• KIEAE Journal
• /
• 제8권1호
• /
• pp.53-60
• /
• 2008

The daylighting affects on the human biological cycles and physiological alterations. Daylighting is also an important element in visual comfort and it sometimes influences the quality of vision. Therefore the absence of natural light during the day brings contradictory result. To solve the problems of natural light lack and provide sufficient daylight in interior spaces, it might be necessary to apply some daylighting systems. One of these systems, light pipe system, which is simple, cheep and easily constructed, is very useful to apply for small buildings. The light pipe is simple means of directing daylighting (diffuse and direct lighting)into interior space. In order to application of light pipe system in Korea, it is necessary to optical data of light pipe system. This study aims to evaluate preliminary experiment of the daylighting environment of light pipe system. Light pipe system, that aspect ratio is 1:2(diameter and length), was installed in a windowless mock-up with $27m^2$. The mock-up model was constructed as a prototype of Korean office surface. Illuminance was measured with a Topcon IM-5 Luxmeter to evaluate the distribution of the illuminance on a floor. The indoor and outdoor illuminance and the internal/external illuminance ratio are compared to discuss with in the graphs. Luminance was measured with Radiant imaging Promertric 1400 that is digital photometer to evaluate the distribution of luminance on interior surface. The contrast of luminance is discussed with table and graphs.

• 한국전자통신학회논문지
• /
• 제13권2호
• /
• pp.435-442
• /
• 2018

본 논문에서는 FPGA를 기반으로 Camera Link (Medium)를 제공하는 PCB 패턴 검출 시스템을 구현하였다. 시스템 구현을 위해 비전 라이브러리를 IP로 구현하여 고속으로 패턴 매칭을 할 수 있도록 하였다. 구현된 IP는 영상입력용 카메라링크 IP, 히스토그램 IP, VGA 제어 IP, 수직투영 IP 및 수평투영 IP가 있다. 디지털 카메라에서 고속으로 전송되는 영상을 처리하기 위해 Xilinx사의 Virtex-5 계열의 FPGA 칩을 사용하였다. 그래버 시스템 구현을 위해 RISC 구조의 CPU인 MicroBlaze를 사용하였으며, PC와의 연동을 위해 PCI Express를 사용하였으며, 영상의 처리결과는 컴퓨터의 모니터와 7인치 LCD에 표현하였다.

• 방송공학회논문지
• /
• 제10권2호
• /
• pp.190-201
• /
• 2005

본 논문에서는 유${\cdot}$무선망의 결합, 방송${\cdot}$통신망의 융합 등의 환경에서 디지털 아이템의 생성, 분배, 소비 등과 관련된 MPEG-21 이벤트 리포팅 서비스를 제공하기 위한 시스템을 구현한다. MPEG-21 이벤트 리포팅은 MPEG-21 멀티미디어 프레임워크에서 피어와 사용자 간에 발생하는 이벤트에 대한 정보를 공유하기 위한 표준 통신 수단이다. 본 논문에서는 방송${\cdot}$통신 융합망에서 MPEG-21 이벤트 리포팅 서비스를 구현하기 위하여 IS0/1EC 21000-Part 15 규격을 준수하는 메시지 구조 및 시스템 구조를 설계하고, 이를 바탕으로 REL, IPMP, DIME 등 MPEG-21의 다른 요소 엔진과 연동 가능한 이벤트 리포팅 시스템을 구현한다.

• Journal of the Optical Society of Korea
• /
• 제17권2호
• /
• pp.188-199
• /
• 2013

This paper presents a novel algorithm for nighttime detection of the lane markers painted on a road at night. First of all, the proposed algorithm uses neighborhood average filtering, 8-directional Sobel operator and thresholding segmentation based on OTSU's to handle raw lane images taken from a digital CCD camera. Secondly, combining intensity map and gradient map, we analyze the distribution features of pixels on boundaries of lanes in the nighttime and construct 4 feature sets for these points, which are helpful to supply with sufficient data related to lane boundaries to detect lane markers much more robustly. Then, the searching method in multiple directions- horizontal, vertical and diagonal directions, is conducted to eliminate the noise points on lane boundaries. Adapted Hough transformation is utilized to obtain the feature parameters related to the lane edge. The proposed algorithm can not only significantly improve detection performance for the lane marker, but it requires less computational power. Finally, the algorithm is proved to be reliable and robust in lane detection in a nighttime scenario.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2006년도 학술대회 1부
• /
• pp.982-987
• /
• 2006

고전의 관현악기에서부터 현대의 각종 전자악기까지, 인류는 그 문화와 시대의 변화에 따라 다양한 형태의 악기를 개발하고 활용하였다. 최근에는 전기전자 기술의 발달로 다양한 센서와 프로그램을 활용해서 여러 가지 음색과 효과를 내는 악기가 개발되고 있다. 그 중에서 사람의 움직임을 직접 감지해서 음악적 도구로 활용하는 기술이 주목 받고 있다. 이를 위해 터치 센서(touch sensor), 비젼 센서(vision sensor), 자기장 센서(magnetic sensor), 초음파 센서(ultrasonic sensor) 등이 응용되고 있다. 그러나 지금까지의 센서 기술로는 사람의 움직임과 관련된 위치, 속도, 가속도 등에 대한 정보를 직접 추출하기가 어렵고, 구현된 시스템도 공간의 제약을 받거나 혹은 구현된 부피가 크거나 복잡한 구성형태를 지니고 있는 문제점이 있었다. 그래서 본 논문에서는 사람의 움직임과 관련된 가속도 정보를 직접 감지해서 새로운 형태의 악기로 활용될 수 있는 시스템을 연구하고 개발하였다. 이를 위해 6개의 가속도 정보를 처리하는 기술과 DSP(Digital Signal Processor) 활용 기술, Max/MSP 활용 기술이 응용 되었으며, 소형의 시스템을 개발하기 위해 시그널 컨디셔닝(signal conditioning) 회로와 DSP 보드를 자체 개발하였다. 실험을 통해 사람의 움직임과 관련된 각종 정보가 적절한 소프트웨어의 활용으로 다양한 음색의 변화는 물론 음높이, 음량의 변화까지도 제어할 수 있음을 확인하였고, 새로운 형태의 악기로써 무대 공연이나 노래방 등에 폭넓게 활용될 수 있는 가능성을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제46권6호
• /
• pp.869-886
• /
• 2013

This work presents an experimental methodology specially developed for the nonlinear large-amplitude free vibration analysis of a clamped-free thin-walled metal column under self-weight. The main contribution of this paper is related to the developed experimental methodology which is based on a remote sensing technique using a computer vision system that integrates, on-line, the digital image acquisition and its treatment through special image processing routines. The main importance of this methodology is that it performs large deflections measurements without making contact with the structure and thus, not introducing undesirable changes in its behavior, for instance, appreciable changes in mass and stiffness properties. This structure presents, in most cases, highly non-linear responses, which cannot be reproduced by conventional finite-element softwares due, mainly, to the simultaneous influence of geometric and inertial non-linearities. To capture the non-linearities associated with large amplitude vibration and be able to describe the buckling process, the structure is discretized as a sequence of jointed coupled elastic pendulums. The obtained numerical results are favorably compared with the experimental ones, in the pre- and post-buckling regimes.

• Smart Structures and Systems
• /
• 제24권5호
• /
• pp.649-657
• /
• 2019

Recently, an advanced video deflectometer based on the principle of off-axis digital image correlation was presented and advocated for remote and real-time deflection monitoring of large engineering structures. In engineering practice, measurement accuracy is one of the most important technical indicators of the video deflectometer. However, it has been observed in many outdoor experiments that data drift often presents in the measured deflection-time curves, which is caused by the instability of imaging system and the unavoidable influences of ambient interferences (e.g., ambient light changes, ambient temperature variations as well as ambient vibrations) in non-laboratory conditions. The non-ideal unstable imaging conditions seriously deteriorate the measurement accuracy of the video deflectometer. In this work, to perform high-accuracy deflection monitoring, potential sources for the drift error are analyzed, and a drift error model is established by considering these error sources. Based on this model, a simple, easy-to-implement yet effective reference point compensation method is proposed for real-time removal of the drift error in measured deflections. The practicality and effectiveness of the proposed method are demonstrated by in-situ deflection monitoring of railway and highway bridges.

• 디지털산업정보학회논문지
• /
• 제19권3호
• /
• pp.213-220
• /
• 2023

Face recognition is a very important process in video monitoring and is a type of biometric technology. It is mainly used for identification and security purposes, such as ID cards, licenses, and passports. The recognition process has many variables and is complex, so development has been slow. In this paper, we proposed a face recognition method using CNN, which has been re-examined due to the recent development of computers and algorithms, and compared with the feature comparison method, which is an existing face recognition algorithm, to verify performance. The proposed face search method is divided into a face region extraction step and a learning step. For learning, face images were standardized to 50×50 pixels, and learning was conducted while minimizing unnecessary nodes. In this paper, convolution and polling-based techniques, which are one of the deep learning technologies, were used for learning, and 1,000 face images were randomly selected from among 7,000 images of Caltech, and as a result of inspection, the final recognition rate was 98%.

• 한국운동역학회지
• /
• 제24권2호
• /
• pp.181-187
• /
• 2014

In this study, a real-time evaluation system for quantitative dynamic fitting during pedaling was developed. The system is consisted of LED markers, a digital camera connected to a computer and a marker detecting program. LED markers are attached to hip, knee, ankle joint and fifth metatarsal in the sagittal plane. Playstation3 eye which is selected as a main digital camera in this paper has many merits for using motion capture, such as high FPS (Frame per second) about 180FPS, $320{\times}240$ resolution, and low-cost with easy to use. The maker detecting program was made by using Labview2010 with Vision builder. The program was made up of three parts, image acquisition & processing, marker detection & joint angle calculation, and output section. The digital camera's image was acquired in 95FPS, and the program was set-up to measure the lower-joint angle in real-time, providing the user as a graph, and allowing to save it as a test file. The system was verified by pedalling at three saddle heights (knee angle: 25, 35, $45^{\circ}$) and three cadences (30, 60, 90 rpm) at each saddle heights by using Holmes method, a method of measuring lower limbs angle, to determine the saddle height. The result has shown low average error and strong correlation of the system, respectively, $1.18{\pm}0.44^{\circ}$, $0.99{\pm}0.01^{\circ}$. There was little error due to the changes in the saddle height but absolute error occurred by cadence. Considering the average error is approximately $1^{\circ}$, it is a suitable system for quantitative dynamic fitting evaluation. It is necessary to decrease error by using two digital camera with frontal and sagittal plane in future study.

• 한국콘텐츠학회논문지
• /
• 제1권1호
• /
• pp.74-82
• /
• 2001

시각암호는 정보보호 분야에서 중요한 정보를 암호화하여 복수 회원에게 분산시킨 후 회원의 합의에 의하여 해독이 가능하게 하는 thresholding scheme을 디지털 시스템인 아닌 인간의 시각 시스템으로 복호가 가능하게 하였다. 그러나 이러한 방법은 표현의 한계로 인하여 몇 가지 문제점을 안고 있었다. 이후 인간의 시각을 대신하여 레이저를 사용하는 광시각암호가 제안되어 광학 시스템에 암호 기법을 적용할 수 있게 되었다. 그러나 이 시스템은 기존의 시각 암호의 문제점을 완전히 극복하지 못함으로 인하여 또 다른 문제를 발생하였다. 이것은 데이터 처리 시스템을 시각에서 광학으로 전환하는 과정에서 발생하기 때문에 문제의 분석과 해결 역시 광학적으로 접근하는 것이 타당하다. 본 논문에서는 상관기를 이용하여 광시각 암호의 처리에서 발생하는 잡음의 정도와 암호 특성을 주파수 관점에서 분석한다.