• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.786-790
• /
• 1987

This paper describes a systein which enables a fast 3 -dimensional profile measurement using a slit-ray projection method. One distinctive feature of this system is that a real-time video is processor is employed in order to reduce the amount of image data to be processed without eliminating essential information. Experimental results show that a calibrating method presented for the TV camera and the slit-ray projector is convenient and enables sufficient accurate measurements.

• 항공우주기술
• /
• 제3권1호
• /
• pp.117-125
• /
• 2004

최근 중ㆍ대형 산업품에 대한 비접촉식 3차원 정밀 측정 장비가 개발되고 있다. 이러한 장비 중 하나인 데오드라이트 측정 시스템이 항공우주산업에 널리 활용되고 있다. 본 논문에서는 데오드라이트 시스템을 이용하여 근역장에서의 RF 프로브에 대한 위성체 탑재 안테나의 레인지 얼라인먼트 측정 방법을 기술하였다. Ku-band 및 Ka-band 안테나의 레인지 얼라인먼트 측정 및 조정을 측정 정확도 ±1 mm 및 ±$0.05^{circ}$도 이내에서 성공적으로 수행하였다.

• 대한인간공학회지
• /
• 제20권3호
• /
• pp.77-88
• /
• 2001

A three dimensional body scanner for anthropomentric measurement has been developed. In this study, the slit laser beam projection method followed by digital image processing was used to provide accurate spatial data with the typical optical triangulation method to overcome the many difficulties in traditional in accurate and time-consuming tactic measurement method using rulers and gauges. Compared with other commercialized scanners. this system can obtain a relatively wide range of data at a much lower cost by the specially designed scanning process such as the simultaneous acquisition of vertical and horizontal body cross-section profiles.

• 대한기계학회논문집
• /
• 제16권8호
• /
• pp.1530-1535
• /
• 1992

본 연구에서는 초정밀 경면의 표면형상을 비접촉식으로 측정하기 위한 광위상 간섭법(phase shifting interferometry)에 관한 연구결과를 기술하였다. 리닉(lin- nik) 광학계를 이용한 광위상간섭에 대한 기본 측정원리를 정립하고 표면측정을 위한 간섭무늬처리 영상해석 알고리즘을 개발하였다. 그리고 실제적인 경면의 측정을 통 하여 개발한 광학계 및 측정 알고리즘의 타당성을 검증하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권6호
• /
• pp.595-602
• /
• 2018

Quality control (QC) of Computed Tomography (CT) devices is based on image quality measurement on AAPM CT phantom which is a standard phantom. Although it is possible to control the accuracy of the CT apparatus, it is expensive and has a disadvantage of low penetration rate. Therefore, in this study, we make image quality measurement phantom at low cost using FFF (Fused Filament Fabrication) type three-dimensional printer and try to analyze the usefulness, compare it with existing standard phantom. To print a phantom, We used three-dimensional printer of the FFF system and PLA (Poly Lactic Acid, density: $1.24g/cm^3$) filament, and the CT device of 64 MDCT (Aquilion CX, Toshiba, Japan). In addition, we printed a phantom using three-dimensional printer after design using various tool based on existing standard phantom. For image quality evaluation, AAPM CT phantom and self-generated phantom were measured 10 times for each block. The measured data were analyzed for significance using the Mannwhiteney U-test of SPSS (Version 22.0, SPSS, Chicago, IL, USA). As a result of the analysis, phantom fabricated with three-dimensional printer and standard phantom showed no significant difference (p>0.05). Furthermore, we confirmed that image quality measurement performance of a phantom using three-dimensional printer is similar to the existing standard phantom. In conclusion, we confirmed the possibility of low cost phantom fabrication using three dimensional printer.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.100-100
• /
• 2003

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.263-264
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.537-538
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.265-266
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.649-650
• /
• 2008