• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.4
• /
• pp.76-90
• /
• 2000

The estimation of material cycle of pollutants is necessary for the environment management in coastal zone. Model for material budgets are useful tools to understand the phenomena of natural system and to provide an insight into the complex processes including physical, chemical and biological processes occuring in natural system. Budgets of fresh water, salt and nutrients were estimated in order to clarify the characteristics of seasonal material cycle in Keum river estuary. Inflow volumes of freshwater into system was approximately 1.014×10/sup 8/～12.565×10/sup 8/m³/month and discharge in Keum river has occupied 99.7% of total freshwater. Seasonal variations of freshwater volume in the system were found to be very high in the range of about 4 ～ 14 times due to rainfall in summer season. Existing water mass of freshwater in system calculated by salt budget was approximately 0.339×10/sup 8/～0.652×10/sup 8/m³. Mean residence time of freshwater was calculated to be about 1.6～10.0day, and exchange time was calculated to be about 2.2～11.9day. Mean residence time was short as 1.6day in summer due to precipitation, and long as 10.1day in winter due to a drought. Inflow masses of DIP and DIN were approximately 5.57～32.68ton/month and 234.93～2,373.39ton/month, respectively. Seasonal inflow mass of DIP was larger than the outflow mass except for summer season. Thus, we postulate that accumulation of DIP in the system will happen. Residence times of DIP and DIN were calculated to be 1.1～6.4day and 1.8～10.9day, respectively. The ratio of water residence time versus DIP, DIN residence time was calculated to be 0.39～2.31 times and 0.83～1.13 times, respectively.

• Clean Technology
• /
• v.7 no.1
• /
• pp.65-74
• /
• 2001

Modified dip-coating method 8.3 times shorten in solution volume-coated and 83.3 times in coating time than existing dip-coating method. Coating weight increased nearly 2~3 times. So modified dip-coating method is evaluated that it is economic and has a efficiency. When we make an experiment in coated $LaCoO_3$ on ceramic monolith in modified dip-coating method which use 2 coating applications with relative viscosity $0.006202kg{\cdot}m/sec$, it showed a superior reaction at 88.56mg per ceramic unit gram in NO-CO reaction(optimum coating amount). When we make an experiment in the same size of ceramic filter cell with different conditions 100, 200cell per square inch, the result in low temperature($200^{\circ}C{\sim}350^{\circ}C$), 200cell3 per square inch is 6~23% higher in NO reduction and 11% in CO oxidation than 100cell per square inch. It is because the more the number of cells in the ceramic filter increase, the more catalytic surface area is expanded.

• Journal of Korea Multimedia Society
• /
• v.12 no.7
• /
• pp.947-952
• /
• 2009

In this paper, we propose a method of generating color sketch images using the DIP operator. In the proposed method, an input RGB color image is first transformed into an HSV color image. A sketch image of the V component image is then extracted by applying the DIP operator to the V component image, which is the brightness component of the input image. For the visual convenience, the extracted sketch image of the V component image is next inverted and contrast-stretched. The S component image is also enhanced to deepen the color of output sketch image while maintaining its color. Finally, the V and S component images along with the original H component image are transformed into an output RGB color sketch image. Experimental results show that the proposed method yields output color sketch images similar to hand-drawn sketch pictures whose colors are the same as those of input color images.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.4
• /
• pp.30-36
• /
• 2002

This research was conducted to investigate the feasibility of using deinked pulp of white ledger(DIP) for the manufacture of high quality premium tissue. The three types of tissues were prepared using the softener treated bleached DIP, softener treated mixed pulp of unbleached DIP and virgin pulp, and untreated mixed pulp of bleached DIP and virgin pulp, respectively, and their tensile index. softness, and brightness were measured and compared. The bulk and surface softness increased only slightly by the addition of softener(0.2% mineral oil) into the bleached DIP. The tensile index was decreased by 15∼30%, and the brightness was the range of 86% to 87% ISO. The softener(0.2∼0.8% mineral oil or dialkyl imidazoline) treatment of mixed pulp of unbleached DIP and virgin pulp Improved the bulk and surface of tissue considerably. However, the brightness was low as 85% ISO or below. Although the softness of the tissue made from bleached DIP blended with virgin pulp was the lowest among three types of tissues evaluated, its tensile index was the highest and brightness was 87∼88% ISO. Based on the results, it may be predicted that the bleached DIP blended with virgin pulp is the best raw material for the manufacture of high quality premium tissue if softener treatment is applied to mixed pulp, because the softness can be improved by the addition of softener. In general, the softness of tissue was improved with the increase in the amount of softener: However, the tensile index inversely proportional to the amount of softener added. Dialkyl imidazoline was more effective than mineral oil with respect to the improvement in softness, even though the loss in tensile index was severe with the treatment of dialkyl imidazoline.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.5
• /
• pp.540-546
• /
• 2010

We investigated variations in alkaline phosphatase (APase) activity and alkaline phosphatase hydrolyzable phosphorus (APHP) in northern Gamak Bay from September to December 2009. Dissolved inorganic nitrogen (DIN) and dissolved inorganic phosphorus (DIP) decreased gradually, and the DIN/DIP ratio was higher than the Redfield ratio (16) based on molecular concentrations during most of the observation period. The total APase (T-APase) activity increased with decreasing DIP concentration; i.e., the Relationship between T-APase and DIP showed a high negative correlation (r=-0.80, P<0.001), with APase activity being a good indicator of DIP limiting the Redfield ratio. The T-APase was positively correlated with the concentration of chlorophyll a (r=0.73, P<0.001). This suggests that a major portion of APase activity in northen Gamak Bay seawater is attributed to phytoplankton. The proportion of APHP among dissolved organic phosphorus (DOP) was low in September and high in November. Thus, APase-producing phytoplankton may be able to grow by utilizing APHP as a phosphorus source in autumn when DIP is limiting. Thus, APase activity and the use of DOP by phytoplankton may play an important role in the growth of phytoplankton under DIP limiting conditions such as those of northern Gamak Bay.

• Journal of Environmental Science International
• /
• v.15 no.8
• /
• pp.727-735
• /
• 2006

In this study, the PHYTO-PAM-fluorometric method was used to evaluate the ETR$_{max}$ in terms of sensitivity to DIN/DIP against 14 microalgae: Prorocentrum micans, Heterocapsa triquetra, Gymnodinium impudicum, Cymnodinium catenatum, Amphidinium caterae, Chlorella vulgaris, Chroococcus minutus, Microcystis aeruginosa, Chlorella ellipsoidea, Nannochloris oculata, Oocystis lacustris, Chroomonas salina, Gloeocystis gigas, and Prymnessium parvum. We found that P. micans, H. triquetra, and A. caterae exposed to the maximum level of DIN/DIP were significantly smaller in the ETR$_{max}$ than that of the minimum and moderate mixture. Unlikely the ETR$_{max}$, the initial slope alpha was not significantly different at the level of 60 DIN/DIP. In G. catenatum, the moderate levels of 15 and 20 in DIN/DIP were found to be significantly different from the ETR$_{max}$ at Chl-Ch4. Gymnodinium impudicum had a higher value than that of the ETR$_{max}$ than that of dinoflagellates used in this study, ranging from 306.1 (Ch4, DIN/DIP: 10) to 520.1 (Ch4, DIN/DIP: 30). The ETR$_{max}$ value obtained from other microalgae was similar to C. impudicum at any of the ratios of DIN/DIP and channels. Consequently, the influence of offshore water current assures us of the suppression of photosynthesis and electron transport rate in dinoflagellates. Gymnodinium impudicum has not been researched in the area of red tides in Korea, but it will be enough to creat the massive algal blooms in the future because of higher potential photochemical availability.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.3
• /
• pp.195-201
• /
• 2013

In this paper, we present optimization technique for the response time of DVR (Dynamic Voltage Restorer) and the possible compensation range of voltage dip by the DVR system. To protect 3-phase phase-controlled rectifier from voltage dip, DVR system needs to have optimum response time as an important design factor. Although the fast response time of DVR ensures wider range of voltage dip, DVR controller has so high cost and poor stability. This paper proposes DVR system with optimum response time required for certain intensity of voltage dips and good stability to support possible compensation range of voltage dip. Proposed technique showed optimum response time and good stability for overall system. We believe that proposed technique is reliable and useful in DVR design.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1443-1446
• /
• 2003

본 논문에서는 MPEG-21 프레임워크에서 이용되는 기본 단위인 디지털 아이템(Digital Item)의 처리에 관한 과정을 설명하고, 처리과정에 적용 가능한 디지털 아이템의 모델링에 대하여 논하였다 MPEG-21 에서 정의된 디지털 아이템 선언(Digital Item Declaration;DID)은 디지털 아이템의 정적인 선언에 그치는 반면, 디지털 아이템 프로세싱(Digital Item Processing;DIP)을 기반으로 한 디지털 아이템에는 처리 및 이용에 관한 기능이 부여된다. 모델링된 디지털 아이템의 처리를 위한 구조를 정의하고, DIP 구조와 디지털 아이템의 유효성을 입증하기 위해 교육용 멀티미디어 컨텐츠를 담고 있는 디지털아이템을 생성하였다. 또한 DIP 기반에서 모델링된 디지털 아이템을 소비할 수 있는 디지털 아이템 플레이어의 구현과 테스트 결과에 대해서도 설명하였다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1177-1181
• /
• 2010

Unsaturated soil can describe soil particles, air-water and contact face between air and water. The providing a simple method to predict water content in Geotechnical mechanics is very important. In this experiment, DIP (Digital Image Processing) and electrical resistivity techniques were used simultaneously to predict the saturation degree, and the results of two techniques will be compared each other to get conclusion. The experiment was carried out for Jumunjin standard sand. The picture of experimental column of soil and water was taken at different times, then using DIP technique to measure Color number-the height of capillary in soil column. At the same time, measure electrical resistivity of the soil.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.11
• /
• pp.54-61
• /
• 2012

This study investigated the relationship between the response time of DVR (Dynamic Voltage Restorer) and the possible compensation range for voltage dips by the DVR system which protects the 3-phase phase-controlled rectifier from said dips. As a result, the permissible range of voltage dip is presented in a 3-phase phase-controlled rectifier. When the DVR compensates for voltage dip, the range of voltage dip can be compensated according to the DVR's response time. Using the proposed method, DVR response time can be determined from the parameters of the 3-phase phase-controlled rectifier and the possible compensatory range of voltage dip, while at the same time it is possible to use a control system having an appropriate speed. Therefore, the use of excessively fast equipment can be avoided, improving the stability of the overall system. The reliability of the DVR concerning the 3-phase phase-controlled rectifier can be verified by simulation.