• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.235-241
• /
• 2006

The demand of 3D terrain mapping techniques is increasing in many application fields such as CNS(Car Navigation System), web service system, DMB(Digital Multimedia Broadcasting) systems and etc To construct a 3D terrain map, it is a pre-requite step that register data collected from different surveying sources. This Paper Present the methodology to register airborne photo, LIDAR data, and digital map, which are major data sources to create a 3D terrain mao. For this purpose, we developed the generally applicable algorithm that uses linear features to register airborne photos and digital maps to LIDAR data. The algorithm explicitly formulates step-by-step methodologies to establish observation equations for transformation. The results clearly demonstrate the proposed algorithm is appropriate to register these data sources.

• 한국항만학회지
• /
• 제14권2호
• /
• pp.209-217
• /
• 2000

This study is to develop the technology and the ways of the practical use of the integrated digital map of and Electronical Navigational Chart(ENC) and Digital Terrain Map(DTM) for the effective and scientific based conservation, development and management. In this study, as preliminary studies to make eventual integrated maps, the concept of coastal areas are defined and the characteristics of digital maps developed by Korean Geography Institute and National Marine Investigation Institute are carefully analyzed. A test coastal map was developed based on the integrated digital map, a high resolution satellite image and Global Positioning System. Results from the edge matching analysis of coastal lines shows 8 meters difference in maximum. The problems, causes and solutions for the edge matched differences are described. Furthermore, the practical value of utilization, future use and various field of application are described based on the integrated digital map data base of coastal area.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1999년도 추계학술대회논문집
• /
• pp.347-356
• /
• 1999

This study is to develop the technology and the ways of the practical use of the integrated digital map of and Electronical Navigational Chart(ENC) and Digital Terrain Map(DTM) for the effective and scientific based conservation, development and management. In this study, as preliminary studies to make eventual integrated maps, the concept of coastal areas are defined and the characteristics of digital maps developed by Korean Geography Institute and National Marine Investigation Institute are carefully analyzed. A test coastal map was developed based on the integrated digital map, a high resolution satellite image and Global Positioning System. Results from the edge matching analysis of coastal lines shows 8 meters difference in maximum. The problems, causes and solutions for the edge matched differences are described. Furthermore, the practical value of utilization, future use and various field of application are described based on the integrated digital map data base of coast area.

• 제어로봇시스템학회논문지
• /
• 제20권4호
• /
• pp.449-455
• /
• 2014

This paper presents a method for developing a TM (Traversability Map) from a DTM (Digital Terrain Model) collected by remote sensors of autonomous mobile robots. Such a map can be used to plan traversable paths and estimate navigation speed quantitatively in real time for robots capable of performing autonomous tasks over rough terrain environments. The proposed method consists of three parts: a DTM partition module which divides the DTM into equally spaced patches, a terrain information module which extracts the slope and roughness of the partitioned patches using the curve fitting and the fractal-based triangular prism method, and a traversability analysis module which assesses traversability incorporating with extracted terrain information and fuzzy inference to construct a TM. The potential of the proposed method is validated via simulation works over a set of fractal DTMs.

• 한국측량학회지
• /
• 제17권1호
• /
• pp.61-67
• /
• 1999

하천과 유역을 연구하는데 있어서, 유역에 대한 지형인자는 매우 중요한 부분을 차지한다. 이러한 지형인자를 구하기 위해서, 기존에서는 지형도상에서 직접 구하거나 지형도를 수치화하여 사용하였다. 그러나 이러한 방법은 매우 번거롭거나 비경제적이다. 본 연구에서는 미국의 DMA에서 제공하는 DTED를 사용하여, 하천과 유역을 생성하고, 지형인자를 추출하였다. 지형도를 수치화하여 구한 지형인자와 DTED에서 구한 지형인자들을 서로 비교함으로써 DTED의 활용여부에 대해서 알아보고자 하였다.

• 대한공간정보학회지
• /
• 제1권2호
• /
• pp.83-96
• /
• 1993

정사투영사진지도는 지형도와 동일한 축척을 지니면서도 사진의 형태로 표현되므로 현장감이 양호할 뿐만 아니라 판독이 용이하여 차세대의 지형도로 이용될 가능성이 매우 크다. 또한 수치형태의 정사투영영상은 현재 널리 응용되고 있는 지형공간정보체계의 격자형 기본 지형정보자료로 이용가능 하므로 그 효용성이 매우 크다. 본 연구에서는 프랑스의 SPOT 위성으로부터 취득한 수치영상자료를 이용하여 정사투영사진지도를 제작하는 방안을 연구하였다. 정사투영사진지도를 제작하기 위해서는 수치표고모형과 원영상을 이용하여 정사투영영상을 생성하는 과정이 요구되며 이를 수치미분편위수정이라고 한다. 수치미분편위수정 방법에 있어서는 수치표고모형의 정확도가 최종적인 정사투영사진지도의 정확도를 좌우하게 되므로 정확하고 효율적인 수치표고모형의 생성방법이 선행되어야 한다. 본 연구에서는 SPOT 위성영상으로부터 수치표고모형을 직접 생성하는 방안을 연구하였고, 이를 이용하여 정사투영영상을 생성하여 등고선을 중첩시키므로서 간단한 형태의 정사투영사진지도를 제작하는 방안을 제시하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.292-296
• /
• 2002

This study has been accomplished as a experimental study for field application of 3D Perspective Image Map creation using Digital Topographical Map and based on the Ortho-Projection Image which is generated from Satellite Overlay Images and the precise Relative Coordinates of longitude, latitude and altitude which is corrected by GCP(Ground Control Point). AS to Contour Lines Map which is created by Coordinate conversion of 1:5,000 Topographical Map, we firstly made Satellite Image Map to substitute for Digital Topographical Map through overlapping the original images on top of each Ortho-Projection Image created and checking the accuracy. In addition to 3D Image Map creation for 3D Terrain analysis of a target district, Slope Gradient Analysis, Aspect Analysis and Terrain Elevation Model generation, multidirectional 3D Image generation by DEM can be carried out through this study. This study is to develop a mapping technology with which we can generate 3D Satellite Images of a target district through the composition of Digital Maps and Facility Blueprint and arbitrarily create 3D Perspective Images of the target district from any view point.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.493-495
• /
• 2010

A three-dimensional flow simulation is performed to investigate the flow field in the ski resort on complex terrain. The present paper aims to study the wind effects of mountainous terrain on the gondola safety. Strong wind happens in the ski resort on the mountain by complex terrain and it causes the dangerous accident of gondola. A digital map around the ski resort area is used to model the actual complex terrain for a 3-D analysis domain. Wind direction and speed to be used as a boundary condition are taken from local meteorological reports. The numerical results show details of the velocity distribution around a ski resort. From the results, we can suggest the modification of the installation of gondola for the safety due to strong wind.

• 대한공간정보학회지
• /
• 제2권1호
• /
• pp.73-80
• /
• 1994

일반적으로 지형정보는 지도에 의해 취득되어 왔다. 그러나 지도는 실제 지형상태를 등고선, 도형, 기호, 문자, 색 등에 의해 표시하고 있으므로 현장감이 부족하고 판독이 어렵다. 따라서 항공사진이나 지상사진을 이용하여 지형에 대한 분석을 수행하기도 한다. 그러나, 항공사진이나 지상사진의 경우는 촬영시의 사진기의 자세와 대상물의 기복에 따른 기하학적 왜곡을 포함하고 있으므로 정확한 위치를 결정하기가 곤란하다. 따라서 사진 상에서 정확한 위치를 파악할 수 있도록 하기 위해서는 편위수정기에 의해 제작된 정사투영사진도가 이용되기도 한다. 편위수정기에 의한 정사투영사진지도의 제작은 매우 복잡하고 어려우며 필요한 자료를 신속하게 생성하기 곤란한 단점이 있어 널리 이용되지 못하였다. 본 연구에서는 전산기를 이용하여 수치사진측량기법에 의해 입체항공사진으로부터 수치표고모형을 생성하고, 이를 이용하여 정사투영사진지도를 제작하는 방법을 연구하므로서 정사투영사진지도를 보다 정확하고 신속하게 제작하는 방법을 제시하고자 하였다.

• 디지털산업정보학회논문지
• /
• 제7권3호
• /
• pp.115-121
• /
• 2011

The flight information visualization of the aircraft is the system which is widely used to the threat against low altitude tasks and terrain altitude. But, it is difficult to implement the system because of restrictions that GPS data and huge geographic information should be stored. In this paper, it proposes economic DMM (Digital Moving Map) system for flight information visualization from open-source-base. First, the flight information is transferred from X-Plane through UDP and then demonstrated on the DMM system. In the proposed DMM system, flight information is visualized on the map information downloaded from an ArcGIS Map server using the mapping data between the present altitude of the aircraft and the terrain altitude. The result of this paper could be used an economic tool in the field of flight information visualization and the game algorithm research.