• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.451-456
• /
• 2001

Today, most of data storage devices use digital storage type. In this thesis, a new digital storage media called rainbow disk was introduced. It doesn't use 1-bit digital signal, but 2 or 4 bits digital signal using colors, so it can increase $2{\sim}4$ times more capacity than existing digital media in case of having the same spot size. It has made possible by means of technological advancement of devices and software. The photo quality paper was used for writing data by color inkjet or laser printing, and high resolution scanner was used for reading data. To extract data from image, the converting program was used. This paper shows the concept of rainbow disk as well as its performance and capacity. Axiomatic design was used for evaluating and developing the whole system.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.4
• /
• pp.18-23
• /
• 2011

Generally, the digital circuit card can be tested by automatic test equipment using LASAR(Logic Automated Stimulus and Response). This paper proposes the ROM data extracting algorithm which can test the digital circuit card that consists usually ROMs. We are implemented of the proposed fault detecting program by LabWindow/CVI 8.5 and the digital automatic test instrument with NI-VXI(National Instrument - Versa Bus Modular Europe eXtentions for Instrumentation) card. We also make an interface circuit board connecting the digital test instrument and the digital circuit card. It shows the good performance of getting the data from ROMs.

• Journal of Biomedical Engineering Research
• /
• v.7 no.1
• /
• pp.53-58
• /
• 1986

This paper represent the design of a digital modem which transmits the ECG data from an ambulatory arrhythmia monitor over the telephone lines to a large hospital for the instantaneous interpretations. The digital modem provides on-line communications between the patient and the central computer located near cardiologists. For commercial telephone lines, the transmitting error rates of the digital modem were measured 200 times at a speed of 300 baud. In those measurements, the block errors-results, due to the misinterpretation of start and stop bits, did not occur, The data bit errors which were due to a single bit interpreted incorrectly were 0.78 (bits/10 ) . Since the acceptable data bit error limit is 10 per 106 bits transmitted, the digital modem designed in this paper can be used for the clinical applications without any difficulty.

• Nuclear Engineering and Technology
• /
• v.4 no.3
• /
• pp.181-185
• /
• 1972

A digital bandpass filter method is investigated for the data treatment in tile measurement of the reactor transfer function. It was found that the technique is very effective in eliminating the effects of external noise. A computer code was programmed for this method. The frequency response of a digital filter is calculated, and the data treatment with this method using a digital computer was illustrated for triangular and square waveforms. Error and restriction involved in use of this method are discussed.

• Journal of the Korean Geophysical Society
• /
• v.9 no.1
• /
• pp.7-19
• /
• 2006

Laser scanning is a new technology for obtaining Digital Surface Models(DSM) of the earth surface.It is a fast method for sampling the earth surface with high density and high point accuracy. This paper is for buildings extraction from LiDAR points data. The core part of building construction is based on a parameters filter for distinguishing between terrain and non-terrain laser points. The 3D geometrical properties of the building facades are obtained based on plane fitting using least-squares adjustment. The reconstruction part of the procedure is based on the adjacency among the roof facades. Primitive extraction and facade intersections are used for building reconstruction. For overcome the difficulty just reconstruct of laser points data used with digital camera images. Also, 3D buildings of city area reconstructed using digital map. Finally, In this paper show 3D building Modeling using digital map and LiDAR data.

• Journal of the Korea Society for Simulation
• /
• v.14 no.2
• /
• pp.15-24
• /
• 2005

The goal of a distributed simulation such as battle field simulation is to combine all kinds of simulations in the same synthetic environment and to make people interact at the same time. It is a key issue to share the same synthetic environment among simulations. To support reusability and affordability in the modeling and simulation area, DMSO(Defense Modeling and Simulation Office) of USA developed concepts such as HLA(High Level Architecture) and SEDRIS (Synthetic Environmental Data Representation and Interchange Specification). In the industrial simulation area, the digital manufacturing is the main stream. To reduce cost and to reuse simulation environment, the standardization becomes the focus of digital manufacturing. This study proposes to use SEDRIS to improve interoperability of manufacturing data. The simulation data of DELMIA, which is a leading commercial digital manufacturing solution, is mapped and translated into the SEDRIS transmittal format. Mapping of the manufacturing simulation data and the synthetic environment are implemented and verified through experiments.

• The Journal of the Korean dental association
• /
• v.57 no.9
• /
• pp.524-528
• /
• 2019

With the advances of CAD-CAM (computer-aided design and computer-aided manufacturing) technology, the field of modern clinical dentistry has been dramatically changed. The first step in the digital workflow for tooth-supported dental prosthesis is a data acquisition with intraoral digital or conventional impression techniques. For the accuracy of intraoral digital impression data, the basic principles of conventional impression should be applied. It is necessary to obtain a good visibility with properly-dried field and well-exposed margin of the prepared abutment. Currently, the equi- or supra-gingival finish line can be recommended as an indication for intraoral digital impression. The scan data are generally exported to '.stl' file format, which has only morphological information of black and whitem while '.obj' file format can store data on color and texture.

• Journal of Korean Society of Archives and Records Management
• /
• v.22 no.1
• /
• pp.201-217
• /
• 2022

This study aims to use Wikidata to increase access to archival resources and see ways to share and reuse constructed data. To this end, the status of digital archives locally and abroad was identified using the description standard of archival resources in the digital environment discussed in the archival science field and the research related to data management and sharing of digital archives. The structure and characteristics of Wikidata were identified, and cases of digital archives applying Wikidata were investigated. The case analysis suggested implications for data sharing and reuse as well as the considerations for applying Wikidata to digital archives. The results of this study can be used as preliminary data for developing services using Wikidata in the actual archive field by understanding the recent trends in data open and sharing related technologies in constructing digital archives.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.455-458
• /
• 2007

Currently, aortal surveying is getting advanced in the world. New digital equipment for aerial surveying makes improvement of accuracy, economical efficiency and reduces cost. for a result, however, there are required to produce a accurate product. In this study, we used two kinds of data, the one which used only GPS/INS data and the other one which used GPS/INS data added on GCPs from digital maps, and made as a mosaic to compare both of them whether which one is better based on digital maps. the result is that the data which used GPS/INS data added on GCPs from digital maps was a lot better than GPS/INS data.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.235-241
• /
• 2006

The demand of 3D terrain mapping techniques is increasing in many application fields such as CNS(Car Navigation System), web service system, DMB(Digital Multimedia Broadcasting) systems and etc To construct a 3D terrain map, it is a pre-requite step that register data collected from different surveying sources. This Paper Present the methodology to register airborne photo, LIDAR data, and digital map, which are major data sources to create a 3D terrain mao. For this purpose, we developed the generally applicable algorithm that uses linear features to register airborne photos and digital maps to LIDAR data. The algorithm explicitly formulates step-by-step methodologies to establish observation equations for transformation. The results clearly demonstrate the proposed algorithm is appropriate to register these data sources.