• Journal of information and communication convergence engineering
• /
• 제9권3호
• /
• pp.276-281
• /
• 2011

This paper presents a method of constructing the switching function using edge-valued decision diagrams. The proposed method is as following. The edge-valued decision diagram is a new data structure type of decision diagram which is recently used in constructing the digital logic systems based on the graph theory. Next, we apply edge-valued decision diagram to function minimization of digital logic systems. The proposed method has the visible, schematic and regular properties.

• ETRI Journal
• /
• 제9권4호
• /
• pp.26-35
• /
• 1987

Switching system can be regarded as the key node of Integrated Services Digital Networks(ISDN) because it plays the Important role in realization of ISDN. As ISDN is evolved from the telephony Integrated Digital Network(IDN), the switching system for ISDN will be evolved from the function and structure of telephony digital switching system. At near future, ISDN switching system is expected to implement the integrated access and transparent switching functions for both voice and data. As final goals of switching system, advanced switching methods for information having various traffic characteristics such as voice, data, text and image should be considered. This paper considered. This paper will show some of the fundamental design challenges and architectural trends in ISDN switching system.

• ETRI Journal
• /
• 제39권4호
• /
• pp.525-534
• /
• 2017

A hardware-acceleration architecture that separates virtual network functions (VNFs) and network control (called HSN) is proposed to solve the mismatch between the simple flow steering requirements and strong packet processing abilities of software-defined networking (SDN) forwarding elements (FEs) in SDN/network function virtualization (NFV) architecture, while improving the efficiency of NFV infrastructure and the performance of network-intensive functions. HSN makes full use of FEs and accelerates VNFs through two mechanisms: (1) separation of traffic steering and packet processing in the FEs; (2) separation of SDN and NFV control in the FEs. Our HSN prototype, built on NetFPGA-10G, demonstrates that the processing performance can be greatly improved with only a small modification of the traditional SDN/NFV architecture.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권8호
• /
• pp.3701-3727
• /
• 2016

Recently Service Function Chaining (SFC) is promising to innovate the network service mode in modern networks. However, a feasible implementation of SFC is still difficult due to the need to achieve functional equivalence with traditional modes without sacrificing performance or increasing network complexity. In this paper, we present a configurable network service chaining (CNSC) mechanism to provide services for network traffics in a flexible and optimal way. Firstly, we formulate the problem of network service chaining and design an effective service chain construction framework based on integrating software-defined networking (SDN) with network functions virtualization (NFV). Then, we model the service path computation problem as an integer liner optimization problem and propose an algorithm named SPCM to cooperatively combine service function instances with a network utility maximum policy. In the procedure of SPCM, we achieve the service node mapping by defining a service capacity matrix for substrate nodes, and work out the optimal link mapping policies with segment routing. Finally, the simulation results indicate that the average request acceptance ratio and resources utilization ratio can reach above 85% and 75% by our SPCM algorithm, respectively. Upon the prototype system, it is demonstrated that CNSC outperforms other approaches and can provide flexible and scalable network services.

• 한국정보통신학회논문지
• /
• 제12권12호
• /
• pp.2201-2206
• /
• 2008

본 논문에서는 유한체의 수학적 성질과 그래프이론을 바탕으로 GF(P)상의 선형디지털스위칭함수구성을 효과적으로 구성하는 한가지 방법을 제안하였다. 제안한 방법은 주어진 임의의 디지털스위칭함수의 입출력 사이의 연관관계특성으로 부터 DCG를 도출한 후에 노드의 개수를 인수분해한다. 이때 행렬방정식을 해당 차수보다 낮은 기약다항식으로 인수분해하여 그 결과를 부분회로실현한 다음 선형결합함으로써 최종 선형디지털스위칭함수를 구성하였다. 그 결과 기존의 방법에 비해 선형디지털스위칭함수구성을 상당히 간단화 할 수 있었으며 회로구성은 유한체 GF(P)내에서 정의된 가산기와 계수곱셈기를 사용하여 용이하게 실현 할 수 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.721-724
• /
• 2006

본 논문에서는 분할기법을 이용하여 디지털논리스위칭함수를 구성하는 한가지 방법을 제안하였다. 먼저, 디지털논리시스템에 대한 분할기법의 개념을 서술하였고, 본 논문에서 사용되는 각종 정의에 대해 논의하였다. 또한, 제안한 방법으로 구한 디지털논리스위칭함수를 회로설계하기 위해 먼저, 각각의 분할함수에 기초를 둔 Building Block(BB)을 구성에 대해 서술하였다. 그리고 이들 BB를 근간으로 회로설계하는 방법에 대해 논의하였다. 그리고 제안한 방법을 적용 예를 들어 그 결과를 기존의 방법과 비교 및 검토하였다. 그 결과 기존의 방법에 비해 효과적인 cost를 얻을 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.398-399
• /
• 2019

본 논문에서는 최근에 디지털논리시스템의 회로 구현시에 적용되기 시작한 분할설계기법의 한가지 방법을 제안하였다. 기존의 디지털논리회로설계기법은 적용되는 개별소자를 어떻게 효과적이며 효율적으로 이용하느냐 하는 것이 큰 목적이었으나, 최근의 전자공학의 발달과 회로의 집적도가 높아짐에 따라서 디지털논리설계기법은 각각의 모듈을 구성하고 있는 소자들의 개별소자를 사용하는 것보다는 복잡하더라도 좀 더 경제적이고 다기능의 분할설계기법이 요구되고 있다. 이러한 내용을 근간으로 본 논문에서는 효과적인 분할기법을 이용한 스위칭함수구성의 한가지 방법을 제안하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.766-767
• /
• 2015

본 논문에서는 자동정리기법에 기반을 둔 스위칭함수 구성의 한가지 방법을 제안하였다. 제안한 방법은 기존의 방법들에 비해 좀 더 효율적이고 정규성, 확정성 등의 장점을 가진다. 향 후 제안한 방법은 각종 디지털논리시스템을 구현하는데 기여할 수 있을 것으로 기대된다.

• 디지털산업정보학회논문지
• /
• 제7권1호
• /
• pp.111-125
• /
• 2011

Smartphone is becoming as a core device of mobile environment. The purpose of this study is to investigate the factors affecting customer's buying decision on smartphone. Based on prior studies and cases, this study identifies network effect, switching cost, function, design, brand, after service, price as affecting factors of customer's buying decision on smartphone. It also aims to investigate the relationship between network effect/switching cost and re-purchasing. Result shows that network effect brand, after service are significantly related to customer's buying decision on smartphone by device types, but switching cost, function, design, price are not. Network effect also was found to be significantly related to the re-purchasing. The result of this study may provide a guideline of supply strategy with smartphone suppliers.

• 전기의세계
• /
• 제29권10호
• /
• pp.678-688
• /
• 1980

This paper is concerned with the computer design of the multiple-output switching functions by using the improved MASK method in order to obtain the paramount prime implicants (prime implicants of the multiple-output switching function) and new algorithm to design the optimal logic network. All the given minterms for each function are considered as minterms of one switching function to simplify the desigh procedures. And then the improved MASK method whose memory requirement and time consuming are much less than any existing known method is applied to identify the paramount prime implicants. In selecting the irredundant paramount prime implicants, new cost criteria are generated. This design technuque is suitable both for solving a problem by hand or programming it on a digital computer.