• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.2
• /
• pp.240-245
• /
• 2016

This paper describes the rheological behavior study such as viscosity and change of shear stress regarding marine lubricating oil according to the amount of Marine Gas Oil (MGO) dilution. The viscosity reduction due to fuel dilution is crucially important characteristic to decreasing engine durability because of the abrasion of piston ring or liner. The lubricating oil used in this paper was blended with magnetic stirrer diluted High Sulfur Diesel (HSD, 0.05 wt%) ratio of 3 %, 6 %, 10 %, 15 % and 20 %. The viscosity and shear stress of diluted lubricating oil were measured with the temperature range from $-10^{\circ}C$ to $80^{\circ}C$ using a rotary viscometer (Brookfield Viscometer). As the amount of MGO dilution increasing in lubricating oil, the viscosity and stress of those decreased, because the lubricating oil diluted MGO with low viscosity show the trends to decreased viscosity and shear stress. Especially, the viscosity and shear stress of lubricating oil radically decreased at low temperature ($0{\sim}-10^{\circ}C$) and doesn't effect in MGO dilution at over $40^{\circ}C$. As temperature risen, the reduction of the viscosity and shear stress in lubricating oil shows the Newtonian behavior. The lubricating oil was required to check up periodically to improve engine durability since the viscosity reduction by MGO dilution accelerating the engine abrasion.

• Journal of Yeungnam Medical Science
• /
• v.10 no.1
• /
• pp.135-143
• /
• 1993

The susceptibilities of 45 clinical isolates of bacteroides frogilis to cefaclor, ciproflxacin and imipenem were determined by new method, E-test (AB Bidisk, Solna, Sweden) and were compared with those from conventional agar dilution method by using brain heart infusion, Mueller-Hinton and Wilkins Chalgren agar plates. And the susceptibility of 60 clinical isolates of Bacteroides fragilis group (B. fragilis 45 strains, B. distasonis 6 strains, B. ovatus 5 strains, B. thetaiotaomicron 4 strains) to 5 quinolones (ciprofloxacin, enoxacin, norfloxacin, ofloxacin, pefloxacin) were determined by in vitro agar dilution method. Compared with agar dilution MICs for B. fragilis 45 strains, 90.3% of E-test MICs were within ${\pm}$1 dilution of the agar dilutions, and 98.4% were within 2 dilutions. And there were little effect of different medium bases to determine MICs except Mueller-Hinton agar. On Mueller-Hinton agar, B. fragilis showed have or no growth activity. In vitro susceptibility of B. fragjlis group to quinolones, most of the test strains showed resistant patterns to quinolones except ofloxacin and there was little difference of susceptibility patterns between species of B. fragilis group.

• Korean Journal of Poultry Science
• /
• v.44 no.1
• /
• pp.59-65
• /
• 2017

This study examined factors affecting the analysis of motility of chicken semen. The viability of spermatozoa was estimated using varying dilution ratios and supplementation with BSA or fatty acid free (FAF)-BSA as protein sources in semen diluent. Fresh semen was examined after preparing dilutions in beltsvile poultry semen extender (BPSE) of 1/8, 1/16 and 1/32 at $25^{\circ}C$. The motility of incubated semen at each dilution was observed at 3 min (89.9%, 69.9% and 53.2%), 30 min (86.7%, 71.4% and 51.7%), 1 h (89.5%, 74.0% and 53.5%) and 3 h (78.5%, 66.5% and 45.7%), respectively. The addition of BSA or FAF-BSA to BPSE diluent significantly increased the viability of semen in 1/32 dilution with results of 53.2% (control), 84.8% (BSA) and 92.9% (FAF-BSA) (p<0.05). This phenomenon was also observed in the dilution of frozen semen, where FAF-BSA treatment increased the viability of thawed semen from 17.6% to 34.0% in a 1/8 dilution (p<0.05). When the protein sources were used in the dilution, the survival rates of diluted chicken semen were also increased with time lapse. These results show that FAF-BSA may act to protect chicken semen and is suitable as a basic component of chicken semen diluent for the method of analyzing rooster semen after freezing.

• Journal of radiological science and technology
• /
• v.43 no.2
• /
• pp.97-103
• /
• 2020

This study was conducted by SPECT test at the Department of Nuclear Medicine at Daegu P Hospital from June 1 to October 31, 2019. A 3-way injection material was mounted among inpatients, and a syringe that was administered with radiopharmaceuticals using a ^99mTc labeled compound was secured. We tried to find a way to calculate the dose rate of each radiopharmaceutical and increase the dose rate. As a result of measuring the radioactivity of radio-pharmaceuticals using ^99mTc, the average dose rate of 60 syringes of all 6 radiopharmaceuticals was 93.26±7.34%, and the average dose rate of ^99mTc-DMSA was 77.72%, 15.54% lower than the total. As a way to increase the dosing rate, the average dose rate diluted twice with the remaining amount of syringe after administration using normal saline increased to 95.37±6.99%, and the average dose rate diluted three times increased to 96.32±6.86%. The corresponding sample t-test to compare the pre- and post-dose rates at 1 dilution and 2 and 3 dilutions. As a result of the dilution and 2 dilutions, the probability of significance was 0.013, which was significantly higher than the dilution(p<0.05). The probability of significance for dilution 1 and dilution 3 was 0.016, which was significantly higher than in one dilution(p<0.05). The sum of the average dose rate using the experimental 3-way line was the highest with 98.85±1.42% of ^99mTc, ^99mTc-ECD 98.82±1.26%, ^99mTc-Mebrofenin 98.82 ± 1.16%, ^99mTc-HDP 98.74 ± 1.91%, ^99mTc -MIBI was 98.69 ± 1.48%, and ^99mTc-DMSA was the lowest with 86.47 ± 4.74%. When the number of dilutions was 5 times using 0.5 cc of normal saline and when the number of dilutions was 5 times using 1 cc of normal saline, when the number of dilutions was 5 times using 0.5 cc of normal saline and 1 cc of nomal saline When the number of dilutions was 5 times and the syringe volume was 0.5 cc, there was a statistically significant difference (p<0.05). There was a statistically significant difference when the number of dilutions was 5 times using 1 cc of nomal saline and the number of dilutions was 5 times using 1 cc of normal saline, and the syringe volume was 0.5 cc (p<0.05).

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.1
• /
• pp.59-67
• /
• 2014

Purpose: The present study was aimed to compare the results of disinfection efficacy tested by membrane filtration method with dilution-neutralization method to develop the standard methods for evaluating disinfection efficacy of contact lens care products and to provide the result of disinfection efficacy of commercially available contact lens care products in domestic market. Methods: The results of disinfection efficacy against Staphylococcus aureus, Pseudomonas aeruginosa, Serratia marcescens, Candida albicans evaluated by membrane filtration method as a FDA standard and dilution-neutralization method as newly being a KFDA standard were compared and the disinfection efficacy of 16 multi-purpose solutions was further evaluated. Results: The disinfectants and contact lens care products having strong disinfection efficacy showed same results in both membrane filtration method and dilution-neutralization method. In case of contact lens care products having weak disinfection efficacy, the number of micro-organisms was not able to count since the colony was aggregated when evaluated by membrane filtration method. However, the number of micro-organisms was able to exactly count when evaluated by dilution-neutralization method. In addition, some commercially available contact lens care products did not meet disinfection standard and especially, their disinfection effect was often weak against Serratia marcescen and Candida albicans. Conclusions: It is concluded that dilution-neutralization method will be useful to evaluate disinfection efficacy since it is possible to count micro-organisms more precisely even with small amount of sample and check the results faster compared with membrane filtration method.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.1
• /
• pp.46-51
• /
• 2006

Phosphorus accumulation in fertilized soils becomes serious problem for agriculture and the environment. In this investigation, we conducted a laboratory scale investigation to find the most desirable displacement methods of the adsorbed phosphate onto the soil particle surfaces. Soil samples which contained high amount of phosphate were collected at two different depths (0-10 cm and 10-20 cm) from four locations at the moderate highland located in Nonsan, Chungnam. To observe the mobilization of solid-phase phosphate, soil samples were equilibrated with oxalic acid solutions ranging from $10^{-5}$ to $10^{-1}cmol\;L^{-1}$ with the dilution factors of 1:1, 1:2.5, 1:5, 1:10, and 1:20. The mineralized P sharply increased as the concentration of oxalic acid was greater than $5{\times}10^{-4}cmol\;L^{-1}$ under dilution factors of 1:1, 1:2.5, and 1:5. The breaking concentration of oxalic acid was lowered to $10^{-4}cmol\;L^{-1}$ and $5{\times}10^{-5}cmol\;L^{-1}$ for dilution factors of 1:10 and 1:20, respectively. The curve fit obtained from the graph can be described by exponential growth when the dilution factors were 1:1, 1:2.5, and 1:5 while the sigmoidal shape for 1:10 and 1:20, showing the mineralization of P were significantly dependent on the dilution factor.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.1
• /
• pp.62-69
• /
• 1998

To remove nitrogen from wastewater, ammonia nitrogen has to be oxidized to nitrate nitrogen before denitrification reaction which converts nitrate nitrogen to nitrogen gas. In order to understand nitrification, several mathematical models had been proposed and Monod type model has been accepted internationally. Since Monod type model consists of maximum substrate utilization rate, substrate concentration and half-saturation coefficient, these values have to be addressed before using Monod type model. Several experimental procedures to determine half-saturation coefficient have been developed, however, Infinite dilution method was known to be time saving procedure. In this study, the mathematical equations and experimantal procedures for Infinite dilution method are presented and this method is used to determine half-Saturation coefficient for nitrifying bacteria. As results, Infinite dilution method is proved that this coefficient can be determined within 8 hours and the values of half-saturation coefficient has a range of 0.728 and $0.455gNH_4{^+}-N/m^3$ and the average has $0.580gNH_4{^+}-N/m^3$ through 5 sets of experiments.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.426-429
• /
• 2001

The continuous production of L -proline was studied using L-histidine auxotrophic mutant of Corynebacterium acetoacidophilum under various substrate limited conditions. Among the $NH_4\;^+$ $PO_4\;^3$ and L -histidine limited conditions, the highest production of L -proline was observed under the L-histidine limited condition. Under $NH_4\;^+$ and $PO_4\;^3$ limited conditions, no or poor L-proline production was observed, respectively. For the kinetic parameters under L -histidine limitation the specific rate of L -proline production was increased with dilution rate upto $0.1hr^{-1}$ but decreased above $0.1hr^{-1}$. The volumetric rate of L -proline production was showed similar pattern with specific rate. The dried cell weight was gradually increased according to decrease the dilution rate. Specific rate of glucose consumption was proportionally increased with dilution rate. The results of continuous culture (higher production of L-proline at dilution rate $0.1hr^{-1}$) will be used in fed-batch culture for the control of cell growth rate and mass production of L-proline.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.5-8
• /
• 2005

Sound absorbing performance is affected by porosity and continuity of void, therefore it is important to maintain stabilization of foam and to analyze properties of void pore in hardened state. The purpose of this study is to analyze the sound absorption properties and void characteristic of foamed concrete according to dilution ratio of foaming agent. The results of this experiment were as follows. It is determined that an increase in total and continuous void ratio is achieved by increasing of dilution ratio, and a shorter absorbing time was exhibited at a higher continuous void ratio. When the average void size of foamed concrete was below 1.5mm, the tendency of sound absorption coefficient compared with general sound absorber was appeared similarly.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.4
• /
• pp.420-429
• /
• 2007

In this study, we attempted to evaluate the relationship between air dilution sensory test and instrumental detection method for individual odorous compound. For the purpose of our comparative study, we conducted the analysis of malodor on total of 46 samples collected from both industrial and food waste sectors using the two independent approaches. The results of instrumental analyses were explained after modification to several parameters such as: the sum of odor concentration (SOC), sum of odor quotient (SOQ) and sum of odor intensity (SOI). When we compared dilution ratio values (DRV) of threshold limit (TL) with the modified instrumental data sets, pearson coefficient of SOC, SOQ, and SOI were 0.556 (p=5.83E-05), 0.911 (p=9.64E-19) and 0.847 (p=8.93E-14), respectively. The results of this study thus suggest that the DRV of TL sensitively reflects odor strength measured intuitive.