• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.79-86
• /
• 1997

The need for an active exhaust moise controller has been growing as an reinforcement of exhaust noise regulation, high power output and improvement of average fuel economy. In this study, for development of this active exhaust noise controller, the implementation of a composition of realtime control algorithm for active exhaust noise control and the construction of simulator for realtime control algorithm for active exhaust noise control has been investigated. Also, in order to implement active exhaust noise control with this simulator, the feasibility model for control of vehicle exhaust noise control is suggested.

• Journal of Information Display
• /
• 제5권1호
• /
• pp.34-40
• /
• 2004

Time resolved infrared IR absorption spectroscopy is carried out to investigate the dynamics of electric field induced reorientation of the biphenyl molecular core and alkyl tail sub-fragments of the nematic liquid crystal 5CB (4-pentyl-4-cyano-biphenyl). The planar to homeotropic transition for high pre-tilt planar aligned cells, is studied for switching times ranging from 200 ${\mu}sec$ down to 80 ${\mu}sec$, the latter a factor of 1000 times faster than any previous nematic IR study. The reorientation rates of the core and tail are found to be the same to within experimental error and scale inversely with applied field squared, as expected for the balance of field and viscous torques. Thus any molecular conformation change during switching must relax on a shorter time scale. A simple model shows that no substantial differences exist between the reorientational dynamics of the tails and cores on the time scales longer than on the order of 10 ${\mu}s$.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.567-571
• /
• 2004

The 2-dimensional unsteady flows on and around the cambered airfoils were computed by applying LES with the deductive dynamic SGS model. The unsteady flow field were used as inputs to compute the far-field sounds and directivity patterns from rotating blades by a hybrid approach that exploits Farassat's formula. The BEM (Boundary Element Method) was applied to predict the frequency characteristics from the rotating blades for the cases of even- and uneven-pitched fans. The BEM results suggested that the unevenly pitched fan have less pronounced discrete peaks at BEF frequencies, which was confirmed by the experiment.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1269-1276
• /
• 2001

In case of contact fatigue, the accurate calculation of surface tractions and subsurface stress is essential to the predication of crack initiation life. Surface tractions influencing shear stress amplitude have been obtained by contact analysis based on influence function. Subsurface stress has been obtained by using rectangular patch solutions. In this study, to simulate asperity contact under sliding condition, the tip of asperity was simulated by sphere and to calculate crack initiation life in the substrate, dislocation pileup theory was used.

• 통합자연과학논문집
• /
• 제2권2호
• /
• pp.59-64
• /
• 2009

금속 나노 입자의 표면편재 플라즈몬 공명 주파수에 영향을 미치는 금속의 유전율은 조사된 빛의 파장 값에 의존하는 함수로 표현된다. 본 연구에서는 유전율의 실수부와 허수부 값을 체계적으로 변화시킬 수 있는 가상의 금속 나노 막대를 대상으로, 이산 쌍극자 근사(Discrete dipole approximation)를 사용하여, 광학적 성질을 계산하였다. 계산 결과, 유전율 함수의 실수부가 선형적으로 감소하는 경우에는 금속의 크기가 커짐에 따라 최대 소광이 나타나는 피크가 긴 파장영역으로 이동했고, 반대로 실수부가 선형적으로 증가하는 경우에는 최대 소광이 나타나는 피크가 짧은 파장영역으로 이동함을 알 수 있었다. 허수부 값을 증가시켰을 경우에는, 실수부에 관계없이 그 값이 증가함에 따라 피크의 세기가 감쇠하는 경향을 보였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.183-184
• /
• 2006

The simulation on the mechanism of terahertz NSOM(near-field scanning optical microscopy) have been investigated. Based on experimental results, we have demonstrated the antenna effects on the coupling between a metal tip and substrate for an emission-type terahertz NSOM. It has been found that the lateral resolution can be estimated by a simplified model using an infinitesimal dipole in the substrate.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권1호
• /
• pp.23-28
• /
• 2014

In this paper, we discuss on the optimal design scheme of the bilayer OLED (Organic Light Emitting Diodes) with micro-cavity structure. We carried out the optical simulation on the OLED device and calculated optimal scale of devices with taking the micro-cavity effect into account. Our emission model is based upon an ensemble of radiating dipole antennas. Consequently, we applied Maxwell's equation to this sequence, followed by the analysis on the electrical behaviors of OLED device using Poisson's equation. It contains carrier injection and transportation mechanism. In this process, we found out the thickness of each layer can affect the recombination rate at the emission layer. Therefore, we optimized the thickness of each layer to improve the efficiency of the device.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 춘계학술대회 논문집
• /
• pp.125-129
• /
• 1992

When relaxation time will be distributed, TSC observed in the experimental procedure was analysed by using a potential model having two equilibrium positions and equations of dielectric properties was derived. Calculation of distribution was made by matrix method and compared/confirmed values obtained by TSC and alternating current which have a correspondence with each other. In this measurement, distribution of activation energy and relaxation time was determined by TSC peak at around 147k/364 of which center is 10$\^$-4/ sec/10$\^$5/ sec respectively at room temperature and also obtained dielctric loss factor at the range of 10$\^$-7/-10$\^$5/Hz. It seems that low temperature peak is local dispersion and high temperature peak have a relation to dielectric transition of the material.

• Bulletin of the Korean Chemical Society
• /
• 제20권11호
• /
• pp.1329-1334
• /
• 1999

The curing characteristics of diglycidyl ether of bisphenol A (DGEBA) with diaminodiphenylmethane (DDM) as a curing agent were studied using differential scanning calorimetry (DSC), rheometrics mechanical spectrometry (RMS), and dielectric analysis (DEA). The isothermal curing kinetics measured by DSC were well represented with the generalized auto-catalytic reaction model. With the temperature sweep, the inverse relationship between complex viscosity measured by RMS and ionic conductivity obtained from DEA was established indicating that the mobility of free ions represented by the ionic conductivity in DEA measurement and the chain segment motion as revealed by the complex viscosity measured from RMS are equivalent. From isothermal curing measurements at several different temperatures, the ionic conductivity contribution was shown to be dominant in the dielectric loss factor at the early stage of cure. The contribution of the dipole relaxation in dielectric loss factor became larger as the curing further proceeded. The critical degrees of cure, at which the dipolar contribution in the dielectric loss factor starts to appear, increases as isothermal curing temperature is increased. The dielectric relaxation time at the same degree of cure was shorter for a sample cured at higher curing temperature.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.575-578
• /
• 1995

X-ray magnetic-circular-dichroism (MCD) spectra, orbital ($$) and spin magnetic moments ($$) for Co(110) monolayers a free standing mode or sandwiched between Pd(Pd/1Co/Pd)and Cu layers (Cu/1Co/Cu) are calculated using the thin film full potential linearized augmented plane wave energy band method. In contrast to the double peak structure predicted for the Co(0001) surface, only a minor side peak is found in the MCD spectra for Cu/Co/Cu, while MCD spectra for the other systems show a single peak structure. The MCD sum rules originally derived from a single ion model are found in the band approach to be valid for the systems investigated. However, for the spin sum rule, the magnetic dipole term ($$) is not negligible and needs to be included.