• 한국주거학회논문집
• /
• 제13권2호
• /
• pp.47-53
• /
• 2002

The purposes of this study actually measure to the dimension and the quality of material play equipment's examine whether they meet safety standards or not, and intend to offer basic data to present proper safety standards concerning the dimension of play equipment in the end. The subjects for this study were 59 outdoor playgrounds, 30 among them located in apartment sites and the remainder did in residential districts. The time of actual measurement was in June 1999, and June 2000. Data were analyzed into frequency, percentage, mean, and standard deviation by using SPSSWIN program. The main results were as follows.: First, more than half of playgrounds were assessed for being traffic hazards due to the adjacent streets. And they were hardly equipped with the toilet and drinking water facilities, but were almost equipped with the shade of a tree and benches. Second, it was caused in inconvenience of children's use and difficulty of play equipments'management, since the quality of play equipments materials was consisted of wood or metal. Third, the standards for swing and slide were established in detail and actual measurement's results were suitable to standards'value as well, whereas the standards for seesaw and climber were not in detail and they did not design or install suitably.

• 한국산학기술학회논문지
• /
• 제4권3호
• /
• pp.164-167
• /
• 2003

본 연구에서는 무선부품의 일종인 cavity filter금형을 제작하여 도금용 ABS 수지와 PC/ABS alloy 수지를 사용하여 일반사출성형과 금형온도가 높은 MmSH방식, 두 타입으로 성형품을 제작하였다. 성형품의 수축률 변화는 MmSH 방식일 때 ABS 성형품의 단위캐비티 격막부분에서 수축률이 감소되었다. 중량변화는 ABS와 PC/ABS 성형품 모두 MmSH 방식일 때 증가하였고, 성형품 표면 거칠기는 MmSH 방식일 때 모두 거칠기가 감소되었다.

• 한국조리학회지
• /
• 제14권4호
• /
• pp.306-316
• /
• 2008

The purpose of this study is to identify how and job satisfaction and job training affect service quality and to offer strategic tools for enhancing competitiveness of the food service business industry. To fulfill this purpose, this study utilized a factor analysis, frequence test, a reliability analysis and a covariance structure analysis. The results of the analyses show that one dimension such as "job training" influenced service quality. This means that restaurants should put more focus on job training to improve service quality for customers.

• 수산해양교육연구
• /
• 제22권4호
• /
• pp.553-565
• /
• 2010

The paper aims to evaluate the quality of fisheries census statistic and to provide some desirable directions and improvements for the future fisheries census, conducted by the Government. For the quality diagnosis of fisheries census statistic, specific processes of fisheries census and statistical qualities of each dimension are surveyed and evaluated by a Government's practician, two external examiners and a research group. Results show that census design, data analysis and quality control are evaluated relatively low in specific processes, and accessibility and comparability are evaluated relatively lower than relevance, accuracy, timeliness and consistency in statistical qualities. For minimizing the sampling errors, the probability proportion method should be employed in sampling methods from currently simple sampling method. In addition, fisheries census statistic is desirable to include and compare with those of different countries for consumer oriented data system.

• 한국의류학회지
• /
• 제32권5호
• /
• pp.729-740
• /
• 2008

The purposes of this study are to identify service quality elements using Kano's theory, and to examine differences in service quality characteristics among apparel store types. Women over 20 years-old from metropolitan areas in South Korea participated in the study and a quota sampling method was used. The questionnaire was composed of three sections; importance of quality, degree of satisfaction, and demographic factors. Data from 525 questionnaires were used for the statistical analysis. The results were as follows: First, four factors of service quality(sales person, variety of goods, policy, and facilities) were identified. According to Kano's quality elements, sales person was categorized into both one-dimensional quality and must-be quality, and variety of goods, policy, and facilities categorized into attractive quality. Second, sales person, in all store types, was included in one-dimension quality elements and sales person and variety of goods, in local store, were included in attractive quality element. Service policy, in chain store and local store, was included in attractive quality element. Findings of this study provide both industry and academic researchers with a guide to increase customer satisfaction in the store service strategies.

• 한국환경과학회지
• /
• 제11권9호
• /
• pp.955-960
• /
• 2002

The recycled washwater, which has different water quality and is produced about 5 to 20% of the total water volume treated, affects the unit operation of water treatment, especially coagulation process. However, the effects of recycled washwater on unit operation of water treatment have not been fully investigated. In this study, effects of recycled washwater on coagulation process were investigated to find the optimum coagulation condition by analyzing turbidity, $UV_{254}$, TOC removal efficiencies. In addition, effects of recycled washwater on residual Al after coagulation were studied by analyzing soluble and particulate Al. The size distribution and fractal dimension of coagulated also analyzed. The recycled washwater was lower pH than the raw water. And the recycled washwater had higher $UV_{254}$, TOC and residual Al concentration than the raw water. Residual Al concentration of recycled washwater was about 50 times higher than that of raw water. Optimum coagulant dosages on the blending recycled washwater and the raw water for turbidity, $UV_{254}$ and Al removal were lower than that on the raw water. However, TOC removal increased by increasing coagulant dosage. The size and fractal dimension of coagulated particle produced in the blending recycled washwater were larger, which imply faster settling velocity, than those produced in the raw water only.

• 한국정밀공학회지
• /
• 제31권7호
• /
• pp.615-622
• /
• 2014

Copper pipes have been widely used as components of System Air-Conditioner due to high thermal conductivity. This system consists of 150 pipes, which are approximately 10m long in total. Dimensional changes occur during pipe processing such as expansion, reduction and bending. This processing induces changes in length of pipes and makes dimensional differences from original pipes. The summation of the differences of pipes components leads to make huge cumulative dimensional differences. The cumulative differences can cause serious problems such as crack, refrigerant leakage. However the differences have not been considered so far. To satisfy target quality of the system, it is essential to predict and calibrate the differences. In this paper, the changes in dimension were predicted using FEM and it was found that cumulative differences could cause indesirable stress during assembly process. As a result, dimensional differences or indesirable stress could be reduced using the proposed method.

• 한국컴퓨터정보학회논문지
• /
• 제22권6호
• /
• pp.109-114
• /
• 2017

In this paper, I propose the effects of food therapy on subjects' health and happiness. The result has come out that food therapy enhances subjects' multi-dimensional health(medical, functional, self-evaluative) and their happiness. The participants were 230 adults over 30 years old living in Seoul and Gyeonggi district. To examine the effect of food therapy, the study sampled 220 questionnaire out of 230. By the non-equivalent control group design, the health levels were measured in three concepts: medical dimension, functional dimension and self-evaluative dimension. The results are as follows: First, participants who had taken food therapy for 3 months have been enhanced in their subjective and functional health level. Their subjective health enhanced from $2.80{\pm}.44$ to $4.07{\pm}.27$ (p=.000). And their functional health enhanced from $.92{\pm}.07$ to $.94{\pm}.07$(p=.035). Second, participants' happiness has enhanced significantly. Cognitive happiness enhanced from $3.39{\pm}.50$ to $3.84{\pm}.44$(p=.000). And emotional happiness enhanced from $2.76{\pm}.44$ to $3.07{\pm}.34$(p=.000). With this results, in case that people apply food therapy based on Yaksun, they are able to expect their enhancement of health level and happiness. Therefore study shows that Food therapy helps people to pursue their health and happiness improvement and suggest valuable information of a way to enhance quality of life.

• 대한가정학회지
• /
• 제48권7호
• /
• pp.89-97
• /
• 2010

The present study investigated the parenting alliance's mediating effects on the relationship between adult attachment and marital satisfaction. The participants were 157 married parents of young children(77 men and 80 women). We used the Experiences in Close Relationships Scales (Kim & Lee, 2005), Quality Marriage Index (Jang, 2001), and Parenting Alliance Inventory (Abidin, 1988) and analyzed data using descriptive statistics, Pearson's correlation, and regression analysis, via SPSS PC program(17.0 version). The results revealed that the effects of married males' avoidant dimension on marital satisfaction were partially mediated by their wives' parenting alliance. The effects of married females' anxious dimension on marital satisfaction were totally mediated, and the effects of married females' avoidant dimension on marital satisfaction were partially mediated, by their husbands' parenting alliance. In conclusion, the parenting alliance mediates the effects of adult attachment on marital satisfaction in couples with young children.

• 한국컴퓨터산업학회논문지
• /
• 제4권12호
• /
• pp.943-952
• /
• 2003

그레이팅이라는 금속 제품의 자동 설계 시스템인 GDS (Grating automatic Drawing System)는 기본 설계 도면 (Plan Drawing)의 정보들을 바탕으로 여러 세부 도면들을 자동 생성하는 시스템이다. 그러나 GDS를 통해 자동 생성된 도면은 설계자들의 일반적인 치수 기입 요령을 부분적으로 만족시키지 못하고 있으며 또 치수 표시 간의 겹침 현상이 발생하여 설계자가 도면을 수정해야 하는 번거로움이 있었다. 전문가 시스템은 컴퓨터 시스템에 입력된 특정분야에서의 전문가적지식(knowledge)과 사실(fact)들을 이용하여 전문가의 지 식 이 요구되는 문제들을 해결하기 위해 만들어진 시스템이다. 본 논문은 이러한 문제점을 해결하기 위하여 선계 전문가들의 치수 표시법을 지식으로 하여 규칙 기반 전문가 시스템을 구성하였다.