• 제목/요약/키워드: Dipole Source

검색결과 152건 처리시간 0.026초

Near Fields around Metallic Walls due to a Nearby Dipole Source with Applications to EMC

  • Kim, Ki-Chai;Lim, Sung Min;Kim, Jong-Woo
    • Journal of Electrical Engineering and Technology
    • /
    • 제12권1호
    • /
    • pp.329-334
    • /
    • 2017
  • This paper discusses the near field characteristics of a dipole source located near conducting metallic walls from an electromagnetic compatibility (EMC) point of view. An integral equation for a dipole source near a metallic wall is derived and solved by applying Galerkin's method of moments (MoM). The results show that in the regions outside the dipole source, total electric near fields decrease gradually in magnitude with an increasing field point from the dipole source. But in the regions inside the dipole source, total electric near fields decrease rapidly with a dipole position of $h{\leq}0.3{\lambda}$. For a dipole position of $h{\geq}0.7{\lambda}$, the peaks and nulls of the total near electric field occur periodically in the regions inside the dipole source, and the fluctuation period is almost $0.5{\lambda}$. The worst position for a receptor location is along the z-axis, and a range of a half-magnitude of the maximum near electric field in the principal H-plane is about two times broader than that of the principal E-plane. Experimental measurements are also presented to validate the theory.

뇌전위의 단일 쌍극자 모델에서 전극의 개수, 쌍극자의 위치 및 방향이 S/N과 쌍극자 추정 오차사이의 관계에 미치는 영향에 관한 시뮬레이션 연구 (The Influence of the Number of Electrodes, the Position and Direction of a Single Dipole on the Relation Between S/N ratio and EEG Dipole Source Estimation Errors)

  • 김동우;배병훈
    • 대한의용생체공학회:의공학회지
    • /
    • 제15권1호
    • /
    • pp.71-76
    • /
    • 1994
  • 단일 쌍극자 모델을 이용한 source localization 문제에서 전극의 갯수, 쌍극자의 위치 및 방향 등이 S/N(signal to noise ratio)과 추정 오차사이의 관계에 미치는 영향을 Monte Carlo 시뮬레이션으로 조사했다. forward problem은 3중 구각 모델로 계산했고, simplex 방법으로 쌍극자 파라미터를 최적화시켰다. 전극의 갯수가 많을때, 쌍극자가 뇌 중심(midbrain)보다 대뇌 피질(cortex)부근에 있을 때, 쌍극자가 tangential 방향일 때 추정 오차의 평균과 표준편차가 작아졌다.

  • PDF

전기장 또는 자기장 송신원을 이용한 벡터 CSMT (Controlled Source Magnetotellurics with Vector Measurement Using Electric and Magnetic Sources)

  • 이희순;송윤호
    • 자원환경지질
    • /
    • 제30권5호
    • /
    • pp.451-458
    • /
    • 1997
  • The horizontal magnetic dipole as well as electrical dipole was adopted as a source to compute one-dimensional electromagnetic field behavior in controlled source magnetotellurics. he Cagniard impedances due to horizontal magnetic dipole source, especially phases, showed better frequency characteristics than those due to electric one. The magnetic dipole is inferior to the electric dipole in the point of relatively weak transmitting power at low frequency. But considering high resistivity charateristics of Korean geology, the magnetic dipole source is recommended for the survey up to depth of 500 m. A vector CSMT was introduced to get more reliable data in the area of two- or three-dimensional structures. A software and interpretation technique using polarization ellipses were developed. The technique was tested by synthetic data, which provided theoretical basis of the methodology. Although CSMT has inevitable limitation of investigation depth due to practically possible source-receiver separation, we proposed to use the technique developed in this paper where MT is not available, for example, in extremely noisy area or for shallow target.

  • PDF

모델 변수가 EEG의 Single Dipole Source 추정에 끼치는 영향에 관한 연구 (The effect of model parameters on single dipole source tracing in EEG)

  • 박기범;박인호;김동우;배병훈;김수용;박찬영;김신태
    • 한국의학물리학회지:의학물리
    • /
    • 제5권1호
    • /
    • pp.41-53
    • /
    • 1994
  • 단일 쌍극자 모델을 source localization 문제에 적용시키는 것은 초보적이기도 하지만 필수적이기도 하다. 시abf레이션을 이용하여 단일 쌍극자를 추적함으로써 얻은 결과는 실제 인간의 뇌에 관한 EEG 임상 실험에 여러가지 정보를 제공해줄 수 있기 때문이다. 이번 논문에서는 EEG실험에서의 전극 배치가 S/N(signal to noise ratio)과 추정 오차 사이에 어떤 영향을 미치는 가를 Monte Carlo 시뮬레이션으로 조사하였다. 머리모델은 3중 구각 모델을 사용하였고 이를 이용하여 forward problem을 계산하였다. 쌍극자 파라미터를 minimization하는 문제는 simplex method를 이용하여 계산하였다. 컴퓨터 시뮬레이션 결과, 특이한 점은 전극의 밀도와 입체각에 의해 쌍극자 파라미터 오차가 변화했다는 사실이다. 이것은 곧바로 전극 배치와 연관이 된다. 실제 EEG 실험에서 전극배치를 어떻게 했는가에 따라 그에 따른 오차가 변화한다.

  • PDF

Fourier Modal Method for Optical Dipole Radiation in Photonic Structures

  • Park, Sungjae;Hahn, Joonku;Kim, Hwi
    • Current Optics and Photonics
    • /
    • 제5권6호
    • /
    • pp.597-605
    • /
    • 2021
  • An extended Fourier modal method (FMM) for optical dipole radiation in three-dimensional photonic structures is proposed. The core elements of the proposed FMM are the stable bidirectional scattering-matrix algorithm for modeling internal optical emission, and a novel optical-dipole-source model that prevents numerical errors induced by the Gibbs phenomenon. Through the proposed scheme, the FMM is extended to model a wide range of source-embedded photonic structures.

근거리 음원 탐지를 위한 MUSIC용 음원 모델 (Acoustic Source Models for MUSIC to Identifying Near Field Source)

  • 최재웅;김양한
    • 한국음향학회지
    • /
    • 제19권2호
    • /
    • pp.54-60
    • /
    • 2000
  • 어레이를 이용한 음원 탐지는 음원의 모델을 가정하고 있다. 원거리 음원의 경우에는 평면파 모델을 적용하여 널리 적용되고 있으나, 근거리 음원의 경우에는 단극 음원을 가정한 음원 탐지법이 시도되고 있는 상황이다. 이 논문에서는 보다 효과적인 근거리 음원 추정을 위해 쌍극 음원 모델과, 삼극 음원 모델을 유도하여 MUSIC 방법에 적용할 수 있는 주사벡터(scan vector)를 제안하였다. 제안된 삼극 음원 모델의 경우, 실제 음원이 순수 쌍극 음원인 경우에 음원 탐지 성능이 다소 떨어지나, 단극 및 사극 음원이거나, 이들의 조합에 의한 음원이거나에 관계 없이 적용 가능함을 알 수 있었다. 따라서 일반적인 음원 탐지에 활용할 수 있는 효과적인 음원 모델임을 알 수 있었다.

  • PDF

DLR 축류홴 주위의 난류유동 및 공력소음의 계산 (Computation of Turbulent Flows and Aero-Acoustics from DLR Axial Fan)

  • 배일성;장성욱;이승배
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2001년도 춘계학술대회논문집
    • /
    • pp.762-767
    • /
    • 2001
  • LES formulation was applied to simulate the flow fields around rotating fan blades tested by DLR. The turbulent flows around fan blade rotating with 500 RPM were simulated and the far-field noise was exactly computed by using the Focus Williams and Hawkings equation with an inclusion of quadrapole source formulation. The dipole noise computed at the far-field by predicted drag and lift forces at steady state was in good agreement with experimental data and the dipole source was also found to be the major factor than other sound sources from unsteady calculation.

  • PDF

42″ AC-PDP의 방사특성에 대한 연구 (Investigation on Radiation Characteristics of 42″ AC-PDP)

  • 임헌용;김민석;박동욱;이정해
    • 한국전자파학회논문지
    • /
    • 제15권9호
    • /
    • pp.841-847
    • /
    • 2004
  • EMI emission characteristics of 42" AC-PDP panel are investigated in this paper. First, EMI emission source was modeled the scan electrode and the sustain electrode to a simple electric and magnetic dipole type radiator. Second, EMI emission source was modeled as reconfigured the scan electrode and the sustain electrode. The primary source of EMI emission was investigated using FEM calculation of the wave impedance and 3 dB beam width. The third. the EMI emission level was estimated using the measured sustain electrode current. Also, EMI emission level of 42" AC-PDP was measured. The results show that the calculated EMI emission level from the simple electric dipole model was shown to agree with that from the corresponding FEM simulation.

음파검층에서의 속도결정 - monopole및 dipole소스의 비교 - (Sonic Velocity Determination using Data from Monopole and Dipole Sources)

  • 공남영;이성진;;김영화
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2006년도 공동학술대회 논문집
    • /
    • pp.225-231
    • /
    • 2006
  • 음파검층을 사용하여 획득한 파형으로부터 정확한 속도분석을 하기 위한 연구의 일환으로 일반적으로 많이 이용되고 있는 STC 방법(Slowness-Time Coherence)을 비롯하여, 파의 분산성을 고려한 Tang et al.의 방법(1995)을 검층시험용 모형공에 적용해 보고 그 결과를 비교하였다. P파와 Stoneley파 에서는 매우 일관된 속도값을 보여 STC방법의 효과가 확인되었다. Tang et al.의 방법(1995)에서 구해진 S파 속도는 monopole source의 S파속도와 잘 일치되고 dipole source의 자료에 대한 monopole technique의 STC방법에서의 S파속도 범위 내에 있는 것이 확인되었다.

  • PDF

천흘수 초대형 부유식 해양규조물의 유탄성 응답해석 (Analysis of Hydroelastic Responses for Very Large Floating Structures with a Shallow Draft)

  • 신현경
    • 한국해양공학회지
    • /
    • 제14권2호
    • /
    • pp.53-59
    • /
    • 2000
  • A numerical method to predict responses of very large floating structures in wave is suggested using source-dipole distribution method. The deflection of the plate is calculated by the finite element method in terms of rigidity matrix of each node. The calculated results for a plate are compared with the experimental ones.

  • PDF