• Journal of Welding and Joining
• /
• 제33권1호
• /
• pp.41-48
• /
• 2015

In this study, the effect of heat input on weld metal microstructure and the effects of dissimilar weld heat affected zone in quenched and tempered ASTM A517 on the stainless steel AISI 316L is investigated through the optimization of welding parameters. For this purpose, two welding techniques are used, tungsten-conventional gas and pulsed gas with weld wire ER 309MoL with Diameter 2.4 mm. Research showed that the grain size of the heat affected zone in pulsed welding is less compared with conventional welding; weld metal structure is fully austenitic, it has a finer structure in the pulsed method. Additionally, the growth of weld metal adjacent steel A517 is different from steel 316L. Further, investigation showed that the rate of dilution is less in the pulsed method and the impact energy is increased in each three regions of the weld metal and heat affected zones in the pulsed method; the fracture in the weld metal and heat affected zone of steel 316L is quite soft and it is semi-crispy in the heat affected zone of steel A517.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.1979-1983
• /
• 2008

The effects of carbon dioxide addition to oxygen have been investigated with swirl-stabilized premixed methane flame in a laboratory-scale pre-mixed combustor. The methane fuel and oxydant mixture gas ($CO_2$ and $O_2$) were mixed in a pre-mixer and introduced to the combustor through different degrees of swirl vanes. The flame characteristics were examined for different amount of carbon dioxide addition to the methane fuel and different swirl strengths. The effects of carbon dioxide addition and swirl intensity on the combustion characteristics of pre-mixed methane flames were examined using chemiluminescence techniques to provide information about flow field. The results show that the flame area increases at upstream of reaction zone because of increase in recirculation flow for increase in swirl intensity. The flame area is also increased at the downstream zone by recirculation flow because of increase in swirl intensity which results in higher centrifugal force. The OH and CH radical intensity of reaction zone decrease with carbon dioxide addition because the carbon dioxide plays a role of dilution gas in the reaction zone.

• 한방안이비인후피부과학회지
• /
• 제22권1호
• /
• pp.100-107
• /
• 2009

Objective : The purpose of this study is to investigate the antibacterial activity of Saussurea lappa for the applications of herb-based extracts to both cosmetic and medicinal industries. Methods : Antibacterial activity of ethanol extract of Saussutes lappa (ESL) was assessed using agar diffusion and broth dilution methods, and determined by whether clear zone was formed around paper disc and in terms of the size (mm) of clear zone, Results : ESL provided activity against Staphylococcus aureus KCTC 1927 in concentration of 1 mg/ml with an clear zone of 16 mm, and showed an activity against Staphylococcus epidermids KCTC 1917 in concentration of 1 mg/ml with an clear zone of 18mm. Moreover, the minimum inhibitory concentration (MIC) of ESL against S. sureus and S. epidermidls were 1 mg/ml for both bacterial species. However, ESL showed no growth inhibition against Pseudomonas aeruginosa KCTC 12513, Enterobactet aerogenes KCTC 2190, Escherichia coli KCTC 2571, Salmonella typhimurium KCTC 1925 and Propionibacterium acnes KCCM 41747. Conclusions : Antibacterial activity of ESL against Staphylococcus sureus and Staphylococcus epidermids causing eye and skin diseases was proved. The result suggest that ESL may be useful as a natural preservative on behalf of synthetic preservatives.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 추계학술대회
• /
• pp.153-158
• /
• 2004

해양에 방류되는 오폐수의 흐름형태 즉 흔합특성을 제어하고 설계하기 위해 다양한 연구가 진행되고 있다. 최근 들어 선진국을 중심으로 바람직한 수질관리를 목표로 법적혼합역과 관련한 수질기준을 정하여 오염무의 방류로 인한 해양수질환경의 오염을 최소화하고자 하는 노력이 진행되고 있다. 본 논문에서는 이러한 근역 및 원역에서의 법적혼합역을 CORMIX 모델로 구현하고 법적혼합역의 필요성을 강조하며 이를 효율적으로 규제하기 위한 방안을 모색하고자 하였다. 이는 보다 개선된 방류수 모델링을 제안하고 나아가 효율적인 해양방류관 설계뿐 아니라 건전한 항만의 설계 및 개발에 기여할 것이다.

• 한국해양환경ㆍ에너지학회지
• /
• 제4권2호
• /
• pp.15-24
• /
• 2001

Huang 등[1996]이 제안한 해양방류 혼합구역에 대한 분석방법을 활용하여 마산만 해양방류 해역의 혼합구역에서 주변해수의 흐름과 밀도성층의 변화에 따른 혼합 희석에 의한 수중방류하수의 농도변화분포를 산정하였다. 방류해역에서 5월 중순부터 8월 중순까지 3개월 동안 연속 관측된 조류의 매 시간별 유향과 유속변화에 따른 혼합구역에서의 하수농도분포를 계산하고, 마산만 해수유동에 있어 가장 큰 요소인 조류의 변화를 고려하여 15일 간격으로 방류하수의 평균된 농도분포를 구하였다. 이 결과에 의하면 조류의 유속이 상대적으로 강했던 기간동안에는 혼합구역에서의 평균농도는 매우 낮았고, 유속이 약했던 기간에는 낮은 희석률로 인해 평균농도가 매우 높게 나타났다. 그리고 관측된 조류의 주 방향으로 인해 혼합구역이 방류해역의 서측 해안까지 확장됨을 나타내었으며, 이는 방류해역에서 조사된 퇴적물의 오염도 분포결과와도 잘 일치되었다.

• Journal of Welding and Joining
• /
• 제31권6호
• /
• pp.96-106
• /
• 2013

In this study, the effect of laser source($CO_2$ and Nd:YAG) on the microstructure and tensile properties of laser welded Al-Si coated boron steel(1.2mmt) was investigated with before and after hot-stamping. In case of as welds condition, fracture occurred in base metal unrelated to the laser source. It could be explained that tensile strength of fusion zone composed of martensite and bainite is higher than that of base metal that contains a lot of ferrite despite dilution of Al and Si from coating layer to fusion zone. In case of hot-stamping condition, the fracture occurred in fusion zone irrelevant to laser source and the tensile strength was lower than hot stamped base metal. In the $CO_2$ laser welds, $Fe_3$(Al,Si) formed near the bond line was transformed into ferrite during hot-stamping. Therefore tensile strength of bond line is lower than that of base metal and center of fusion zone and the fracture occurred in the bond line. On the other hand, in the Nd:YAG laser welds, the higher concentration of Al formed the ferrite in the fusion zone during hot-stamping treatment. Also, the thickness of centerline was thinner than that of base metal. Therefore, it is considered that fracture occurred in centerline of fusion zone due to effect of concentration stress, and it leaded to a lower tensile strength and elongation.

• 대한기계학회논문집B
• /
• 제24권10호
• /
• pp.1294-1299
• /
• 2000

The combustion characteristics have been investigated to develop the 50 kW-class gas turbine combustor. The combustor design program was developed and applied to design this combustor. The combustion air which has the temperature of 45, 200, $300^{\circ}C$ were supplied to combustor for elucidating the effect of inlet air temperature on CO, NOx emissions and flame temperature. The exit temperature and NO were increased and CO was decreased with increasing inlet air temperature. Also, the effect of equivalence ratio was considered to verify the combustor performance. The emissions of CO and NO with inlet air temperature can be analyzed qualitatively by measuring the temperature inside the combustor. The combustion performance with fuel schedule was evaluated to get the informations of the starting and part loading process of gas turbine. The combustion was stable above the equivalence ratio of 0.18. The pattern factor which is the important parameter of combustor performance was satisfied with the design criterion. Consequently the combustor was proved to meet the performance goal required for the target gas turbine system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.155-160
• /
• 2001

The low NOx characteristics have been investigated to develop the combustor for micro turbine. The lean premixed combustion technology was applied to reduce the NOx emission. The test was conducted at the condition of high temperature and ambient pressure. The combustion air which has the temperature of $450\sim650K$ were supplied to the combustor through the air preheater. The temperature and emissions of NOx and CO were measured at the exit of combustor, The exit temperature and NOx were increased and CO was decreased with increasing inlet air temperature. The premixing chamber can be operated very lean condition of equivalence ratio around 0.35. The NOx was decreased with decreasing the equivalence ratio. The CO was decreased with decreasing the equivalence ratio, but the CO was increased with decreasing the equivalence ratio below 0.4. But, at the very lean condition of equivalence ratio below 0.35 both NOx and CO were increased because of the flame unstability. The NOx was decreased and CO was increased with increasing inlet air flowrate. This results can be used to determine the size of combustor. Consequently the performance of combustor shows the possibility of the application to the gas turbine system.

• 한국재료학회지
• /
• 제19권7호
• /
• pp.369-375
• /
• 2009

The spot weldability of dissimilar metal joints between stainless steels (AISI316) and interstitial free (IF) steels were investigated. This study was aimed to determine the spot welding parameters for a dissimilar metal joint and to evaluate the dissimilar metal joint's weldability, including its welding nugget shape, tensileshear strength, hardness, and microstructure. The fracture surface was investigated by using a Scanning Electron Microscopy (SEM). The experimental results showed that the shape of nugget was asymmetric, in which the fusion zone of the STS316 sheet was larger due to the higher bulk-resistance. The microstructure of the fusion zone was fully martensite. In order to evaluate the microstructure further, dilution of stainless steels were calculated and imposed onto the Schaeffler diagram. The predicted microstructure from the Schaeffler diagram was martensite. In order to confirm the predicted microstructure, XRD measurements were carried out. The results showed that that initial weld nugget was composed of austenite and martensite.

• 한국분말재료학회지
• /
• 제11권4호
• /
• pp.294-300
• /
• 2004

This study for preparation of aluminum nitride (AlN) with high purity was carried out by self-propagating high-temperature synthesis method in two different systems, $Al-N_{2}$ and $Al-N_{2}$-AlN, with the change of nitrogen gas pressure and dilution factor. On the occasion of $Al-N_{2}$ system, unreacted aluminum was detected in the product in spite of high nitrogen pressure, 10 MPa, This may be caused by obstructing nitrogen gas flow to inner part of molten and agglomerate of aluminum, formed in pre-heating zone. In $Al-N_{2}$-AlN system, AlN with a purity of 95% or ever can be prepared in the condition of $f_{Dil}\geq0.5$, $P_{N_{2}}\geq$ 1 MPa, and the purity can be elevated to 98% over in the condition of $f_{Dil}$ = 0.7 and $P_{N_{2}}$ = 10 MPa.