• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.201-207
• /
• 1999

The combustion characteristics for the low NOx 50 kW-class gas turbine combustor have been experimentally investigated. In order to achieve the premixing and the lean burn combustion, the geometries of the primary zone including premixed chamber were modified from conventional combustor. The centerline profiles of CO and NO concentration, and temperature were measured for the premixed combustors with or without dilution holes in the liner. The effects of the pilot fuel injection rate and air dilution on flame stabilization and pollutant (CO, NO) emission are discussed in detail.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.338-350
• /
• 2010

As existing materials for ground reinforcement, chemical grout material using cementitous materials and waterglass was used. But many problems in terms of ground reinforcement effects were implicated. In this study, for development and applicability verification of new materials, viscosity, fluidity, permeability, Self-Leveling, keeping of drilled hole, antiwashout underwater, resistance of water (groundwater dilution and minimize material eluting) and the early strength and long-term strength characteristics of developed materials was confirmed, and material standards, and establishing construction standards for the various model tests were conducted. As a result, high viscosity, flowability, permeability and keeping of drilled hole characteristics are excellent, in addition to the early strength properties, dilution does nat occur to groundwater, including groundwater is available for dealing with environmental issues. Application of basic and reinforcement method by Filler function in addition to structure can also or development of a new concept can be expected. In addition, middle and large-diameter drilled shaft, micropile, ground anchors, soil-nailing, steel pipes multi-grouting reinforcement for cement injection process could be used enough to even be considered.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.254-257
• /
• 2017

본 논문에서는 항공 가스 터빈용 연소기 개발을 위한 단일 연소기 섹터 시험 결과에 대한 논의하였다. 연소기로 공급되는 전체 공기 중 주 연소 영역으로 공급되는 공기비율을 변화 시키면서 배출물 농도, 라이너 표면 온도 분포 및 연소기 출구 온도 패턴 등의 연소 성능 변화를 연구하였다. 주 연소 공기량이 증가함에 따라 CO와 NOx 배출 농도가 증가하는 경향이 있었으며, 연소기 출구 패턴은 개선되는 것으로 나타났다. 희석 공기공을 회전시켜 배치하는 경우 연소기 출구 온도 패턴의 변화가 민감하게 변하는 것을 확인하였다. 이러한 연구 결과는 연소기의 효율, 내구성 및 배출물 감소 성능을 고려한 연소기 라이너 설계 최적화 과정의 기초 자료로 활용할 예정이다.

• 터널과지하공간
• /
• 제24권4호
• /
• pp.282-288
• /
• 2014

스토핑 채광법은 현재 가장 보편적으로 이용되고 있는 지하 금속광 채광법 중 하나이다. 그러나 채광과정에서 발생하는 확정선외 혼입은 광산 전반의 생산성을 떨어뜨리며 때때로 폐광의 주요 원인을 제공하기도 하여 그 예측과 관리가 시급한 실정이다. 이를 위해 본 연구는 서 호주의 한 지하광산에서 조사한 자료를 바탕으로 인공 신경망(ANN)을 이용하여 보다 신뢰성 있는 확정선외 혼입 예측모델을 제시하였다. 또한, 연결가중 알고리즘(CWA)에 의한 요인분석을 통해 확정선외 혼입의 영향인자에 대한 기여도 분석을 실시하였다. 제안된 확정선 외 혼입 예측 ANN 모델의 학습과 시험 단계의 상관계수는 0.9641과 0.7933으로 강한 상관관계를 보였으며, CWA분석결과 발파공 길이(BHL)과 절리 방향 안전계수(SFJ)의 기여도가 18.78%와 17.99%로 다른 인자에 비해 비교적 중요한 영향인자 임을 확인할 수 있었다.

• 대한환경공학회지
• /
• 제35권2호
• /
• pp.137-143
• /
• 2013

본 연구는 냄새 농도 평가를 위한 공기희석관능법의 단계별 희석가스 제조방법에 관한 것으로, 시료가스와 무취가스를 오리피스 튜브로 조절하여 희석하는 방법에 관한 것이다. 10배 및 30배 희석용 오리피스 튜브를 설계하고, 10, 30, 100, 300 및 1,000배 등의 단계별 희석가스를 10배 및 30배 희석용 오리피스 튜브를 반복적으로 사용하여 다양한 희석배율의 희석가스를 제조할 수 있다. 10배 희석용 오리피스 튜브의 홀 크기는 0.84 mm, 30배 희석용 오리피스 튜브의 홀 크기는 0.32 mm로 제작하였다. 제작된 냄새 평가를 위한 시료가스 희석용 오리피스 튜브에 의한 제조된 희석가스의 균질성은 2%RSD 내외로 우수한 재현성을 확인하였다. 또한, 기존 주사기를 이용하는 공기희석관능법에 의해 제조된 희석가스 농도와 비교하여 90% 이상의 상관성을 보이고 있었다. 진공펌프의 유량 변화에 따른 희석가스의 농도변화가 없이 간단히 진공흡인상자의 전단에 설치하여 활용할 수 있어 향후 다양한 현장 적용 평가 및 공기희석관능법과의 비교 연구를 통하여 현장에서의 복합악취 등의 평가에 활용할 수 있을 것으로 기대된다.

• 한국입자에어로졸학회지
• /
• 제14권4호
• /
• pp.191-203
• /
• 2018

IIn this study, we have developed drying systems for reducing the error by humidity on measuring particulate matter (PM) in the ambient air with optical particle measuring instruments. Two types of drying systems were designed: drying systems using heating and dilution methods. In addition, 3 types of drying systems using a heating method were designed: Type A (1 hole), B (3 holes) and C (7 holes). After making them, the laboratory and field tests were carried out to evaluate the developed drying systems. As a result, it was shown that the PM concentrations obtained by PM monitoring devices with drying systems agree well with that of the reference devices. Therefore, it could be concluded that the drying systems can be applied to PM monitoring devices for real-time monitoring of the ambient aerosols.

• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1789-1798
• /
• 1994

This paper aimed for numerical simulation of complicated gas turbine combustor with swirler. For the convenience of numerical analysis, fuel nozzle and air linear hole areas of secondary and dilution zone, which are issued to jet stream, were simplified to equivalent areas of annular type. In other to solve these problems, imaginary source terms which are corresponded to supplied fuel amount were added to those of governing equation. Chemical equilibrium model of infinite reaction rate and $k-{\epsilon}-g$ model with the consideration of density fluctuation were applied. As the result, swirl intensity contributed to mixing of supplied fuel and air, and to speed up the flame velocity than no swirl condition. Temperature profiles were higher than experimental results at the upstream and lower at the downstream, but total energy balance was accomplished. As these properties showed the similar trend qualitatively, simplified simulation method was worth to apply to complicated combustor for predicting combustion characteristics.

• 대한신경집중치료학회지
• /
• 제11권2호
• /
• pp.119-123
• /
• 2018

Background: Since the first report of a rapidly resolved subdural hemorrhage (SDH) in 1986, few additional case reports have been presented in the literature. Case Report: An 82-year-old female patient presented with a SDH over the left convexity. The SDH was removed via catheter drainage through a burr hole trephination. Post-operative computed tomography (CT) following 300 mL drainage from the chronic SDH demonstrated a newly developed SDH along the right convexity. A follow-up CT performed 2 hours later revealed an unexpected significant resolution of the acute SDH. Conclusion: The spontaneous resolution of acute SDH is believed to result from redistribution by washout of the hematoma by cerebrospinal fluid dilution. However, its exact pathophysiology is not well understood. When surgical evacuation is considered in acute SDH, conservative management should also be considered because spontaneous resolution of hemorrhage remains a possibility.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1171-1171
• /
• 2001

Quantitative analysis is an important requirement in exploration, mining and processing of minerals. There is an increasing need for the use of quantitative mineralogical data to assist with bore hole logging, deposit delineation, grade control, feed to processing plants and monitoring of solid process residues. Quantitative analysis using X-Ray Powder Diffraction (XRD) requires fine grinding and the addition of a reference material, or the application of Rietveld analysis to XRD patterns to provide accurate analysis of the suite of minerals present. Whilst accurate quantitative data can be obtained in this manner, the method is time consuming and limited to the laboratory. Mid infrared when combined with multivariant analysis has also been used for quantitative analysis. However, factors such as the absorption coefficients and refractive index of the minerals requires special sample preparation and dilution in a dispersive medium, such as KBr to minimize distortion of spectral features. In contrast, the lower intensity of the overtones and combinations of the fundamental vibrations in the near infrared allow direct measurement of virtually any solid without special sample preparation or dilution. Thus Near Infrared Spectroscopy (NIR) has found application for quantitative on-line/in line analysis and control in a range of processing applications which include, moisture control in clay and textile processing, fermentation processes, wheat analysis, gasoline analysis and chemicals and polymers. It is developing rapidly in the mineral exploration industry and has been underpinned by the development of portable NIR spectrometers and spectral libraries of a wide range of minerals. For example, iron ores have been identified and characterized in terms of the individual mineral components using field spectrometers. Data acquisition time of NIR field instruments is of the order of seconds and sample preparation is minimal. Consequently these types of spectrometers have great potential for in-line or on-line application in the minerals industry. To demonstrate the applicability of NIR field spectroscopy for quantitative analysis of minerals, a specific example on the quantification of lateritic bauxites will be presented. It has been shown that the application of Partial Least Squares regression analysis (PLS) to the NIR spectra can be used to quantify chemistry and mineralogy in a range of lateritic bauxites. Important, issues such as sampling, precision, repeatability, and replication which influence the results will be discussed.

• 천문학회보
• /
• 제40권1호
• /
• pp.43.1-43.1
• /
• 2015

We have discovered an unexplored population of galaxies featuring weak broad-line regions (BLRs) at z < 0.2 from detailed analysis of galaxy spectra in the Sloan Digital Sky Survey Data Release 7. These objects predominantly show a stellar continuum but also a broad $H{\alpha}$ emission line, indicating the presence of a low-luminosity active galactic nucleus (AGN) oriented so that we are viewing the central engine directly without significant obscuration. These accreting black holes have previously eluded detection due to their weak nature. The new BLR AGNs we found increased the number of known type 1 AGNs by 49%. Some of these new BLR AGNs were detected at the Chandra X-ray Observatory, and their X-ray properties confirm that they are indeed type 1 AGN. Based on our new and more complete catalogue of type 1 AGNs, we derived the type 1 fraction of AGNs as a function of [OIII] ${\lambda}5007$ emission luminosity and explored the possible dilution effect on the obscured AGN due to star-formation. The new type 1 AGN fraction shows much more complex behavior with respect to black hole mass and bolometric luminosity than suggested by the existing receding torus model. The type 1 AGN fraction is sensitive to both of these factors, and there seems to be a sweet spot (ridge) in the diagram of black hole mass and bolometric luminosity. Furthermore, we present a hint that the Eddington ratio plays a role in determining the opening angles. This work is submitted to ApJS.