• The Journal of Advanced Prosthodontics
• /
• 제12권4호
• /
• pp.225-232
• /
• 2020

PURPOSE. This study aimed to fabricate provisional crowns at varying build directions using the digital light processing (DLP)-based 3D printing and evaluate the marginal and internal fit of the provisional crowns using the silicone replica technique (SRT). MATERIALS AND METHODS. The prepared resin tooth was scanned and a single crown was designed using computer-aided design (CAD) software. Provisional crowns were printed using a DLP-based 3D printer at 6 directions (120°, 135°, 150°, 180°, 210°, 225°) with 10 crowns in each direction. In total, sixty crowns were printed. To measure the marginal and internal fit, a silicone replica was fabricated and the thickness of the silicone impression material was measured using a digital microscope. Sixteen reference points were set and divided into the following 4 groups: marginal gap (MG), cervical gap (CG), axial gap (AG), and occlusal gap (OG). The measurements were statistically analyzed using one-way ANOVA and Dunnett T3. RESULTS. MG, CG, and OG were significantly different by build angle groups (P<.05). The MG and CG were significantly larger in the 120° group than in other groups. OG was the smallest in the 150° and 180° and the largest in the 120° and 135° groups. CONCLUSION. The marginal and internal fit of the 3D-printed provisional crowns can vary depending on the build angle and the best fit was achieved with build angles of 150° and 180°.

• 디지털융복합연구
• /
• 제14권6호
• /
• pp.381-393
• /
• 2016

아직까지 3D 프린팅이라는 새로운 패러다임은, 그 누구도 명확하게 기존 산업에 미칠 영향력이나, 그로부터 파생될 수 있는 새로운 비즈니스 모델의 형태나 규모를 규정하거나 가늠하기가 힘들지만, 3D프린팅 기술이 내포한 잠재적 가능성에 대하여 부정하는 이는 없으리라고 예상된다. 본 연구는, 3D 프린팅 기술이 가지는 무한한 가능성으로 인하여 각종 미디어를 통하여 자주 소개되고는 있으나, 정작 대학의 교육현장에서 활용할 수 있는 실질적인 정보와 자료가 부족하다고 판단, 새로운 창작도구로서 3D 프린팅 기술의 활용과 영향이 클 것으로 예상되는 디자인 관련학과에서, 실질적 적용과 활용이 가능한 현실적 교육안을 연구하는 것에 그 목적과 의의를 두고 진행되었다. 이를 위해 3D 프린팅 기술의 공정과정에 대한 분석을 기반으로, 학생들이 완성도 높은 결과물을 제작할 수 있도록 이론과 실습이 병행된 세 개의 순차적 구조를 지닌 교육과정을 구성, 제언해 보았다.

• 디지털융복합연구
• /
• 제16권10호
• /
• pp.235-241
• /
• 2018

출력물관리 시스템은 출력시 수집된 출력 로그 내에 개인정보(주민번호, 카드번호)가 존재하는지 패턴을 분석하여 사용자에게 경고 메시지 팝업 전달, 인쇄 강제 종료, 관리자에게 메일 발송 및 별도 로그 관리 기능을 갖추어야 한다. 인증 관리 역시 사용자 PC에 Agent를 설치하여 등록되어 있는 사용자만 프린트가 가능하며, 사용자 정보에 따라 작업이 허가되거나 거절될 수 있도록 제한 기능을 갖추어야한다. 또한 복합기로 프린트/복사/스캔 사용 시 ID카드 인증 후 문서 출력 및 복합기를 사용할 수 있으며, ID카드 미사용시 디바이스에 ID/PW를 입력 인증 후 복합기를 사용할 수 있도록 구축해야한다. 본 연구에서는 기존의 출력물 보안 방법들 보다 더욱 우수한 기술을 갖추고 있는 보안 업체인 (주)와우소프트와 공동으로 인터페이스를 개발하여 기록물관리 시스템을 위한 인터페이스들을 구축하였다. 또한 출력물관리를 위한 필요한 기본 기능들의 인터페이스를 설계하였으며 이를 바탕으로 출력물관리 시스템 구축에 기여하였다.

• 디지털융복합연구
• /
• 제18권3호
• /
• pp.349-355
• /
• 2020

제4차 산업혁명이 대두되며 다양한 산업들의 기술들이 융·복합 되거나 클라우딩 컴퓨팅, 모바일, 빅테이터 등의 기술로 인해 인류의 삶이 물질적이나 정신적으로 크게 변화하고 있다. 다양한 기술과 이에 맞는 새로운 직업의 탄생은 전통금속공예기술에 대한 교육과 직업에 있어 대중의 외면을 가져오고 있다. 이런 변화에 있어 공예교육 또한 현 시대에 맞는 교육방식을 찾고 연구하며, 교육 현장에 적용해 대중의 관심과 부흥을 일으켜야 한다. 이를 위해 새로운 소재 혹은 기술이 도입된 타 산업의 교육현장 사례를 조사하고 전통금속공예기법 교육에 활용하고자 한다. 또한 3D프린팅 기술의 다양한 사례와 특징을 조사하고 시간과 공간, 자원의 제약이 많은 공예기법 교육에 활용하여 전통금속공예기법 교육에 새로운 변화를 주고자 한다.

• 패션비즈니스
• /
• 제23권3호
• /
• pp.67-84
• /
• 2019

Since the early 2000s, various fashion design products that use 3D printing technology have constantly been introduced to the fashion industry. However, given the nature of 3D printing technology, the flexible characteristics of material of textile fabrics is yet to be achieved. The aim of this study is to develop the optimal design conditions for production of flexible and elastic 3D printing fabric structure based on plain weave, which is the basic structure in fabric weaving using SLS 3D printing technology. As a the result this study aims to utilize appropriate design conditions as basic data for future study of flexible fashion product design such as textile material. Weaving structural design using 3D printing is based on the basic plain weave, and the warp & weft thickness of 4mm, 3mm, 2mm, 1.5mm, 1mm, and 0.7mm as expressed in Rhino 6.0 CAD software program for making a 3D model of size $1800mm{\times}180mm$ each. The completed 3D digital design work was then applied to the EOS SLS Machine through Maker ware, a program for 3D printer output, using polyamide 12 material which has a rigid durability strength, and the final results obtained through bending flexibility tests. In conclusion, when designing the fabric structure design in 3D printing using SLS method through application of polyamide 12 material, the thickness of 1 mm presented the optimal condition in order to design a durable digital textile structure with flexibility and elasticity of the 3D printing result.

• 한국의류산업학회지
• /
• 제20권6호
• /
• pp.722-732
• /
• 2018

This study was to develop a dress form that is highly representative of the body shapes of senior men in their 50s and 60s. And this research was compared the measurements and forms of three different dress forms available in the market, in order to analyze the body type and suitability and provide a standard for developing and utilizing the dress forms. After extracting the body shapes of the senior men's 3D shape, the body type that is curvature on the back prevalent among senior men, was chosen. The dress form was created as follows: 3D modeling and rendering, printing with a FDM-type 3D printer. The dress forms were 3D-scanned and the 3D data was analyzed - classification drop value, area deviation, compared horizontal section and vertical section. The results were as follows: This suggested that the area deviation amount at the chest and hip circumference levels was larger in the commercial products than in the dress form in this study, while that at the waist circumference level was larger in the dress form in this study. The vertical length of the lateral shoulder point-waist circumference was smaller, the side shape showed severe curvature on the back, and the waist circumference was larger in the senior men dress form than the commercial products. The dress form developed in this study reflected the body type of senior men and, therefore, were suitable for fitting when creating clothes for senior men.

• 디지털산업정보학회논문지
• /
• 제10권4호
• /
• pp.109-116
• /
• 2014

In recent, ISM (Industrial Scientific Medical) band that is 2.4GHz band authorized free of charge is being widely used for smart phone, notebook computer, printer and portable multimedia devices. Accordingly, studies have been continuously conducted on the possibility of coexistence among nodes using ISM band. In particular, the interference of IEEE 802.11b based Wi-Fi device using overlapping channel during communication among IEEE 802.15.4 based wireless sensor nodes suitable for low-power, low-speed communication using ISM band causes serious network performance deterioration of wireless sensor networks. This paper examined a method of identifying channel status to avoid interference among wireless communication devices using IEEE 802.11b (Wi-Fi) and other ISM bands during communication among IEEE 802.15.4 based wireless sensor network nodes in ISM band. To identify channels occupied by Wi-Fi traffic, various studies are being conducted that use the RSSI (Received Signal Strength Indicator) value of interference signal obtained through ED (Energy Detection) feature that is one of IEEE 802.15.4 transmitter characteristics. This paper examines an algorithm that identifies the possibility of using more accurate channel by mixing utilization of interference signal and RSSI mean value of interference signal by wireless sensor network nodes. In addition, it verifies such algorithm by using OPNET Network verification simulator.

• Imaging Science in Dentistry
• /
• 제51권1호
• /
• pp.41-47
• /
• 2021

Purpose: This study aimed to compare the accuracy of 3-dimensional(3D) printed models derived from multidetector computed tomography (MDCT) and cone-beam computed tomography (CBCT) systems with different fields of view (FOVs). Materials and Methods: Five human dry mandibles were used to assess the accuracy of reconstructions of anatomical landmarks, bone defects, and intra-socket dimensions by 3D printers. The measurements were made on dry mandibles using a digital caliper (gold standard). The mandibles then underwent MDCT imaging. In addition, CBCT images were obtained using Cranex 3D and NewTom 3G scanners with 2 different FOVs. The images were transferred to two 3D printers, and the digital light processing (DLP) and fused deposition modeling (FDM) techniques were used to fabricate the 3D models, respectively. The same measurements were also made on the fabricated prototypes. The values measured on the 3D models were compared with the actual values, and the differences were analyzed using the paired t-test. Results: The landmarks measured on prototypes fabricated using the FDM and DLP techniques based on all 4 imaging systems showed differences from the gold standard. No significant differences were noted between the FDM and DLP techniques. Conclusion: The 3D printers were reliable systems for maxillofacial reconstruction. In this study, scanners with smaller voxels had the highest precision, and the DLP printer showed higher accuracy in reconstructing the maxillofacial landmarks. It seemed that 3D reconstructions of the anterior region were overestimated, while the reconstructions of intra-socket dimensions and implant holes were slightly underestimated.

• 디지털융복합연구
• /
• 제20권4호
• /
• pp.513-518
• /
• 2022

지난 2년간 코로나 19로 인한 사회의 모든 분야가 저발전을 이루고, 많은 피해를 입었다. 특히 사람간의 모임제안, 간격유지로 연구 분야에서 일하고 있는 많은 사람들은 특히 더 아무것도 할 수 없는 상황이었다. UX Design을 통한 코로나 19 사회에서 사람들의 사회적거리두기 방법 분석을 통해 정부거리 지침에 맞는 간격을 유지 할 수 있는 거리유지 장치를 개발하는 것이 본 연구의 목적이다. 거리유지 장치 개발을 위해 초음파거리감지센서와 배터리, 충전방식, 거리표시방식, 등의 UI 디자인에 관한 연구를 통해 LED의 색상의 변화로 거리를 표현한다. 본 연구의 방법은 거리유지 장치의 외형을 3D로 디자인하고 3D 프린터를 통해 프로토타입을 출력하여 초음파거리감지 센서, 네오픽셀모듈, 그리고 아두이노 설치를 통해 장치를 개발하고, 이것을 테스트 하여 코로나 19로부터 사회적거리두기의 실천을 돕는 실제 제품을 개발하는 것이다.

• The Journal of Advanced Prosthodontics
• /
• 제15권2호
• /
• pp.72-79
• /
• 2023

PURPOSE. The purpose of this in vitro study was to compare the accuracy of various 3D printers and a milling machine. MATERIALS AND METHODS. The die model was designed using CAD (Autodesk Inventor 2018 sp3). The 30 ㎛ cement space was given to the die and the ideal crown of the mandibular left first molar was designed using CAD (ExoCAD). The crowns were produced using the milling machine (Imes-icore 250i) and the 3D printers (Zenith U, Zenith D, W11) and they were divided into four groups. In all groups, the interior of each crown was scanned (Identica blue) and superimposed (Geomagic Control X) with the previously designed die. The difference between the die and the actual crown was measured at specific points. The Kruskal-Wallis test, the Mann-Whitney test, and Bonferroni's method were performed with a statistical analysis software (P < .008 in inter-group comparison P < .001 in intra-group comparison). RESULTS. In all groups, the center of the occlusal area and the anti-rotational dimple area showed significantly greater difference and the marginal area showed the smallest difference comparatively. The mean value of the difference in each area and the sum of the differences were higher in order of W11, Imes-icore 250i, Zenith D, and Zenith U. CONCLUSION. The digital light processing (DLP) method shows higher accuracy compared to the sereolithography (SLA) method using the same resin material.