• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.261-266
• /
• 2017

This study describes the design and implementation of SHF band Upconverter Digital Satellite Communication. The SHF band Upconverter unit consists of PLDROand frequency converter. In frequency converter, microstripBPF and LPF designed through the pre EMsimulation are implemented to minimize the unwanted spurious in frequency converter. Through the pre-simulation analysis ofspace environment, the possibility of and minimized about the malfunction of equipment and we designed a reliable SHF band Upconverter through simulation for a TID according to the vibration generated during the launch and space radiation environment, and compared pre-simulation of main performance results to test results about main performances of SHF band Upconverter after production.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.494-499
• /
• 2008

In this study, a Software Defined Radio(SDR) technology-based digital filtering technique applicable to a multiple channel processing system such as a wireless mobile communication system using Code Division Multiple Access(CDMA) technology is proposed. The technique includes a micro-processor to redesign Finite Impulse Response(FIR) filter coefficients according to specific system information and to download the filter coefficients to one digital Band Pass Filter(BPF) to reconfigure another system. The feasibility of the algorithm is verified by implementing a multiple channel signal generator that is reconfigurable to other system profiles, including those for a CDMA system and a WCDMA system on identical hardware platform.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.586-590
• /
• 2001

In this paper, a novel control scheme compensating source voltage unbalance and harmonic currents for hybrid active power filters is proposed, where no low/high-pass filters are used in compensation voltage composition. The phase angle and compensation voltages for source harmonic current and unbalanced voltage components are derived from the positive sequence component of the unbalanced voltage set, which is simply obtained by using digital all-pass filters. Since a balanced set of the source voltage obtained by scaling the positive sequence components is used as reference values for source current and load voltage, it is possible to eliminate the necessity of low/high-pass filters in the reference generation. Therefore the control algorithm is much simpler and gives more stable performance than the conventional method. In addition, the source harmonic current is eliminated by compensating for the harmonic voltage of the load side added to feedback control of the fundamental component.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.800-802
• /
• 1999

본 논문에서는 기존의 알고리즘에서 벗어나 새로이 제안된 유전자 알고리즘을 이용하여 디지털 필터를 설계하는데 목적이 있다. 이 방법은 아날로그 필터에서 디지털 필터로의 전환이 불필요하며, 기존의 디지털 필터 설계방법과는 달리 저역통과(low-pass), 고역통과(high-pass), 대역통과(band-pass), 대역소거(band-stop) 필터와 같은 주파수 선택별 필터를 각각 독립적으로 설계 가능하게 하고, 이에 따른 계산 손실을 줄일 수 있다. 유전자 알고리즘을 사용하는데 있어 적합도 함수는 주파수 응답 크기를 이용한다. 실제로 주파수 응답특성과 디지털 필터의 계수와는 밀접한 관계가 있으므로, 원하는 필터의 주파수응답특성을 통해, 디지털 필터의 계수를 최적화 한다. 또한 필터계수 최적화 과정에 있어, 선택, 교배, 돌연변이와 같은 유전 연산자 적용시 필터의 계수들은 각각 안정도가 보장되어지는 범위내에서 선택되게 한다. 디지털 필터를 설계한 후 기존의 방법과 새로이 제안된 방법의 성능을 비교 평가 한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.3
• /
• pp.575-591
• /
• 2011

We present a novel active contour-based two-pass approach to extract smooth feature regions from a triangular mesh. In the first pass, an active contour formulated in level-set surfaces is devised to extract feature regions with rough boundaries. In the second pass, the rough boundary curve is smoothed by minimizing internal energy, which is derived from its curvature. The separation of the extraction and smoothing process enables us to extract feature regions with smooth boundaries from a triangular mesh without user's initial model. Furthermore, smooth feature curves can also be obtained by skeletonizing the smooth feature regions. We tested our algorithm on facial models and proved its excellence.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.1011-1015
• /
• 2005

Fully digital controlled 20-bit magnet power supplies have been developed and successfully tested for closed orbit correction of PLS(Pohang Light Source). The new digital power supply has used fiber optics for 25kHz switching of IGBT drivers, and implemented DSP, ADC, Interlock, DCCT cards in a compact 3U-sized 19" chassis. Input/Output low-pass filters suppress harmonics of 60Hz line frequency and switching frequency noise effectively. Overall performance of the power supplies have been demonstrated as +/- 2ppm short-term stability(<1 min), and +/- 10ppm long-term stability(<36 hours). All the existing 12-bit 70 power supplies for vertical correction magnets will be replaced with new digital power supplies during 2005 summer shutdown period. In this paper, we will describe the hardware structure and control method of the digital power supply and the experimental results will be shown.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.5
• /
• pp.658-665
• /
• 2011

In the present paper, a novel fast peak detector for single- or three-phase unsymmetrical voltage sags is proposed. The proposed detector is modified from a single-phase digital phase-locked loop based on a d-q transformation using an all-pass filter (APF). APF generates a virtual phase with $90^{\circ}$ phase delay. However, this virtual phase cannot reflect a sudden change of the grid voltage in the moment of voltage sag, which causes a peak value to be significantly distorted and to settle down slowly. Specifically, the settling time of the peak value is too long when voltage sag occurs around a zero crossing, such as phase $0^{\circ}$ and $180^{\circ}$. This paper describes the operating principle of the APF problem and proposes a modified all-pass filter (MAPF) to mitigate the inherent APF problem. In addition, a new fast peak detector using MAPF is proposed. The proposed detector is able to calculate a peak value within 0.5 ms, even when voltage sag occurs around zero crossing. The proposed fast peak detector is compared with the conventional detector using APF. Results show that the proposed detector has faster detection time in the whole phase range. Furthermore, the proposed fast peak detector can be effectively applied to unsymmetrical three-phase voltage sags. Simulation and experimental results verify the advantages of the proposed detector and MAPF.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.98-99
• /
• 2023

In the maritime digital forensic part, it is very important and difficult process that analysis of data and information with vessel navigation system's binary log data for situation awareness of maritime accident. In recent years, analysis of vessel's navigation system's trajectory information is an essential element of maritime accident investigation. So, we made an experiment about corruption with various memory device in navigation system. The analysis of corruption test in seawater give us important information about the valid pulling time of sunken ship for acquirement useful trajectory information.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.44-48
• /
• 2002

This paper describes an adaptive signal processing of digital receiver with DDC(Digital Down Convertor), DDC is implemented by using NCO(Numerically Controlled Oscillator), digital low pass filter. for the passband sampling, we present the results of digital receiver simulation with DDC. We confirm that the low IP signal is converted to zero IF by DDC. DOA(Direction Of Arrival) estimation technique using MUSIC(Multiple SIgnal Classification) algorithm with high resolution is presented. We Cow that an accurate resolution of DOA depends on the input sampling number.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.1
• /
• pp.1-9
• /
• 1994

In general, when IIR digital filter are designed from analog filters, the bilinera transformation and the impluse invariant tramsformation are commonly used. It is known, however, that high frequency response of digital filters designed by these transformations can not be well approximated to the sampled analog signals. In this paper, the symbol pulse invariant transformation is analyzed theoretically so that the symbol pulse invariant transformation which was originally application to a rectangular pulse is newly applied to double rate pulse signals and generic shape pulse signals. Also, the relation of spectra between a transfer function of digital filter and one of analog filter is considered. Further, we apply to design the digital high pass filters using the symbol pulse invariant transformation method.