• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.46-53
• /
• 2004

Heat release analysis is a very important method for understanding the combustion phenomena inside an engine cylinder. In this study, one-zone heat release analysis was used with the measured cylinder pressures of a HSDI(high speed direct injection) and IDI(indirect injection) diesel engines, Those have benefits of simple equation, fast speed, reliability. The objective of the study is to compare the combustion characteristics between a HSDI and an IDI. The result shoes that the maximum heat release rate of a HSDI is higher than that of an IDI because of long ignition delay period. The heat release curve of an IDI is more linear than that of a HSDI, thus is similiar to that of a SI engine. The combustion efficiency of a HSDI is higher than that of an IDI because of the smaller heat transfer loss of a HSDI. There is a suggestion here that an IDI engine has broad heat transfer area which include two combustion chambers, the connection passage of combustion chambers, etc.

• International Journal of Human Ecology
• /
• v.17 no.1
• /
• pp.15-25
• /
• 2016

A number of studies in recent years of have begun to look at the connection between country affinity (an interest in and admiration of a particular country) and a desire to buy the products and services of that country. Country affinity has been shown to be particularly important when consumers lack other sources of information about a good or service. However, except for direct questioning, methods to identify the affinity consumers might have for another country are lacking. This study examines the degree to which attending a movie set in a particular country will be related to an affinity for that country and possibly by extension the goods and services of that country. It is not the goal of this study to suggest that movies create the affinity, but rather that that the affinity will exist for viewers of the films. Two films set in Ireland and featuring Irish actors where shown to audiences composed of Korean students and a small number of Korean adults. As a point of comparison, students in two introductory consumer classes were also asked to complete a similar questionnaire. Four affinity factors were identified from a list of 17 items. Those who attended the historical drama showed a greater affinity for Ireland than those who attended the romantic musical. Affinity for Ireland among Koreans was also meaningful in predicting interest in purchasing Irish products.

• Korean Institute of Interior Design Journal
• /
• v.17 no.2
• /
• pp.150-161
• /
• 2008

It requires more close cooperation process and mediator for smooth communication in this industry structure where design and engineers are separated. The database of design integrates separate system and helps connection between organizations. The application category is utilized variously from formation to operation. Architectures addressed in this content as Frank Gehry and Nox are making differentiated design on the base of 3d digital methodology and using it widely from generation to fabrication. Especially they got to be free from the generative limit as it became available to analyse, digital surface organization, and realize the complex system form. Now more integrated and delicate works got to be affordable owing to various kinds of improved CNC, RP(rapid-prototype) machines, and architecture hardwares. With a linkage of software now at their disposal, architects can create a digital model of a building and all of its design elements, and in turn use this 3d information to construct actual building components using machines driven by CNC and other advanced manufacturing techniques. Digital technologies are enabling a direct correlation between what design and construction, thus bringing to the forefront the issue of the significance of information, the production, communication, application, and control of digital information in the industrial system. The central requirement is the clear, reliable, and consistent exchange of information among all parties involved in creating a given project.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1996.04a
• /
• pp.70-77
• /
• 1996

Recently many efforts have been made to improve the efficiency of design and production of the structures using the automation system. But, this work has been progressed as independent or partial system. And, the study on the integrated system is not sufficient in application for practical problems yet. This paper deals with the fundamental concept of modeling system and application method on structural modeling. At first, the core of the integrated system is a shape modeling system that can represent the geometric and topological information. This system must be designed as an open system to be combined with each independent automation system. The appropriate concept to realize this system on structural modeling is object oriented modeling and this enables to integrate each automation system successfully, This concept was applied to automatic mesh generation. For shape modeling system, half-edge data structure that is being used in solid modeling was modified to handle the plate structure in the plane. And, to generate the triangular meshes, direct node connection method was used. And, as a result, the integrated system that generate the meshes of two dimensional structure automatically was realized. And, programmed by C++, these systems can be combined with other systems easily and have good reusability.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.67-70
• /
• 2004

An investigation was performed to study the impact damage of the laminated composite plates caused by a low- velocity foreign object with multi-scale modeling based on the concepts of Direct Numerical Simulation (DNS)[4]. In the micro-scale part, we discretize the composite plates through separate modeling of fiber and matrix for the local microscopic analysis. A micro-scalemodel was developed for predicting the initiation of the damage and the extent of the final damage as a function of material properties, laminate configuration and the impactor's mass, etc. Anda macro-scale model was developed for description of global dynamic behavior. The connection betweenmicroscopic and macroscopic is implemented by the tied interface constraints of LS-DYNA contact card. A transient dynamic finite element analysis was adopted for calculating the contact force history and the stresses and strains inside the composites during impact resulting from a point-nose impactor. The low-velocity impact events such as contact force, deformation, etc. are simulated in the macroscopic sense and the impact damages, fiber-breakage, matrix cracking and delamination etc. are examined in the microscopic sense.

• Computers and Concrete
• /
• v.4 no.5
• /
• pp.347-362
• /
• 2007

Due to heterogeneities at all scales, concrete exhibits significant variability in mechanical behavior from sample to sample. An understanding of the fundamental mechanical performance of concrete must therefore be embedded in a stochastic framework. The current work attempts to address the connection between a two-dimensional concrete mesostructure and the random local material properties associated within that mesostructure. This work builds on previous work that has focused on the random configuration of concrete mesostructures. This was accomplished by developing an understanding of the effects of variations in the mortar strength and the mortar-aggregate interfacial strength in given deterministic mesostructural configurations. The results are assessed through direct tension tests that are validated by comparing experimental results of two different, pre-arranged mesostructures, with the intent of isolating the effect of local variations in strength. Agreement is shown both in mechanical property values as well as the qualitative nature of crack initiation and propagation.

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.1
• /
• pp.79-94
• /
• 2012

This study is attempted to explore direction for the schooling related 5-school-day week. For this end, first, the social background and educational meaning for the 5-school-day week were reviewed. It was found that there is a close connection between 5-school-day week and 5-work-day week. And learning by direct and actual experience is emphasized. Second, The present condition of the schooling were analysed. It was examined the guidelines for curriculum organization and time allotment proposed the 2009 revised national curriculum. Also, It was checked the educational background and qualifications, for example ratio of students to teaching staff, office of education, local government etc. Third, the direction for the schooling for 5-school-day week were discussed. The object of research related to the 5-school-day week was the applicabilities and limits of 2009 revised national curriculum. Also, It is necessary to establish a system of education office in local to work with the local government.

• International Commerce and Information Review
• /
• v.8 no.1
• /
• pp.125-141
• /
• 2006

It is no unnecessary to tell the importance of foreign trade in Korea economics. Nevertheless, government's direct support is impossible owing to WTO's regulation. Accordingly, government have brought focus into trade facilitation as paperless trade. e-Trade document repositary building by government's budget and private sector's cooperation is a part of e-Trade platform and necessary function in connection with relay and certification of e-Trade document. This study examined the estimated operational problems of e-Trade document repositary as compared Licensed Electronic Document Repositary. Firstly, the operator of e-Trade document repositary undertake multiple role and function as Licensed Certification Authorities(e-sign Act), Licensed Electronic Document Repositary(Framework Act on Electronic Transaction) etc. Secondly, sufficient levy that meet operating cost of the e-trade document is the key point of e-Trade document repositary's success, because additional budget invest in that operation is too hard to do. Thirdly, the operator of the e-Trade document repositary have to keep fairness, objectivity and transparency because the operational right is exclusive.

• Steel and Composite Structures
• /
• v.18 no.3
• /
• pp.565-582
• /
• 2015

This paper is concerned with the dynamic analysis of simply-supported steel-concrete composite beams under moving loads. Considering the interface slip between steel girder and concrete slab, the governing motion equations are derived from the direct balanced method. By variable separation approach, the analytical solution of natural frequencies and mode shapes are obtained, as well as the orthogonal conditions. Then the dynamic responses of the composite beam under moving loads are analyzed, and compared with the experimental results. The analysis results show that the governing motion equations become more complicated when interface slip is taken into account, and the dynamic behaviors are significantly influenced by the shear connection stiffness. In the dynamic calculation of composite beams, the global stiffness should not be reduced as the same factor to all orders, but as different ones according to the dynamic stiffness reduction factor (DSRF), to which should be paid more attention in calculation, design and experiment, or else great deviation is inevitable.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.5
• /
• pp.629-635
• /
• 2014

This paper describes propagation characteristics obtained by considering semiconducting screen and cross-bonding in underground transmission cables. The semiconducting screen of power cable has effect on propagation characteristics including attenuation, velocity and surge impedance. However, it is very difficult to apply the semiconduction screen for EMTP model because of the number of conductors limitation. Therefore, CIGRE WG 21-05 proposed advanced insulation structure and analysis technique of simplified approach including inner and outer semiconducting screen. In this paper, the various propagation characteristics analyse using this structure and technique for 154kV XLPE $2000mm^2$ cable. The frequency independent model of EMTP CABLE PARAMETER is used for just pattern analysis of propagation characteristics. For exact data analysis, the frequency dependent model of J-marti is used for EMTP modeling. From these result, various propagation characteristics of 154kV XLPE $2000mm^2$ cable according to semi conducting screen consideration, frequency range, cable length and pulse width are analysed. In addition, in this paper, the effects of cross-bonding are also variously discussed according to cross-bonding methods, direct connection and impedance of lead cable.