호
• /
• pp.67-72
• /
• 2006

This study is to investigate the related materials such as domestic law regulation, research paper, research report, and the other material, and to suggest suitable counter measures, to find out hazard degree for its works of workers and work place through direct survey, in order to determine risk score of each hazardous work which is designated by the Government, without consideration of labour's consciousness against risk level at a site. Therefore, a new questionnaire survey related to the decision of risk level are made and distributed to find out what risk level each worker recognizes. Also, the authors tried to approach reasonable conclusions after discussing reasonability of qualification standard and improving ideas of worker at hazardous work places with worker, faculty member, H&S manager, labour union. And the results show hazard degrees by each work kind of the above: 3.75 for working with machinery, 3.7 for steel structure, 3.5 for operation of tower crane, 3.51 for retaining wall, 3.85 for form work, 3.46 for scaffolding are obtained. This quantified risk can be applied to establishing a reasonable system to keep safe against hazardous works.

• 한국측량학회지
• /
• 제33권6호
• /
• pp.527-536
• /
• 2015

Recently, the demand for three-dimensional spatial information has continuously been increasing, and especially, studies of indoor/outdoor spatial information or data construction have actively been conducted. However, utilization of spatial information does not universally spread to the private sector, but it is mostly used for the government offices. Thus, this study deals with the creation of three-dimensional right objects and the technique of expression to further vitalize the private sector, three-dimensional right objects, aiming to create and express three-dimensional right spaces in a particular system or open platform more conveniently. Unlike a plane text or apartment building used in existing maps was iconified and displayed simply, this study proposes a method of extracting data from the outer border of the building by the relevant level based on the existing structured three-dimensional building, a method of providing two-dimensional right spatial objects in XML, and expressing them as three-dimensional right objects efficiently. In addition, this study will discuss a method of creating right objects in a way in which an owner who was provided with a cross section of a building involves the direct detailed right objects in additional production or reproduction to utilize three-dimensional data (right objects) produced through this study.

• 한국주거학회논문집
• /
• 제26권5호
• /
• pp.97-104
• /
• 2015

This paper aims to discuss the concept of resilience in floating housing, to investigate the resilient features of floating houses & to review the possibility of floating housing as a new form of resilient living, and to suggest some reference ideas for the planning and design of floating housing projects. Resilient features of the floating house can be summarized as the buoyant characteristics for natural disasters, the easy employment & potential use of renewable and nearly self-sufficient energy systems in locations subject to limited energy sources, the movability, mobility, long life, water recycle system, prefabrication and modular construction with the potential for reduced environmental impact. Additional benefits include the potential for a peaceful and comfortable atmosphere due to direct connections with nature, good relationship with neighbors, a solid social spirit of unity, and sense of security. Considering the resilient features of floating house at a time of serious climate change requires a new paradigm, and floating/amphibious/floatable housing has great possibility as a new form of resilient living.

• 대한공간정보학회지
• /
• 제21권1호
• /
• pp.87-93
• /
• 2013

3차원 시뮬레이션을 이용하여 조망, 일조, 일영, 직광 등 3차원 공간분석에 대한 분야가 발전함에 따라 3차원 시뮬레이션에 필요한 3차원 지형모델 제작에 관한 연구가 필요하게 되었다. 본 연구에서는 법선의 방정식을 이용하여 2차원 설계도면을 3차원 지형모델로 변환함으로써 개발후의 3차원 지형모델을 생성하는 방안을 제시하였다. 2차원 설계로부터 3차원 지형모델 생성을 위한 자동화 알고리즘을 개발하였으며, 향후 세부적인 연구가 필요할 것으로 예상된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.782-791
• /
• 2009

This study was carried out the laboratory tests and field plate load test in order to evaluate the reinforcement effect of geocell for road construction. The geocell-reinforced subgrade shows the increment of cohesion and friction angle with comprison of non-reinforced subgrade. In addition, the field plate load test was performed on the geocell-reinforced subgrade to estimate the bearing capacity of soil. The direct shear test was conducted with utilizing a large-scale shear box to evaluate the internal soil friction angle with geocell reinforcement. The number of cells in the geocell system is varied to investigate the effect of soil reinforcement. The theoretical bearing capacity of subgrade soil with and without geocell reinforcement was estimated by using the soil internal friction angle. The field plate load tests were also conducted to estimate the bearing capacity with geocell reinforcement. It is found out that the bearing capacity of geocell-reinforced subgrade gives 2 times higher value than that of unreinforced subgrade soil. In the future, the reinforcement effect of the geocell rigidity and load-balancing effect of the geocells should be evaluated.

• 한국조경학회지
• /
• 제26권4호
• /
• pp.95-104
• /
• 1999

The Landscape Drawing is the main medium for constructing better environment which provides human beings with a place for dwelling well, even though it has some limitations. To provide places for people's daily lives, by what measure do we design\ulcorner, by what measure do we give dimension\ulcorner, and how can we appropriately measure the place with drawing\ulcorner On any given site, of course, much has already happened, i.e, there is history. Any adequate interpretation of such a site should poetically take into account the present effects of its absent past. The findings to reveal the meaning and methodology of landscape drawings in the environmental design with a case study are as follows: (1) The value of landscape drawings is the poetic, artistic interpretation which we sense and bodily experience through the simultaneous exposure of the site's temporal, spatial, and tactile conditions. (2) The landscape drawing should represent the invisible (imaginary) world as well as the visible (physical) world. (3) There can be classified as two methods in representing the rich experience of a place: expression and notation. Expression is the abstract representation and do not have a direct relationship to construction due to its ambiguous and connotative structure. But notation is constructional due to it's purely objective symbol system which is obviously denotative structure. (4) Collage is a medium of specific act that can represent the complex layered phenomena and the rich experience of given site. (5) The landscape drawings represent not only topographical space which can be measured objectively, but also topic which can be cognized culturally.