• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1784-1787
• /
• 2005

In this paper, proportional modulator which controls the second pressure of the pneumatic system was studied and proportional operating of modulator was gotten by two digital valves that have a fast dynamic characteristics and were controlled by PWM operating method. In order to more precision pressure control, this modulator consist of not only high speed two digital valves but also pressure sensor, measurement equipment and controller having a microprocessing function. In this study, for the development of the new proportional modulator, various research such as PWM control method, test equipment manufacturing, testing and evaluation were accomplished.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.457-462
• /
• 1991

Recently, digital techniques have been applied to servo systems of the home VCR, which result in high accuracy, high stability and a small number of parts required. The servo systems are now becoming more compex because the latest home VCRs are stringly required to have many functions. Given these circumstances, software servo concepts were introduced to the VCR servo system with microprocessor. But there are some difficulties in the conventional digital PID controller, eg. caculating the exact gains or dynamics. In this paper, we introduce FLC(Fuzzy Logic Controller) to the speed/phase control for VCR drum motor. To show the usefulness of the proposed controller, some studies are discussed by simulation and experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.913-916
• /
• 1990

In this paper, attempts have been made to control AC synchronous servo motor used as actuators of joints of the FARA robot with high dynamic performance and precise positioning. The AC synchronous servo motors used in FARA robots have resolves as position sensors. Resolver to digital converters are used in order to obtain the information of rotor speed and position from resolver outputs. The proposed joint position control system consists of four speed controller and one position controller. Analog methods are used in the position controller, while digital methods are used in the position controller. For precise position control, PID control algorithm and interpolation functions are executed in two 16 bit microprocessors with sampling rate 2ms. Experimental results show that the proposed joint position control system can be effectively applied to industrial robots in order to obtain high dynamic performance and precise positioning. The proposed joint position control system is being used in the control of FARA robots of Samsung Electronics.

• 유공압시스템학회논문집
• /
• 제8권1호
• /
• pp.19-25
• /
• 2011

This study presents the design of digital amplifier.controller for a proportional control valve and the development of PID discrete control scheme by using RCP(Rapid Controller Prototyping) system. RCP system is the device to embed the control code developed in PC into the microcontroller on-site. Ramp input test using the digital amplifier.controller developed in this study was carried out for the proportional control valve of domestic production and Bosch Rexroth respectively. The instability problem occurred around maximum displacement of localized valve spool at ramp input test was solved by supplementing offset current to the duty ratio of PWM(Pulse Width Modulation) driving signal to the solenoid. The comparison of test results between localized proportional control valve and Bosch Rexroth's product shows that the characteristics obtained by ramp input test and static flow gains are alike each other. Two valves are about the same in dead bands and hysteresis characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.864-866
• /
• 2003

In this paper, the improvement of control performance for a magnetic levitation system is presented. The model of a single-magnet system with rail is derived. As a conventional controller, PID controller is designed and implemented. This controller has a narrow stability margin due to low-order controller structure so that it cause unstability for a flexible rail. So to improve the control performance and stability margin, a robust controller as a new controller is designed and implemented using a VME-based digital controller. As a result, the controller performance of the new designed controller is better than that of the conventional controller.

• 한국진공학회지
• /
• 제19권4호
• /
• pp.256-264
• /
• 2010

본 논문에서는 고진공용 터보분자펌프의 비접촉 고속회전을 위한 자기베어링 시스템의 디지털 제어시스템의 설계에 대하여 소개하였으며, 실례로 800 l/s급의 고진공 펌프에 대하여 축 유연모드의 후방향 위험속도를 넘는 최대 40,000 rpm까지의 회전실험 결과를 나타내었다. 제안된 제어시스템은 기본적으로 PID 기반의 직접궤환 제어기와 자이로스코픽 모멘트 효과를 제어하기 위한 교차궤환기, 유연모우드 감쇄를 위한 리드필터와 동기진동 저감을 위한 노치필터 등으로 구성되어 있으며, 이러한 제어기는 자기부상형 터보분자펌프 외에 고속 플라이휠과 같은 자기베어링에 적용될 수 있다.

• 제어로봇시스템학회논문지
• /
• 제8권1호
• /
• pp.80-88
• /
• 2002

As many sensors and actuators are used in automated systems, various industrial networks are adopted for digital control system. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network delays. This paper presents the implementation scheme of a networked control system via Profibus-DP network. More specifically, the effect of the network delay on the control performance was evaluated on a Profibus-DP testbed, and a GA-based PID tuning algorithm is proposed to design controllers suitable for networked control systems.

• 공학교육연구
• /
• 제19권2호
• /
• pp.3-7
• /
• 2016

A flow control system was designed and fabricated to control the flow rate of liquid through the pipe. This control system was composed of hardwares and software, hardwares as controller, gate valve, orifice meter and data aquisition board and software as National instruments Labview program. Control of flow rate was executed by adjusting the pneumatic valve located at the center of pipe line based on the control signal generated by LabView PID control algorithm, which converts analog signal measured by pressure difference of orifice to digital signal to adjust pneumatic valve. For the controller setup Ziegler-Nichols tuning technique was applied and control performances were investigated for not only the disturbance but also the set point changes. Developed system showed good control performances in flow control enough to use as teaching tool of feedback control theory and practice in university, and also as industrial application.

• 전자공학회논문지 IE
• /
• 제47권3호
• /
• pp.26-34
• /
• 2010

본 논문에서는 기본적인 형태는 퍼지 제어의 형태를 유지하면서 그 세부적 요소들을 신경회로망으로 구성한 뉴로-퍼지 제어기를 설계하였다. 뉴로-퍼지 제어기는 퍼지 제어 및 신경회로망 제어가 갖는 장단점을 서로 보완할 수 있도록 하였으며 On-Line상태에서 동조가 이루어지도록 하였다. 본 제어기의 성능을 평가하기 위해서 현재 로봇제어에서 많이 사용되고 있는 교류 서보 전동기의 속도제어에 적용시켰다. 가장 보편적인 제어기인 PID제어기 및 퍼지제어기와 비교실험 함으로써 제어기로서의 안정한 특성을 입증하였다. 특히 로봇처럼 급격한 부하변동에 대응할 수 있는 제어기 설계를 위해 부하를 인가하여 실험을 수행하여 성능을 입증하였다.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1234-1243
• /
• 1992

본 연구에서는 국부적인 퍼지제어 셀(fuzzy control cell:cell)을 도입하여 계산량 감소를 달성하고, 추론과정을 선형근사화한 조직적인 설계를 통하여 선형제어 이론을 FLC의 실용적인 면에 접목하고자 한다. 이를 위하여, 확률밀도함수 형태의 멤버쉽함수(membership function)와 선형화된 제어공간이 얻어지도록 전반적인 제어방 책을 결정한 다음, 주어진 상태에 가장 지배적(dominant)인 규칙을 갖는 몇 개의 대표 점을 찾아서 그 점들로 구성된 퍼지제어 셀을 생성하고, 퍼지연산을 생성된 셀에서만 수행하여 알고리즘과 계산을 단순화시킨다. 평가기준을 공평함에 두어서 조건부연결 어 'AND'에 T-norm인 대수곱을 적용하여 적합도를 취하고, 규칙들의 작용이 병렬발화 라는 관점으로 규칙연결어 'ALSO'는 'AND'의 공액인 'OR'에 해당되는 대수합연산 대신 에 확률측도와 유사한 산술평균을 적용하여 퍼지추론을 한다. 그리고, 각각의 제어 규칙에 대하여 퍼지추론한 결과와 그것의 평균중심을 곱하여 통합한 후, 무게중심법으 로 역퍼지화하여 일반화된 제어값을 얻는다. 이 값을 PID제어기를 이용하여 구현한 디지틀 보상기를 통과시켜 시스템에 한 제어를 얻는 조직적인 방법을 제안한다.