• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.155-158
• /
• 2005

An invesitigation on power consumption of a mobile multimedia system using OFDM and MDVS technique is reported here. Analysis and simulation are performed to find the significances of proposed Microscopic Dynamic Voltage Scaling(MDVS) tehnique[4] on digital processor in terms of power saving. A study is also made to show power reduction in mobile multimedia system by incorporating OFDM modulation scheme in RF front-end. Finally, overall power consumption by functionally distinguished blocks ie. RF front-end, digital processor and human interface unit is shown here. Total power consumption is 8.2W for 2Mbps SD-quality WCDMA multimedia video service - the power consumption of digital processor is 3.9W(48%), the power consumption of RF front-end is 3.2W (36%), and the power consumption of interface is 1.8W(16%). Power saving of applying purposed MDVS technique is 35% in digital processor, and power saving of OFDM technique is 10-12dB in RF front-end.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.104-107
• /
• 2000

We designed and implemented the RFIC(RF front-end IC) for DTV(Digital TV) tuner. The DTV tuner RF front-end consists of low noise IF amplifier fur the amplification of 900 MHz RF signal and down conversion mixer for the RF signal to 44MHz IF conversion. The RFIC is implemented on ETRI 0.8u high resistive (2㎘ -cm) and evaluated by on wafer, packaged chip test. The gain and IIP3 of IF amplifier are 15㏈ and -6.6㏈m respectively. For the down conversion mixer gain and IIP3 are 13㏈ and -6.5㏈m. Operating voltage of the IF amplifier and the down mixer is 5V, current consumption are 13㎃ and 26㎃ respectively.

• 한국통신학회논문지
• /
• 제31권7C호
• /
• pp.735-742
• /
• 2006

본 논문에서는 IEEE 802.16e OFDMA(Orthogonal Frequency Division Multiplexing-FDMA) TDD(Time Division Duplexing) 시스템 단말 수신기의 입력 신호에 대하여 DC 오프셋 보상, 자동 주파수 조정, 자동 이득 조정을 수행하는 DFE(Digital Front End)의 동작 원리와 Fixed-point 설계 방법에 대하여 설명하고, DFE의 성능을 ITU-R M. 1225 Veh-A 60km/h 채널 환경에서 시뮬레이션 결과를 통해 분석한다. DFE의 Fixed-point 설계시, 시스템의 성능에 영향을 주지 않는 범위 내에서 연산을 통해 출력되는 bit의 크기를 줄임으로서때 H/W 동작의 복잡도를 줄이고, Acquisition time과 안정도 간의 Trade-off를 고려하여 Loop Filter를 설계함으로서 DFE 의 Fixed-point 설계를 최적화 한다.

• 한국정보통신학회논문지
• /
• 제10권10호
• /
• pp.1804-1809
• /
• 2006

본 고에서는 디지털 회로의 저 전력소모의 설계와 구현에 관련된 디지털 전대역 회로 설계를 통해서 전반적인 전력 소모의 방법론과 이의 특성을 고찰하고자 한다. 디지털 집적회로의 설계는 광대하고 복잡한 영역이기에 우리는 이를 저전력 소모의 전반적인 회로 설계에 한정할 필요가 있다. 여기에는 로직회로의 합성과, 디지털 전대역 회로설계에 포함되어 있는 입력 clock 버퍼, 레치, 전압 Regulator, 그리고 케페시턴스와 전압기가 0.12 마이크론의 기술로 0.9V의 전압과 함께 쓰여져서 동적 그리고 정적 에너지 소모와 압력, 가속, Junction temperature 등을 모니터 할 수 있게 되어 있다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.300-311
• /
• 2016

The analog-to-digital-converter-based (ADC-based) backplane receivers that consist of a front-end ADC followed by a digital equalizer are gaining more popularity in recent years, as they support more sophisticated equalization required for high data rates, scale better with fabrication technology, and are more immune to PVT variations. Unfortunately, designing an ADC-based receiver that meets tight power and performance budgets of high-speed backplane link systems is non-trivial as both front-end ADC and digital equalizer can be power consuming and complex when running at high speed. This paper reviews the state of art designs for the front-end ADC and digital equalizers to suggest implementation choices that can achieve high speed while maintaining low power consumption and complexity. Design-space exploration using system-level models of the ADC-based receiver allows through analysis on the impact of design parameters, providing useful information in optimizing the power and performance of the receiver at the early stage of design. The system-level simulation results with newer device parameters reveal that, although the power consumption of the ADC-based receiver may not comparable to the receivers with analog equalizers yet, they will become more attractive as the fabrication technology continues to scale as power consumption of digital equalizer scales well with process.

• 디지털산업정보학회논문지
• /
• 제18권1호
• /
• pp.47-54
• /
• 2022

All things connected to the Internet have to ensure interoperability between each other. Web of Things (WoT) is an Internet of Things (IoT) Web standard technology that enables the communication between smart devices and web-based applications. In order for WoT to be possible, monitoring of all devices connected to the Internet have to be possible. To this end, various efforts are being made to develop network monitoring applications using the latest Web front-end frameworks, not traditional web-based monitoring. This paper examines and describes the possibilities of applying Web front-end frameworks such as React, Angular and Svelte to the development of network monitoring applications for WoT. This paper also describes the pros and cons of two major frameworks, React and Angular, in developing monitoring applications that support the cross-platforms and cross-browsers in WoT environments and examines the applicability of them by developing simple network monitoring applications using React.

• 전자공학회논문지
• /
• 제49권12호
• /
• pp.242-246
• /
• 2012

본 논문에서는 지상파 및 케이블 디지털 TV를 위한 더블 컨버전 (double-conversion) zero-IF 튜너에 적합한 저잡음 고선형 광대역 RF 프런트 엔드를 제안한다. 저잡음 증폭기는 전류 증폭 기반의 잡음 제거 기법을 적용하여 저잡음과 고선형성 특성을 갖는다. 상향 변환 믹서와 SAW 필터 버퍼는 3차 intermodulation 제거 기법을 적용하여 고선형성 특성을 갖는다. 제안한 RF 프런트 엔드는 $0.18{\mu}m$ CMOS 공정을 사용하여 설계하였고, 전원 전압 1.8 V에서 60 mA의 전류를 소모하면서 48 MHz에서 862Hz의 디지털 TV 밴드에서 30 dB의 전압 이득, 4.2 dB의 single side-band 잡음 지수, 40 dBm의 IIP2, -4.5 dBm의 IIP3의 성능을 보인다.

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.166-171
• /
• 2010

In this paper, the front-end of a digital receiver with a 25 kHz carrier frequency, 5 kHz symbol rate, and any excess-bandwidth is designed using two basic facts. The first is known as the uniform sampling theorem, which states that the sampled sequence might not suffer from aliasing even if its sampling rate is lower than the Nyquist sampling rate if the analog signal is a bandpass one. The other fact is that if the sampling rate is 4 times the center frequency of the sampled sequence, the front-end processing complexity can be dramatically reduced due to the half of the sampled sequence to be multiplied by zero in the demixing process. Furthermore, the designed front-end is simplified by introducing sub-filters and sub-sampling sequences. The designed front-end is composed of an A/D converter, which takes samples of a bandpass filtered signal at a 20 kHz rate; a serial-to-parallel converter, which converts a sampled bandpass sequence to 4 parallel sub-sample sequences; 4 sub-filter blocks, which act as a frequency shifter and lowpass filter for a complex sequence; 4 synchronized switches; and 2 adders. The designed front-end dramatically reduces the computational complexity by more than 50% for frequency shifting and lowpass filtering operations since a conventional front-end requires a frequency shifting and two lowpass filtering operations to get one lowpass complex sample, while the proposed front-end requires only four filtering operation to get four lowpass complex samples, which is equivalent to one filtering operation for one sample.

• 한국정보통신학회논문지
• /
• 제8권2호
• /
• pp.449-455
• /
• 2004

본 논문에서는 입력 정합(input matching) BIST(Built-In Self-Test, 자체내부검사) 회로를 이용한 RF front end(고주파 전단부)의 새로운 결함 검사방법을 제안한다. 자체내부검사 회로를 가진 고주파 전단부는 1.8GHz LNA(Low Noise Amplifier, 저 잡음 증폭기)와 이중 대칭 구조의 Gilbert 셀 믹서로 구성되어 있으며, TSMC 40.25{\mu}m$ CMOS 기술을 이용하여 설계되었다. catastrophic 결함(거폭 결함) 및 parametric 변동 (미세 결함)을 가진 고주파 전단부와 결함을 갖지 않은 고주파 전단부를 판별하기 위해 고주파 전단부의 입력 전압특성을 조사하였다. 본 검사방법에서는 DUT(Device Under Test, 검사대상이 되는 소자)와 자체내부검사회로가 동일한 칩 상에 설계되어 있기 때문에 측정할 때 단지 디지털 전압계와 고주파 전압 발생기만 필요하며, 측정이 간단하고 비용이 저렴하다는 장점이 있다.

• ETRI Journal
• /
• 제26권6호
• /
• pp.555-559
• /
• 2004

We propose an efficient digital IF down converter architecture for dual-mode WCDMA/cdma2000 based on the concept of software defined radio. Multi-rate digital filters and fractional frequency conversion techniques are adopted to implement the front end of a dual-mode receiver for WCDMA and cdma2000. A sub-sampled digital IF stage was proposed to support both WCDMA and cdma2000 while lowering the sampling frequency. Use of a CIC filter and ISOP filter combined with proper arrangement of multi-rate filters and common filter blocks resulted in optimized hardware implementation of the front end block in 292k logic gates.