• Journal of Plant Biology
• /
• 제31권3호
• /
• pp.217-226
• /
• 1988

Effects of simazine [2-chloro-4,6-bis(methylamino)-s-triazine] on the photochemical reactions of isolaed spinach chloroplasts and crude thylakoids of Anabaena inequalis UTEX B-381 were compared. Simazine inhibited photosynthetic O2 evolution and increased the chlorophyll fluorescence in whole cells of Anabaena. The electron transfer from diphenylcarbazide to 2,6-dichlorophenolindophenol was inhibited by simazine treatment in spinach chloroplasts, but not in crude thylakoids of Anabaena. In spinach chloroplasts, the chlorophyll fluorescence was increased by simazine treatment in the presence of diphenylcarbazide and ferricyanide, but not in the presence of diphenylcarbazide and silicomolybdate. In crude thylakoids of Anabaena, simazine treatment did not increase the chlorophyll fluorescence in the presence of either diphenylcarbazide and silicomolybdate, or diphenylcarbazide and ferricyanide. There results suggest that the inhibitory site of simazine on photosynthetic electron transport chain of anabaena is different from that of spinach chloroplasts. And there may be a possiblity that the inhibition site of simazine in Anabaena lies on the donor side of photosystem II, before the site of electron donation by diphenylcarbazide.

• Bulletin of the Korean Chemical Society
• /
• 제33권6호
• /
• pp.1967-1971
• /
• 2012

A hexavalent chromium (Cr (VI)) is one of the hazardous substances regulated by the RoHS. The determination of Cr (VI) in various polymers and printed circuit board (PCB) has been very important. In this study, the three different analytical methods were investigated for the determination of a hexavalent chromium in Acrylonitrile Butadiene Styrene copolymer (ABS) and PCB. The results by three analytical methods were obtained and compared. An analytical method by UV-Visible spectrometer has been generally used for the determination of Cr (VI) in a sample, but a hexavalent chromium should complex with diphenylcarbazide for the detection in the method. The complexation did make an adverse effect on the quantitative analysis of Cr (VI) in ABS. The analytical method using diphenylcarbazide was also not applicable to printed circuit board (PCB) because PCB contained lots of irons. The irons interfered with the analysis of hexavalent chromium because those also could complex with diphenylcarbazide. In this study, hexavalent chromiums in PCB have been separated by ion chromatography (IC), then directly and selectively detected by inductively coupled plasma atomic emission spectrometry (ICP-AES). The quantity of Cr (VI) in PCB was 0.1 mg/kg.

• Bulletin of the Korean Chemical Society
• /
• 제33권4호
• /
• pp.1247-1252
• /
• 2012

In this paper, a potentiometric sensor based on polyaniline conducting polymer for potentiometric determination of Cr (VI) ions is reported. Polyaniline was synthesized electrochemically (cyclic voltammetry method) onto a micro pencil graphite electrode (0.7 mm diameter) in the presence of HCl and diphenylcarbazide (termed as (PGE/PAni/DPC). Some initial experiments were performed in order to find out the optimized conditions for preparation of the introduced Cr (VI) sensor electrode. The plot of E vs. log [Cr (VI)], showed a linear response in the range from $1.0{\times}10^{-6}$ to $1.0{\times}10^{-1}$ M. High repeatability with the detection limit of $8.0{\times}10^{-7}$ M was obtained.

• Bulletin of the Korean Chemical Society
• /
• 제16권5호
• /
• pp.454-458
• /
• 1995

Inhibiting action of semicarbazide, thiosemicarbazide, sym. diphenylcarbazide towards corrosion of zinc in hydrochloric acid has been investigated. The rate of corrosion depends on the nature of the inhibitor and its concentration. The values of inhibition efficiency from, weight loss, thermometric measurements are in good agreement with those obtained from polarization studies. From the polarization studies, the inhibitors used act as mixed absorption type inhibitors, increased adsorption resulting from an increase in the electron density at the reactive C=S and C=O groups and N-atoms. The thermodynamic parameters of adsorption obtained using Bockris-Swinkels adsorption isotherm reveal a strong interaction of these carbazides on zinc surface.

• Journal of Plant Biology
• /
• 제37권2호
• /
• pp.231-236
• /
• 1994

분리한 시금치 엽록체에 $Cd^{2+}$을 처리하였을 때 광계 I에 비해서 광계 II의 활성이 낮은 농도의 $Cd^{2+}$에 의해 억제되었다. 그러므로 $Cd^{2+}$에 의해 1차적으로 광계 II 활성이 저해되었다는 것을 알 수 있다. 광계 II의 전자공여체인 diphenylcarbazide를 첨가했을 때 대조구에 비해 활성이 크게 증가하였다. $Cd^{2+}$ 처리시 $Mn^{2+}과\;Ca^{2+}을$ 외부에서 첨가했을 때 광계 II 활성은 회복되었지만 회복되는 정도가 15%로 낮았다. $50\;\mu\textrm{M}\;Cd^{2+}$ 처리구에서 광계 II 활성은 크게 감소하였으나 Fv/Fm는 미소하게 감소하였으며 $100\;\mu\textrm{M}\;Cd^{2+}$ 처리구에서 Fv/Fm는 크게 감소하였다. 광계 I활성은 $Cd^{2+}$의 처리 농도가 증가함에 따라 감소하였으나 세척하였을 경우 0.2 mM의 $Cd^{2+}$ 처리구에서 대조구보다 활성이 증가하였으며 농도가 높아짐에 따라 활성의 회복 정도가 컸다.

• 대한화학회지
• /
• 제25권4호
• /
• pp.275-282
• /
• 1981

試藥겔 粒子를 채운 마이크로分析컬럼을 사용하여 水溶液중의 ppm레벨 이하의 크롬(VI)이온의 簡易分析法을 開發하였다. 115∼150 mesh의 XAD-2 樹脂를 실온에서 10분동안 에탄올에 膨潤시킨 다음, 유리관(안지름 1.5 mm, 길이 65 mm)에 채워 넣고 $2.0{\times}10^{-3}M$ diphenylcarbazide(DPC)-에탄올용액 1ml를 20분 동안에 흘려 분석컬럼을 만든다. 이 컬럼에 크롬(VI)이온을 포함한 황산산성의 試料水(pH 1) 0.5 ml를 40분 동안에 흘리면 컬럼의 위 끝으로부터 DPC겔의 흰색은 赤紫色으로 변색된다. 着色帶의 길이는 컬럼을 통과한 試料水중의 크롬(VI)濃度에 比例하므로 일정량의 試料水를 흘린 다음, 着色帶의 길이를 측정하여 미리 작성한 檢量線으로부터 크롬(VI)이온의 濃度를 구할 수 있다. 이 법으로 0.1∼0.8 ppm의 크롬(VI)이온을 ${\pm}5{\sim}{\pm}15{\%}$의 相對誤差로 정량할 수 있다. 본법은 妨害이온의 영향이 적기 때문에 가리움劑로 EDTA를 써서 크롬(VI)이온 (0.6 ppm)의 100배량의 철(III)이온과 50배 양의 구리(II)이온을 음폐시킬 수 있으며, 工場廢水중의 크롬(VI)이온의 分析에 應用하여 만족한 결과를 얻었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3437-3442
• /
• 2011

An on-line flow injection analysis with dual pre-concentration method was developed to determine the ultra trace tri and hexavalent chromium in water. In this system, the cation and anion pre-concentration columns were combined with a 10-port injection valve and then used to separate and concentrate Cr (III) and Cr (VI) selectively. The two species of concentrated chromium were sequentially eluted and determined by using HCl-KCl buffer of pH 1.8 as an eluent. Cr (III) was oxidized by hydrogen peroxide to Cr (VI). It was detected spectrophotometrically at 548 nm by complexation with DPC (diphenylcarbazide). Several factors such as concentration of $H_2O_2$, DPC and coil length in reaction condition were optimized. The linear range for Cr (III) and Cr (VI) was 0.1-50 ${\mu}g$/L. The limit of detections ($3{\sigma}$) of Cr (III) and Cr (VI) were 52 ng/L and 44 ng/L under the optimized FIA system, and their recoveries 98% and 103%, respectively. This method was applied to analyze contamination level of chromium species in tap water, groundwater and bottled water.

• Journal of Plant Biology
• /
• 제36권3호
• /
• pp.195-201
• /
• 1993

The room temperature fluorescence induction of chloroplasts was utilized as a probe to locate the site of inhibition by mercury, copper and zinc on PS II by mercury. Inhibitory effect of Hg2+ on electron transport activity was notable as compared with Cu2+ and Zn2+. At concentrations of HgCl2 over 50 $\mu$M, activities of PS II and whole-chain electron transport decreased more than 70%, while that of PS I decreased about 10~30%. This suggests that PS II is more susceptible to Hg2+ than PS I is. In the presence of diphenylcarbazide (DPC), 50 $\mu$M HgCl2 inhibited the reduction of dichlorophenolindophenol (DCPIP) about 50%. Addition of heavy metals induced marked decrease in maximal variable fluorescence/initial fluorescence [(Fv)m/Fo], but no changes in Fo. With various concentrations of heavy metals, changes of chlorophyll a fluorescence emitted by PS II showed gradual decrease in photochemical quenching (qQ), which indicates an increase in reduced state of electron acceptor, QA. Especially, the addition of HgCl2 caused a notable decrease of qQ. In the presence of 50 $\mu$M CuCl2, energy-depended quenching (qE) was completely reduced, whereas in the presence of 50 $\mu$M CuCl2 and ZnCl2 it was still remained. The above results are discussed on the effects of mercury in relation to water-splitting system and plastoquinone (PQ) shuttle system.

• 분석과학
• /
• 제12권5호
• /
• pp.447-459
• /
• 1999

용접 흄에 존재하는 6가 크롬의 분석방법을 평가하기 위하여 깨끗한 PVC여과지와 용접 흄 매트릭스의 여과지에 일정량의 6가 크롬과 3가 크롬을 첨가한 후 NIOSH 7600 및 7604의 알카리 추출방법, 마그네슘 첨가방법, 아세트산 나트륨 완충액 추출로 전처리를 하여 분광광도계(DPC), 유도결합플라스마-광학발광분석법(ICP-OES), 이온크로마토그래피(IC)로 분석하였다. 위 전처리 방법은 모두 부적절하여 새로운 방법으로 알카리 용액상에서 초음파 추출하는 방법을 제안하였다. NIOSH에서 추천하는 2% NaOH/3% $Na_2CO_3$ 추출방법은 6가 크롬만 있을 때 적합하고 3가 크롬이 있으면 일부가 6가 크롬으로 산화된다. 산화 경향은 용접 흄이 있을 때 크게 나타났다. 분광광도계를 이용한 diphenylcarbazide방법은 저농도와 고농도의 6가 크롬이 있을 때 부적합하고 알카리 추출을 하면 ICP-OES분석방법이나 IC분석방법이 적합하다. 용접 흄 중 6가 크롬을 전처리하는 방법으로 NIOSH 방법의 $135^{\circ}C$로 가열하는 대신 초음파처리를 하면 3가의 6가로의 산화를 훨씬 억제할 수 있다. 즉, 2% NaOH/3% $Na_2CO_3$로 초음파처리를 60분 이내에 실시하여 IC 또는 ICP-OES(또는 AAS)로 측정하면 된다.

• 대한화학회지
• /
• 제27권5호
• /
• pp.345-352
• /
• 1983

Diphenylcarbazide를 흡착시킨 큰 그물구조 수지를 사용하여 컬럼 조작에 의해 0.1M 황산수용액에서 크롬(Ⅵ)이온을 선택적으로 농축하였다. 시료수의 액성과 유속을 조절하여 각종 수지에 대해 크롬(Ⅵ)이온 추출실험을 한 결과 Diaion HP-20이 가장 큰 돌파교환용량을 나타내었다. Diaion HP-20에 대해 크롬(Ⅵ)이온의 돌파점은 흡착된 DPC의 농도에 비례하였으며 크롬(Ⅵ)이온의 농도가 진할 때가 묽을 때 보다 높은 돌파교환용량을 나타냈다. 또한 일반 환경수 속에 공존되기 쉬운 각종 중금속 이온들에 대한 크롬(Ⅵ)이온의 농축에 미치는 영향을 조사한 결과 10ppm 크롬(Ⅵ)이온에 대해 철(Ⅲ)이온을 제외한 모든 금속 이온들은 100배까지 공존하여도 영향을 미치지 않았으며 철(Ⅲ)이온은 10배까지 방해되지 않았다. 크롬(Ⅵ)이온 추출에 이용된 겔 입자는 메탄올로서 쉽고도 효과적으로 재생되므로 반복 사용할 수 있다.