• 제목/요약/키워드: Digital oscilloscope

검색결과 66건 처리시간 0.022초

가스 혼합물의 폭발압력과 연소열의 상관관계 연구 (A Study on the Relationship of Explosion Characteristics and Combustion Heat of Gas Mixtures)

  • 오규형;김홍;유주현;김태진
    • 한국가스학회지
    • /
    • 제1권1호
    • /
    • pp.49-55
    • /
    • 1997
  • 폭발압력은 가연성 혼합가스의 폭발시 발생되는 에너지의 변환형태로 가스폭발 사고시 구조물의 파괴와 피해는 주로 폭발압력과 열에 의해 발생한다. 본 연구에서는 몇 종류의 탄화수소와 산소의 혼합물에 대하여 폭발특성과 폭발연소시 발생되는 에너지와의 관계를 규명하고자 하였다. 폭발실험 용기는 L/D가 1이고 부피가 $5916cm^3$인 원주형 용기를 사용하였으며 폭발압력은 strain형 압력센서를 사용하여 오실로스코프로 측정하였다. 실험에 사용된 탄화수소는 메탄, 에틸렌, 프로판, 부탄이었으며 실험의 변수로는 산화제인 산소와의 혼합기의 농도 변화이었다. 실험결과 폭발압력은 연소열에 강한 의존성을 갖고 있음을 알 수 있었으며 이 관계를 이용하여 연소특성으로부터 폭발압력의 예측이 가능할 것으로 생각된다.

  • PDF

전압파형을 이용한 트래킹 진전과정 분석방법에 관한 연구 (A Study on the Analysis Method of Tracking Process using Voltage Waveforms)

  • 지승욱;이춘하;윤대희;송현직;심광열;박원주;이광식
    • 조명전기설비학회논문지
    • /
    • 제20권8호
    • /
    • pp.30-35
    • /
    • 2006
  • 고전기 전자 측정에서 가장 쉽고 정확하게 측정할 수 있는 것이 전압이다. 그래서 우리는 단지 전압만으로 트래킹의 진전과정을 알 수 있는 방법을 연구하였고, 이를 분할-FFT(Partition-FFT)라고 명명하였다. 트래킹은 IEC 60112에서 제안하는 방법과 시험 장비로 모의하였다. 이 때 얻은 전압파형을 분할-FFT로 분석하였고, 그 결과 정상상태에서 트래킹이 일어나기까지의 과정을 6단계로 명확히 구분할 수 있었다. 트래킹 현상은 전기재해의 주요 원인 중 하나이다. 분할-FFT는 오실로스코프와 컴퓨터 소프트웨어에만 의존한다. 따라서 기존의 전기설비에 분할-FFT를 적용한다면 적은 비용과 쉬운 측정으로 트래킹으로 인한 전기재해를 방지할 수 있다. 무엇보다도 분할-FFT는 트래킹 진전과정을 시각적으로 표현해 주기 때문에 일반인들도 쉽게 전기재해 발생 가능성을 판별해 낼 수 있을 것이다.

미고결 해저퇴적물의 음파전달속도 측정에 관한 연구 (Laboratory Determination of Compressional wave Velocity for Unconsolidated Marine Sediment)

  • 김대철
    • 한국수산과학회지
    • /
    • 제22권3호
    • /
    • pp.147-153
    • /
    • 1989
  • 부산항 부근에서 피스톤식 시추기로 채취된 2개의 세려질 현생퇴적물코어에 대한 음파전달속도와 다른 물리적, 퇴적학적 특성이 측정되었다. 본 연구를 위해 특별히 제작된 실험 보조장치는 성공적으로 작동하였으며, 전통적인 속도측정방법인 수은기둥을 이용한 방법과 디지탈 오씰로스코우프를 이용한 시간차 방법 모두의 측정값이 측정오차 한계인 $1\~2\%$ 이내인 것으로 확인됨으로써 어느 방법이라도 미고결 해저퇴적물의 속도측정에 이용될 수 있음이 증명되었다. 코어에서 직접 측정된 음파전달속도는 약1.540-1.635km/s로서 바로 인접지역에서 탄성파를 이용하여 간접적인 방법으로 계산된 수치인 1.480-1.540km/s 보다 약 $4\~6\%$ 정도 더 빠른 것으로 나타났다. 이러한 차이는 직접측정의 측정오차 한계인 $2\%$를 훨씬 능가하는 것으로 2가지 상이한 측정방법의 근본적인 차이점에 기인한다고 볼 수 있다. 이러한 결과는 기존 탄성파 자료뿐만 아니라 장래에 수행할 각종 해상 탄성파 탐사시 층후계산에 필수적으로 고려해야 할 사항으로서 중요성을 내포한다.

  • PDF

광전계 센서(optical electric field sensor)를 이용한 GPR (GPR using optical electric field sensor)

  • 조성준;;;김정호
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2005년도 공동학술대회 논문집
    • /
    • pp.215-220
    • /
    • 2005
  • 지뢰탐지에 효과적으로 적용하기 위해 광전계 센서를 이용한 GPR 시스템을 개발하였다. 측정되는 전기장의 왜곡을 최소화 하는 광전계 센서는 크기와 무게가 매우 적어 측정 장치로 운용하기가 용이하므로 지뢰탐지와 같이 세밀한 주의가 요구되는 곳에 적합하다. 송수신 장치 역할을 하는 벡터 네트웍 분석기와 광신호 발생기와 광검파기를 탑재한 광변조기, double ridge horn 송신 안테나와 광전계 센서로 구성된 stepped frequency radar 시스템이 개발되었으며, 이 시스템의 매우 긴 측정시간의 단점을 극복하기 위해 동일한 수준의 S/N 비를 가지는, 임펄스 발생기와 오실로스코프로 구성된 impulse radar 시스템이 또한 개발되었다. 비교 결과 자료 수준은 거의 동일하나 측정시간은 스텝 측정의 경우 8배 이상 빨라진 것을 알 수 있었으며, 동일한 자료를 연속 측정으로 획득한 결과 100 배 이상 빨라 질 수 있음을 확인하였다. 또한 이 임펄스 레이다 시스템을 PMN2 지뢰모형에 대해 현장과 비슷한 환경에서의 실험실 실험에 적용하여 지뢰모형의 영상을 획득하였다.

  • PDF

초광대역 임펄스를 이용한 고해상도 지반탐사 이미지 레이더 (High resolution groud penetrating image radar using an ultra wideband (UWB) impulse waveform)

  • 박영진;김관호;이원태
    • 대한전자공학회논문지TC
    • /
    • 제42권11호
    • /
    • pp.101-106
    • /
    • 2005
  • 초광대역 임펄스를 이용한 비파괴 지중 금속 매설물 탐지용 지반 탐사 레이더(Ground penetrating image radar:GPR)를 개발하였다. 탐사 지면의 상대 유전율을 측정하였고, 최대 탐사 깊이 1m 이내의 측정이 가능하도록 시스템을 설계하였다. 전체 경로 감쇄, 시스템의 크기, 해상도를 고려하여 최고 주파수 및 최저 주파수를 선택하였다. 선택된 주파수에 맞는 1 나노세컨더(ns) 이하의 상승 시간을 갖는 초광대역 임펄스를 선택하였으며, 사용한 임펄스의 주파수 범위를 고려하여 소형 평판형 초광대역 다이폴 안테나를 설계하였다. 또한, 지중으로부터 반사되는 신호를 수신하기 위해서 디지털 오실로스코프를 사용하였다. 측정은 monostatic 방식과 마이그레이션(migration) 기법을 사용하였다. 지중 매설물의 영상 처리를 위해서는 A-scan 및 B-scan 평균 제거 방식을 사용하였다. 개발된 시스템은 금속 물체와 비금속 물체가 매설된 실증 시험장에서 시험되었고, 수 센티미터 직경의 작은 지중 금속 매설물까지도 탐지할 수 있는 우수한 성능을 가짐을 보였다.

광계측 시스템을 이용한 유.기중 코로나 방전의 전계변화 측정 및 비교분석 (Analysis and the measurement of the variation of electric field in air and oil using optical measuring system)

  • 마지훈;류철휘;강원종;장용무;구자윤
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 C
    • /
    • pp.1668-1670
    • /
    • 2002
  • Since more than two decades, the conventional PD detecting systems have been employed in order to detect the partial discharges occurring inside the HV power apparatus for their diagnosis by use of different type of detection such as acoustic and UHF detection method. Regardless of their wide on-site application, a certain number of technical inconveniences have been disclosed as follows : multistage amplification. large volume, susceptible to external noise and high price. In this respect, the optical measurement techniques are widely proposed in these days in this concerned field ascribed to the following advantages : immune to external EMI noise and broad band response of the Pockels cell covering from DC to GHz. However, the reliability of several proposed techniques enabling to measure the electric field inside the large high power apparatus has not yet been well approved In this work, an optical measuring system, based on the Pockels effect, has been developed for measuring the field variation due to the corona discharges occurring in air and in oil. This system consists of He-Ne laser, single mode optical fiber, multi mode optical fiber, polarizing film, Y-cut LiNbO3 cell, photo detector, digital oscilloscope and personal computer with GPIB. For this purpose, optical probe has been specially designed and realized and put into the needle-plane electrode. Afterward, same measurement is carried out in oil. We demonstrate the characteristic of the optical measuring system and the measurement results.

  • PDF

시간-주파수 영역 반사파 계측방법을 이용한 부하 저항 측정 시스템 구현 (The Implementation of Load Resistance Measurement System using Time-Frequency Domain Reflectometry)

  • 곽기석;박태근;윤태성;박진배
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제55권10호
    • /
    • pp.435-442
    • /
    • 2006
  • One of the most important topics about the safety of electrical and electronic system is the reliability of the wiring system. The Time-Frequency Domain Reflectometry(TFDR) is a state-of-the-art system for detecting and estimating of the fault on a wiring. In this paper, We've considered the load resistance measurement on a coaxial cable using TFDR in a way of expanded application. The TFDR system was built using commercial Pci extensions for Instrumentation(PXI) and LabVIEW. The proposed real time TFDR system consisted of the reference signal design, signal generation, signal acquisition, algorithm execution and results display part. To implement real time system, all of the parts were programmed by the LabVIEW which is one of the graphical programming languages. Using the application software implemented by the LabVIEW, we were able to design a proper reference signal which is suitable for target cable and control not only the arbitrary waveform generator in the signal generation part but alto the digital storage oscilloscope in the signal acquisition part. By using the TFDR real time system with the terminal resistor on the target cable, we carried out load impedance measurement experiments. The experimental results showed that the proposed system are able not only to detect the location of impedance discontinuity on the cable but also to estimate the load resistance with high accuracy.

가스절연기기(GIS)의 인위적 결함에 의한 부분방전의 검출을 위한 Probe-Type Pockels Sensor의 적용 가능성 (A possible application of the partial discharge measurement due to artificial defect using Pockets sensor in GIS(Gas Insulated Switchgear))

  • 류철휘;이재호;마지훈;강원종;장용무;구자윤
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 C
    • /
    • pp.1770-1772
    • /
    • 2003
  • 본 연구는 국내에서 최초로 제안되고 적용가능성이 입증되어 설계, 제작된 Probe-type Pockets sensor(HY-Pockets Sensor)를 GIS등의 고전압 장비들에 응용한 레이저 부분방전 진단 시스템 개발을 목표로 하고 있다. 이러한 목적으로, 170kV 급 실 규모 GIS내부의 전류 도체에 다양한 곡률 반경의 침 전극을 부착시켜 부분 방전에 기인된 불평등 전계를 형성시켜 개발된 센서의 실규모 적용 가능성을 고찰하였다. 본 레이저 계측 시스템은 He-Ne laser, single multi-mode optical fiber, $2{\times}2$ 50/50 laser to single mode fiber coupler, probe-type Pockets sensor, photo detector 등으로 구성하여 레이저의 진행을 유도하고, 신호의 특성을 분석하였다. probe-type Pockets sensor로부터 의 출력 신호는 photo detector를 통해 전기적 신호로 변환되어 digital oscilloscope에 의해 측정되고, 또한 PC를 통해 데이터의 저장과 통계적, 분석적 처리 과정을 수행하게 된다. 본 연구의 결과로서 부분방전원에서 생성된 방전 신호에 대한 거리에 따른 센서 감도 결정, 그에 대한 센서 감도의 보정 향상, 전계의 세기의 변화에 따른 센서의 선형성 등이 도출되었고, 이러한 실험결과를 통해 실 GIS(170kv급) 내부에서 발생하는 부분방전의 검출에 본 레이저 부분방전 진단 시스템의 적용 가능성이 제시 되었다.

  • PDF

타격조건에 따른 수박의 음파특성 (Acoustic Characteristics of Watermelon According to Impact Conditions)

  • 최동수;최규홍;이영희;이강진;김만수
    • Journal of Biosystems Engineering
    • /
    • 제27권1호
    • /
    • pp.67-76
    • /
    • 2002
  • This study was conducted to investigate the effects of impact conditions on the acoustic characteristics of a watermelon. The study was crucial to develop a device for nondestructive internal quality evaluation of a watermelon by an acoustic impulse response method. An impact device was constructed with a pendulum to hit the watermelon, a microphone to detect the acoustic impulse responses, and a digital oscilloscope and computer to store and analyze the data. The selected samples were Guemcheon cultivar watermelons(Citrulus Vulgaris Schrad) harvested on Oct. 20,1998. Sixty watermelons were tested on flour different types of sample holders, with four kinds of ball made of different materials, at four bevels of the angular position of the pendulum and distance from the watermelon to the microphone. Since the magnitudes of frequencies obtained by hitting with the steel and rubber ball were relatively small at the bandwidths of above 500 Hz, it was shown that the steel and rubber ball were not suitable far a hitting ball in the pendulum to get informations on internal quality of the watermelon. In case of using broth of the wood and acryl ball, almost the same and good acoustic responses were shown on the wide range of frequency bandwidth. Therefore, it seemed that the acryl ball was more suitable to the test than the wood ball in considering its mechanical properties. The acoustic characteristics of the watermelon were not shown a significant difference between the types of sample holder. The amplitudes of the acoustic signals and the magnitudes of frequencies from the whole samples increased with increase of the angular position of pendulum and with decrease of the distance from the watermelon to the microphone. However, the resonance resonance of the sample were almost the same regardless of the angular positions and the distances.

시영역에서 임펄스 레이더 시스템의 실험적 구현 (Implementation of Impulse Radar System in Time Domain within Laboratory Unit)

  • 이두진
    • 한국정보전자통신기술학회논문지
    • /
    • 제17권2호
    • /
    • pp.93-98
    • /
    • 2024
  • 본 논문에서는 근거리에 존재하는 타겟의 거리 정보를 탐지할 수 있는 간단한 구조를 제안하고 직관적으로 시영역에서 초광대역 신호를 추출하는 방법에 대해 기술하였다. 제안된 임펄스 레이더 시스템은 임펄스 발생회로, 초광대역 송수신 안테나 및 함수 발생기, 디지털 오실로스코프로 구성된다. 10MHz의 정현파를 입력 신호로 인가하였을 때 발생되는 신호의 펄스폭은 200ps 및 주파수영역에서 0.3GHz에서 4.7GHz의 대역을 점유하는 일차 미분된 가우시안 펄스임을 측정을 통해 확인하였다. 동일한 초광대역 송수신 안테나를 활용하여 수신하였을 때 신호는 펄스폭이 328ps 및 스펙트럼은 0.9GHz에서 4.4GHz의 대역을 점유하는 가우시안 더블릿의 형태의 초광대역 신호로 측정되었다. 반경 4cm 정도의 원형 금속 물질과 코너 리플렉터를 타겟으로하여 일정 거리 만큼 이격하였을 때 실 타겟의 위치정보를 추출함을 실험을 통해 확인하였다.