• Economic and Environmental Geology
• /
• v.43 no.5
• /
• pp.443-453
• /
• 2010

The Samsung gold-silver deposit consists of quartz veins that fill along the fault zone within Cretaceous shale and sandstone. Mineralization is occurred within fault-breccia zones and can be divided into two stages. Stage I is main ore mineralization and stage II is barren. Stage I is associated with wall-rock alteration minerals(sericite, pyrite, chlorite, quartz), rutile, base-metal sulfides(pyrrhotite, pyrite, sphalerite, chalcopyrite, galena), and electrum. Stage II occur quartz, calcite and pyrite. Fluid inclusion data indicate that homogenization temperatures and salinities of stage I range from 145 to $309^{\circ}C$ and from 0.4 to 12.4 wt.% NaCl, respectively. It suggests that hydrothermal fluids were cooled and diluted with the mixing of meteoric water. The main deposition of base-metal sulfides and electrum occurred as a result of cooling and dilution at temperature between $200^{\circ}C$ and $300^{\circ}C$. Sulfur(9.3~10.8‰) isotope composition indicates that ore sulfur was mainly derived from a magmatic source as well as the host rocks. The calculated oxygen[-2.3~0.9‰(quartz: 0.3‰, 0.9‰, calcite: -2.3‰)] and hydrogen[-86~-76‰(quartz: -86‰, -82‰, calcite: -76‰)] isotope compositions indicate that hydrothermal fluids may be meteoric origin with some degree of mixing of another meteoric water for paragenetic time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.42-50
• /
• 2016

Overlay welding affects the chemical components and weld hardness by dilution of the lamination layer thickness, which determines the surface properties. This study experimentally investigates different numbers of layers for overlay welding monel materials, which are anti-corrosion materials. The Fe content, weldability of the base metal and monel materials, hardness, and surface flatness were examined. Each evaluation was carried out after overlay welding with three layers on the base material and pipe base material of the plate. The Fe content was evaluated by analyzing the constituents of each layer. The Fe content was satisfactory in the three layers. The weldability of the laminate specimens was evaluated by a bending test. The hardness and bead flatness of the laminate specimens were evaluated by micro Vickers and 3D measurements. The hardness was highest in the heat-affected zone with one layer, and it decreased with increasing lamination. In the case of bead flatness, there is a sharp difference in the deviation with increasing numbers of laminations, which should be considered carefully.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.460-465
• /
• 2005

Water and ethanol extracts from Rue were prepared, and their growth inhibiting activity against Helicobacter pylori and other biological activities were examined. Total phenolic compounds in the water and ethanol extracts were present at the concentration of 16.39 mg/g, and 17.07 mg/g, respectively. At the concentration of $200\;{\mu}g/mL$ of phenolic compounds concentration, water extract produced 12 mm inhibition zone while ethanol extract produced 13 mm. The ABTS [2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid)] radical decolorization and antioxidant protection factor (PF) were determined for extracts from Rue. Water extracts showed $96\%$ inhibition rate on ABTS, but ethanol extracts showed higher PF (1.2) than water extracts (0.8). Water extracts had higher electron donation ability on DPPH than ethanol extracts. But ethanol extracts had higher ACE (angiotensin converting enzyme) and xanthine oxidase inhibitory activities than water extracts. Rosemarinic acid and quercetin were the most abundant phenolic compounds as analyzed by HPLC.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2A
• /
• pp.123-130
• /
• 2012

A cooling system is indispensable for the fossil and nuclear power plants which produce electricity by rotating the turbines with hot steam. A cycle of the typical cooling system includes pumping of seawater at the intake pump house, exchange of heat at the condenser, and discharge of hot water to the sea. The cooling type of the nuclear power plants in Korea recently evolves from the conventional surface intake/discharge systems to the submerged intake/discharge systems that minimize effectively an intake temperature rise of the existing plants and that are beneficial to the marine environment by reducing the high temperature region with an intensive dilution due to a high velocity jet and density differential at the mixing zone. It is highly anticipated that the future nuclear power plants in Korea will accommodate the submerged cooling system in credit of supplying the lower temperature water in the summer season. This study investigates the approach flow patterns at the velocity caps and discharge flow patterns from diffusers using the 3-D computational fluid dynamics code of $FLOW-3D^{(R)}$. The approach flow test has been conducted at the velocity caps with and without a cap. The discharge flow from the diffuser was simulated for the single-port diffuser and multi-ports diffuser. The flow characteristics to the velocity cap with a cap demonstrate that fish entrainment can significantly be minimized on account of the low vertical flow component around the cap. The flow pattern around the diffuser is well agreed with the schematic diagram by Jirka and Harleman.

• Economic and Environmental Geology
• /
• v.42 no.3
• /
• pp.167-175
• /
• 2009

The geology of Sepola district in Mali is consisted of Birrimian group with metasedimentary rocks of lower Proterozoic and volcanoclastics, and later intrusive igneous rocks. Ore diposit in this district has the characteristics of vein- and disseminated-type gold deposit which was formed by infilling the secondary fracture zones related to the large-scale fault zone of NW direction within Birrimian group. It is confirmed as promising that Barani district has the gold grade of 0.53${\sim}$9.21 g/t with the extension of 1.3 km and width of 1 to 20.1 m. The ore mineralogy is simple with electrum, pyrite and galena. Fineness of gold grain ranges from 848 to 915(average 891) indicating mesothermal to hypothermal environment. Fluid inclusions are classified as liquid-rich type I. gas-rich type II and liquid-$CO_2$ bearing type III. Primary and pseudosecondary inclusions homogenize from 236 to 393$^{\circ}C$ with salinity of 0.0 to 8.6 wt% NaCl. Secondary inclusions homogenize from 103 to 184$^{\circ}C$ with salinity of 0.7 to 8.6 wt.%. From the relationship between homogeniztion temperature and salinity, it may be thought that auriferous fluid experienced dilution and cooling through inflow of meteoric water after fluid unmixing derived from pressure decrease in the temperature range of 400 to 250$^{\circ}C$. From the massive occurrence of quartz vein, simple mineralogy with paucity of sulfide, and presence of liquid-$CO_2$ bearing with high homogenization temperature, it is thought that gold mineralization in Sepola district correspods to the mesothermal to hypothermal ore deposit.

• Korean journal of food and cookery science
• /
• v.27 no.4
• /
• pp.17-26
• /
• 2011

This study was performed to analyze the antibacterial activity against food hazardous microorganisms and antimutagenic effects of Sanguisorba officinalis L. ethanol extracts on Salmonella Typhimurium TA100. The antibacterial activity was evaluated by paper disc diffusion assay, minimum inhibition concentration (MIC), and optical density of the culture with the ethanol extract for 24 hr. Antibacterial activity was tested with seven microorganisms including Escherichia coli, Escherichia coli O157:H7, Pseudomonas aeruginosa, Salmonella Typhimurium, Listeria monocytogenes, Bacillus cereus, and Staphylococcus aureus. The paper disc diffusion assay showed distinct clear inhibition zones around the discs treated with the extract for five microorganisms, except Escherichia coli and Escherichia coli O157:H7. MIC values were 0.625-2.5 mg/mL for these five strains that showed clear zones. The time-kill assay was consistent with the results from the paper disc diffusion assay and MIC test. Additionally, antimutagenicity of the extract was determined using the Ames test. The ethanol extract at 5 mg/plate inhibited 72.42% and 89.85% of mutagenicity induced by 4-nitroquinoline 1-oxide and sodium azide, respectively. These results demonstrate that the ethanol extract from S. officinalis L. has remarkable antibacterial activity and antimutagenicity.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.1
• /
• pp.50-56
• /
• 2001

Thirty-three bacterial and fungal strains were isolated from the rotten soybeans and soybean sprouts to isolate pathogenic microorganisms which cause soybean sprouts rot during soybean sprouts cultivation. In pathogenicity tests of the isolates on soybean sprouts, two isolates(K-17 and K-28) caused soybean sprouts rot and were identified as Erwinia carotovora and Fusarium sp., respectively. To isolate antagonists aganist K-17 and K-28 pathogens, bacteria were isolated from various soybean-cultivated soils and screened by the inhibition zone method. A bacterial isolate(J-232) which inhibited growth of both pathogens was identified as Pseudomonas fluorescens and further examined. The culture filtrate of P. fluorescens J-232 (dilution rate of 500 times) inhibited the growth of Erwinia carotovora K-17 and Fusarium sp. K-28 both on potato dextrose agar medium and on soybean sprouts cultivated in vessel. The development of soybean sprouts rots was observed during cultivation by inoculation of soybean seeds with culture filtrate of both pathogens. The combined inoculation of soybean seeds with culture filtrate of antagonistic bacterium and that of pathogens prevented soybean sprouts rot, and the growth of soybean sprouts was similar to that of control. The soybean sprouts inoculated with antagonists culture filtrate alone did not develop soybean sprouts rot, and the growth of the seedlings was shown to be slightly promoted as compared with that of control.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.9 no.2
• /
• pp.86-96
• /
• 1997

In order to investigate the formation of a shallow water front and its relation to water quality distributions, oceanographic measurements were made, and the numerical computations of the Simpson-Hunter stratification parameter log(H/U$^3$) were performed. It is shown from satellite image and hydrographic data that the shallow water front is formed near the northern Kaduk channel, and the stratification parameter log(H/U$^3$) near the front is in a range of 2.0-2.5. Measured COD (Chemical Oxygen Demand) concentrations in offshore region of the front and in the western part of the bay are below 2.0 mg/1. whereas the concentrations in Masan Bay located in the northern inside of the frontal zone are high as 3.0-5.5 mg/1. COD concentrations decrease gradually from Masan Bay toward the offshore due to the dilution by strong water mixing. Anoxic and hypoxic water masses at the bottom layer in summcr occur in the western part of Chinhae Bay and in Masan Bay, and DO (Dissolved Oxygen) concentrations become low with increasing the stratification parameter. DO concentrations outside the front are more than about 4.0 mg/1, whereas the concentrations inside the front are low. The shallow water front plays a significant role for material transport from coastal area to oceanic area, and the frontal region seems to be important physical and chemical boundaries.

• Korean Journal of Microbiology
• /
• v.41 no.4
• /
• pp.293-299
• /
• 2005

Many isolates from soil of Korean ginseng rhizosphere did not show remarkable growth on full strength of the conventional nutrient broth (NB medium) but grew on its 100-fold dilution (DNB medium). Six hundred-forty strains were isolated as oligotrophic bacteria. In the course of screening for new bioactive compounds from oligotrophic bacteria from soil, 8 strains which had appeared to form of clear zone on a medium containing colloidal chitin as a sole carbon source were selected for further studies. Strain CR42 hydrolyzed a fluorogenic analogue of chitin, 4-methylumbelliferyl-D-glucosaminide (MUF-NAG) . Mo st of the culture supernatant of these isolates hydrolyzed 4-methylumbelliferyl-D-N,N'-diacetylchitobioside (MUF-diNAG). The isolates were heterogeneous and categorized to gamma- and beta-proteobacteria, Bacillaceae, Actinobactepia, and Bacteroides by 16S rRNA analysis. Two strains, WR164 and CR18, had a 16S rRNA sequence of $95-96\%$ identical to uncultured bacteria. It was observed that CR2 and CR75 could inhibit the growth of Colletotrichum gloeosporioides with hyphal extention-inhibition assay on PDA plate supplemented with $1\%$ colloidal chitin.

• Restorative Dentistry and Endodontics
• /
• v.27 no.4
• /
• pp.355-362
• /
• 2002

One fifth dilution of formocresol is usually used for pulpotomy of the primary teeth and emergency pulpotomy of the permanent teeth. However the use of formaldehyde has been subjected to criticism because it may be absorbed into the blood stream and become distributed systemically, it nay also alter the pulp tissue rendering it immunologically active, and have carcinogenic potential. Recently Depulpin$^{\circledR}$(VoCo., Germany) gains popularity as a devitalizing agent during root canal therapy in spite of high concentration of 49 % paraformaldehyde because it facilitate devitalization of pulp and make root canal therapy easier But there have been not enough publications about the reaction of pulp and periapical tissue caused by Depulpin. This study was performed to evaluate the histological changes in pulp and periapical tissue of rats after pulpotomy using formocresol and Depulpin and to elucidate the toxic effects of these agents. Thirty six Sprague-Dawley rats were anesthetized by intraperitoneal injection of ketamine Maxillary first molar teeth were used for pulpotomy with formocresol and Depulpin. Rats were sacrificed after 2 days, 4 days, 1 week, 2 weeks, 3 weeks and 4 weeks respectively. Specimens were histologically observed by light microscope changes in pulp and periapical tissue. The obtained results were as follows. 1. Formocresol group A zone of fixed tissue. in which odontoblasts could clearly be defined, was present directly underneath the pulpotomy dressing in almost all teeth of this group. This was followed by an area of necrotic tissue which resembled dried out fibrous tissue with no cellular detail except some pyknotic nuclei. In the specimens of after 2 days, 4 days, 1 week, 2 weeks in which vital tissue was present, it was separated from the fibrous area by a zone of inflammation. In the specimens of after 3 weeks and after 4 weeks, inflammatory infiltrate was in the periodontal ligament adjacent to the apical foramina of the teeth. 2. Depulpin$^{\circledR}$ group The area of necrotic tissue which had no cells and fibers, was present adjacent to the dressing. This was followed by dried out fibrous tissue with no cellular details except some pyknotic nuclei, A short stump of vital pulp with odontoblasts was present at the end of the canal after 2 days. Inflammatory infiltrate was in the periodontal ligament after 4 days and after 1week. Severe root resolution and necrosis of periapical tissue opposite the root resorption site were defined after 2 weeks and after 3 weeks. Periapical lesion which consist of necrotic tissue surrounded by a fibrous connective wall, was found after 4 weeks. The results indicated that Depulpin can cause more adverse reaction to the dental pulp and periapical tissue than formocresol, and further studies are needed for its clinical use with safety.