• 한국산업융합학회 논문집
• /
• 제26권3호
• /
• pp.401-409
• /
• 2023

Oscillating water column (OWC) type wave power generator system is a power generation system that uses wave energy, a sustainable and renewable energy source. Irregular cycles and wave heights act as factors that make it difficult to secure generation efficiency of the wave power generator system. Recently, research for improving power generation efficiency is being conducted by applying digital twin technology to OWC type wave energy converter system. However, digital twin using sensor data can predict erroneous performance due to uncertainty in the sensor data. Therefore, this study proposes an uncertainty analysis method for sensor data which is used in digital twin to secure the reliability of digital twin prediction results. Uncertainty quantification considering sensor data characteristics and future uncertainty information according to uncertainty propagation were derived mathematically, and confidence interval estimation was performed based on the proposed method.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권3호
• /
• pp.149-156
• /
• 2000

This study presents an investigation of the changes that have occurred in the coastal ocean area of Kwangyang Bay located in the South Coastal region of Korea using remote sensing data based on Landsat Thematic Mapper (TM) multispectral digital data from 1988 and 1996. The coastal changes were detected using the digital histogram method and vector trace method. All the images were preprocessed, i.e. geometrically corrected, before the training set selection. when comparing the histograms of 7-band TM data, it was found that the band 5 image exhibited two critical Digital Number(DN) peaks, thereby indicating new coastal water and coastal land data. Based on this information, the coastal ocean area of the band 5 image was calculated using the vector tracing method supported by a CAD program. The result shows that the coastal ocean area decreased by about 5 % between 1988 to 1994. Accordingly, this gives a strong indication that the continuing land development will have a serious impact on the ecosystem of Kwangyang Bay.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 공동학술대회
• /
• pp.65-68
• /
• 2009

항해서지란 정부기관에서 제작한 항해 목적의 책자 혹은 데이터베이스로서, 항해 요구사항을 만족하며 주로 등대표, 전파 신호, 항행통보, 항로지 등의 정보가 포함된다. 국제수로기구의 항해서지 워킹 그룹은 수로 및 항해 관련 요구사항을 전자적으로 표현하기 위해 표준을 수립하고 있으며, 항해서지를 책자 유형의 NP1, 전자 유형의 NP2, ECDIS 사용목적의 NP3로 구분하고 있다. 항해서지는 해도와 함께 중요한 정보로서 해도제작 체계와 연계, 최신성, 서비스 향상을 위해 전자적인 항해서지 개발이 요구되고 있으나 우리나라의 경우 책자 유형의 NP1의 수준에 있다. 이를 위해 본 연구에서는 국내 전자항해서지 현황과 국제 동향을 분석하여 전자항해서지 개발방안을 도출하고, 전자항해서지 시범개발로서, 항해서지의 한 종류인 항로지의 개발을 위해 남해안 항로지 데이터베이스를 구축하고 항로지 편집 및 관리 프로그램을 개발하였다.

• 대한조선학회논문집
• /
• 제61권3호
• /
• pp.143-151
• /
• 2024

In this study, we present a mapping framework for 3D spatial reconstruction of digital twin model using navigation and perception sensors mounted on an Autonomous Surface Vehicle (ASV). For improving the level of realism of digital twin models, 3D spatial information should be reconstructed as a digitalized spatial model and integrated with the components and system models of the ASV. In particular, for the 3D spatial reconstruction, color and 3D point cloud data which acquired from a camera and a LiDAR sensors corresponding to the navigation information at the specific time are required to map without minimizing the noise. To ensure clear and accurate reconstruction of the acquired data in the proposed mapping framework, a image preprocessing was designed to enhance the brightness of low-light images, and a preprocessing for 3D point cloud data was included to filter out unnecessary data. Subsequently, a point matching process between consecutive 3D point cloud data was conducted using the Generalized Iterative Closest Point (G-ICP) approach, and the color information was mapped with the matched 3D point cloud data. The feasibility of the proposed mapping framework was validated through a field data set acquired from field experiments in a inland water environment, and its results were described.

• Ocean and Polar Research
• /
• 제35권4호
• /
• pp.465-489
• /
• 2013

We collected references on South Pacific Studies from several resources: mainly internet resources and periodicals. Internet resources include associations, organizations and societies; cultural resources; environmental issues; government data; information resources; journals and news letters; libraries, archives, publishers; news sources; other sources; regional issues; selected full text documents and digital resources; and statistics. Periodicals include news and popular interest magazines; regional magazines and general interest publications; and scholarly and professional journals.

• 한국해양공학회지
• /
• 제17권4호
• /
• pp.81-85
• /
• 2003

The industry has undergone a significant change over the last decade: digital business has become a strategy to survive; the extended enterprise is being implemented; parts are made where conditions are most favourable; non-core activities are out-sourced; advanced manufacturing systems and information technologies are introduced to improve manufacturing performance. Suppliers and distributors become part of the supply chain and they all comprise an integrated international co-operative network to provide manufactured goods and support services for a world market just in time, at low prices and with quality surpassing customers' expectations. In this paper, we review various state-of-the-art information technologies for the shipbuilding industry. The successful introduction and implementation of those technologies will be the key enabler for e-transformation in the shipbuilding industry.

• 한국항해항만학회지
• /
• 제44권5호
• /
• pp.375-381
• /
• 2020

The IMO has established a regulation for the ECDIS installation on ships based on the IHO S-57 standards. The ECDIS supports sailors in achieving a safe voyage by using ENCs and monitoring the information of their ship. However, the S-57 standards were developed as edition 3.1 and prohibited revision for more than 20 years. So, the IHO developed a new standard as S-100 into the hydrography and maritime field instead of updating the S-57 to edition 4.0. In this study, the new S-100 ECDIS was developed and verified with ENCs and the digital maritime safety information by using a ship steering simulator and by conducting an on-board sea-trial test. It evaluated the impact on ship operations if the next-generation navigation support system is introduced. Based on this research, the S-100 ECDIS will generate improvements such as safe voyages by providing various of real-time safety information and up-to-date data to ship and sailors.

• 산업공학
• /
• 제15권3호
• /
• pp.230-240
• /
• 2002

Information technologies centered on the internet in the area of shipbuilding and marine engineering further incur the needs to increase the flexibility of the organization, the dispersion of work process, and the use of out sourcing, as well as the globalization of related market. In near future, electronic commerce and concurrent engineering based on CALS/EC and the Internet will be an integral part of the environment and upon these changes, ship design and construction will become a computer supported cooperative work of many dispersed and specialized groups. As the means of active response to these environmental changes, many new concepts such as digital shipbuilding, virtual shipyard, and simulation based design are appearing. In this paper, the concept and current status of digital manufacturing in general manufacturing industry will be reviewed. Then, related technologies, area of application and methods of digital manufacturing in shipbuilding and marine industries are presented. In addition, virtual assembly simulation system for shipbuilding(VASSS), a tool for crane operability and block erection simulation in virtual dock based on 3D product model, will be introduced.

• 대한조선학회논문집
• /
• 제45권5호
• /
• pp.554-561
• /
• 2008

This paper deals with an intelligent digital ship which aims at development to support economic and safe services through an integration into the hierarchically layered digital signals such as ship's navigation, maneuvering and control signal and establishing a one-man bridge system in order to provide a support systems between ship and land station. This paper introduces the results of the mid-term project sponsored from Ministry of Commerce, Industry and Energy which consists of three sub-project such as INS(Intelligent Navigation System), AIS(Automatic Identification System), and IMIT (Integrated Maritime Information Technology). The INS system that can allow ships to navigate economically and safely through the integration and analysis of national data within the ship. AIS is a system that reports automatically on the location of the ship in order to prevent the collision between ships and between the ship and the land. IMIT is a integrated system for providing an efficient and economic support system between ships and the land and a ship-land platform and technologies.

• 한국해양공학회지
• /
• 제16권6호
• /
• pp.1-6
• /
• 2002

The integration of Geographic Information Systems (GIS) with the hydrodynamic model was conducted in order to revitalize the use of geographical information and to aid in the understanding of tidal circulation patterns. A 2D finite difference numerical model was used to simulate n tidal circulation in the Suyoung Bay in Busan, Korea. CIS, especially the ArcView S/W is used to input the data of the numerical model, and is also used for the visualization of model outputs on the ground in the loosely coupled method. In this paper, an electronic navigational chart (ENC), which provides more accurate information in the ocean and coastal areas than any other digital information, is used as a base map for this integration. With the help of GIS, the integration can support th understanding of oceanographic information.