• 디지털콘텐츠학회 논문지
• /
• 제1권1호
• /
• pp.103-110
• /
• 2000

멀티미디어와 인터넷으로 대표되는 새로운 기술들의 출현과 발전은 지식과 정보의 처리, 기록, 전달 및 전승 측면에서 과거와는 전혀 다른 획기적인 변화를 가져왔다. 첨단 시대의 기술들은 지식과 정보를 전달함에 있어서 효과를 제고할 수 있도록 인간의 여러 감각기관에 동시에 호소할 수 있어야 할 것이다. 본 논문은 지식과 정보를 가공함에 있어서 멀티미디어 및 인터넷 기술을 비롯하여 그 동안 축적되었던 컴퓨터 기술을 효율적으로 사용하여 보다 효과적인 "디지털 컨텐츠"를 개발하는 데 그 초점을 두고 있다. 디지털 콘텐츠의 주요 개발 방향으로 상호작용성 기능, 시각화/청각화 기능, 구조화된 내용을 제공하는 기능 및 자기 보폭에 맞는 습득 기능을 서술하였고, 각각의 기능에 대하여 구현된 모듈들을 제시하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1155-1160
• /
• 2011

The importance of broadband wireless communication implemented at subway tunnels is growing up. At 18GHz wireless video transmission system, the transmitter requires a digital modulation method. At subway tunnel, A 18GHz's influence of the multi-pass padding is strong. OFDM digital modulation that is strong for multi-pass padding is recommended. Duplexing methode uses FDD to transmit and receive broadband data at the same time. In the case of FDD we assign a private use channel each with the transmission at the receiving. In this paper, We implement multiple access wireless OFDM transceiver. We verified that one ground transceiver communicates with two car transceiver at the same time.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1008-1013
• /
• 2011

The importance of broadband wireless communication system at subway tunnels is growing up. At 18GHz wireless video transmission system, the transmitter requires a digital modulation method. At subway tunnel, A 18GHz's influence of the multi-pass padding is strong. OFDM digital modulation that is strong for multi-pass padding is recommended. Duplexing methode uses FDD to transmit and receive broadband data at the same time. In the case of FDD we assign a private use channel each with the transmission at the receiving. In this paper, We implement multiple access wireless OFDM transceiver. We verified that one ground transceiver communicates with two car transceiver at the same time.

• 한국콘텐츠학회논문지
• /
• 제6권12호
• /
• pp.96-104
• /
• 2006

본 연구에서는, 심전도 송수신 장치의 개발을 위한 지그비(Zigbee) 기반 무선 센서 모듈과 PDA(Personal Digital Assistant)의 데이터 전송률과 전력 소비에 대하여 분석 하였다. 데이터 전송률은 패킷(Packet) 구조에 의존적이며, 패킷을 2개의 심전도 데이터와 1개의 3축 가속도 벡터로 구성하였을 때, 초당 300 샘플의 전송률을 나타내었다. 두 개의 AAA 전지를 직렬로 연결하여, 센서 모듈의 동작 시간은 평균적으로 28시간 이었다. PDA의 전력 소비는 화면의 ON/OFF 여부와 시리얼 포트의 사용 여부 및 패턴에 의존적임을 알 수 있었다. 이러한 응용에서, PDA 동작 시간은 평균적으로 5시간 정도임을 확인하였으며, 이때, PDA는 논 블로킹 모드로 시리얼 포트로부터 전송된 데이터를 수신 한다. 결론적으로, 본 연구에서 개발된 장치를 24 시간 홀터(Holter) 심전계로 응용할 경우, 센서 모듈의 전력 소비와 전송 속도에는 문제가 없었으나, PDA는 전력 소모율에 문제가 있으며 이는 해결되어야할 과제이다.

• 디지털산업정보학회논문지
• /
• 제4권4호
• /
• pp.1-8
• /
• 2008

The USN is important in technique, unmanned observation using wireless network camera, detection technique that use intrusion detection sensor. But these encrypted data transmission and processing technique through sensor network, method of the staff's location recognition and arrangement aren't serviced still as a integrated system in facility security industry. This paper proposed that improve facility management, the staff present recognition and system efficiency using RFID, USN and wireless camera.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 컴퓨터소사이어티 추계학술대회논문집
• /
• pp.251-254
• /
• 2003

DMB is a next-generation multimedia broadcasting system that not only enables digital broadcasting services such as transmission of CD-duality audio, traffic information, and real-time stock information, but also allows reception of high-quality digital TV in high-speed driving conditions. In the DMB system, MPEG-2 TS(Transport Stream) multiplex method and MPEG-4 System SL(Sync Layer) have been selected as the delivery layer. In this paper, an efficient interface scheme between an MPEG-2 TS processing hardware and software-implemented MPEG-4 system within a DMB terminal device is proposed.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.71-81
• /
• 2001

This paper analyzes the effectiveness of minimizing vibration and sound transmission on/through a thin rectangular plate by both feedback control and hybrid control which combines adaptive feedforward control with a feedback loop. An experimental system identification technique using the matrix-fractional curve-fitting of the frequency response data is introduced for complex shaped structures. This identification technique reduces the model order o the MIMO(Multi-Input Multi-Output) system which simplifies the practical implementation. The adaptive feedforward control uses a Multiple filtered-x LMS(Least Mean Square) algorithm and the feedback control uses a multivariable digital LQG(Linear Quadratic Gaussian) algorithm. Experimental results show that an effective reduction of sound transmission is achieved by the hybrid control scheme when both vibration and noise measurement signals are incorporated in the controller.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권10호
• /
• pp.593-601
• /
• 2003

Distance realy is tripped by the line impedance calculated at the relay point. Accordingly the accurate operation depends on the precise calculation of line impedance. Impedance can be accurately calculated in case of overhead line. However, in case of power cables or combined transmission lines, impedance can not be accurately calculated because cable systems have the sheath, grounding resistance, and sheath voltage limiters(SVLs). There are also several grounding systems in cable systems. Therefore, if there is a fault in cable systems, these terms will severely be caused much error to calculation of impedance. Accordingly the proper compensation should be developed for the correct operation of the distance relay. This paper presents the distance calculating algorithm in combined transmission line with power cable using wavelet transform. In order to achieve such purpose, judgement method to discriminate the fault section in both sections was proposed using D1 coefficient summation in db4. And also, error compensation value was proposed for correct calculation of impedance in power cables section.

• Journal of Advanced Marine Engineering and Technology
• /
• 제11권1호
• /
• pp.63-71
• /
• 1987

The measuring of acoustic intensity has been investigated by many researchers and practicians during the last several decades. But due to the lack of measurement accuracy, they have had no practical use. In recent years, the two microphone acoustic intensity method has been developed by the advancement of FFT analysis technique and the digital data processing equipment. This new method of using two microphones gives informations on the noise source survey and the acoustic power of sound radiation source without the anechoic room. In this paper, theoretical formulae for the two microphone acoustic intensity method and the sound transmission loss are checked. The obtained results for the acoustical enclosure of gas heat pump were compared with the classical field incidence mass law. The surface vibration modes for a panel of enclosure were also estimated.

• 대한전기학회논문지
• /
• 제33권10호
• /
• pp.410-422
• /
• 1984

This paper presents a new practical method for optimal active and reactive power control for the economic operation in electrical power system, and the programs are developed for digital computer solution. The major features and techniques of this paper are as follows: 1) The method is presented for finding the equivalent active power balance equation applying the sparse Jacobian matrix of power flow equation instead of using B constant as active power balance equation considering transmission loss, and thus for determining directly optimal active power allocation berween generator unitw satisfying the equality and inequality constraints. 2) The method is proposed for solving directly the optimum economim dispatch problem without using gradient method and penalty function for both active and reactive power control. As a result, the computing time are reduced and convergence characteristic is remarkably improved. 3) Unlike most of conventional methods which adopt the transmission loss as a objective function for reactive power control, the total fuel cost of themal power plant is adopted as objective function for both active and reactive power control. consequently, more reasonable and economic profit can be achieved.