• Journal of Power Electronics
• /
• 제10권3호
• /
• pp.277-284
• /
• 2010

This paper presents a novel hybrid carrier based space vector modulation for cascaded multilevel inverters. The proposed technique inherits the properties of carrier based space vector modulation and the fundamental frequency modulation strategy. The main characteristic of this modulation are the reduction of power loss, and improved harmonic performance. The carrier based space vector modulation algorithm is implemented with a TMS320F2407 digital signal processor. A Xilinx Complex Programmable Logic Device is used to develop the hybrid PWM control algorithm and it is integrated with a digital signal processor for hybrid carrier based space vector PWM generation. The inverter offers less weighted total harmonic distortion and it operates with equal electrostatic and electromagnetic stress among the power devices. The feasibility of the proposed technique is verified by spectral analysis, simulation, and experimental results.

• 한국군사과학기술학회지
• /
• 제11권4호
• /
• pp.36-45
• /
• 2008

LYNX ESM system operates digital receiver for analyzing radar of intrapulse modulation signal. This paper contains DC offset compensation method of IQ channels, imbalancing comensation method of amplitude and phase, precisional PW measurement using adaptive threshold set, analyzing algorithm of intrapulse modulation signals. Its effectiveness was proven by technical and operational test.

• 한국전자파학회논문지
• /
• 제22권2호
• /
• pp.220-227
• /
• 2011

현대 이동 통신 기술의 급격한 발전과 함께 800 MHz 이상의 주파수 대역에서는 다양한 디지털 변조 방식에 의한 기술이 서비스되고 있다. 그러나 국내에서는 전자기파 방사의 영향에 대한 특별한 검토나 연구가 없이 IEC 61000-4-3에 기반한 방사 내성 시험이 AM 신호로만 수행되고 있으며, 광대역 디지털 변조 신호나 cdmaone(IS-95)나 WCDMA 접속 방식에 의한 PM 신호로는 시험되지 않고 있다. 본 연구는 전자기파 방사 내성 시험의 기술 표준을 검토하여, 국내 전파 환경에 적합한 인가 신호를 분석하고 시험하기 위해 수행되었다. 연구 결과로는 AM 신호보다 PM 신호나 디지털 변조 신호 인가 시, 더 큰 영향을 받는 것으로 확인되었다. 본 연구 결과는 국내 통신 기술의 환경에 맞는 정확하고 합리적인 방사 내성의 평가를 위해서는 단편적인 접근이 아닌 대역폭, 물리 채널, 변조 기술, 출력 전력 및 다중화에 의한 신호 등의 복합적 검토와 심층적 연구가 필요함을 보여준다.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.365-373
• /
• 2010

This paper proposes a hybrid single carrier sinusoidal modulation suitable for multiphase multilevel inverters. Multiphase multilevel inverters are controlled by hybrid modulation to provide multiphase variable voltage and a variable frequency supply. The proposed modulation combines the benefits of fundamental frequency modulation and single carrier sinusoidal modulation (SC-SPWM) strategies. The main characteristics of hybrid modulation are a reduction in switching losses and improved harmonic performance. The proposed algorithm can be applied to cascaded multilevel inverter topologies. It has low computational complexity and it is suitable for hardware implementations. SC-SPWM and its base modulation design are implemented on a TMS320F2407 digital signal processor (DSP). A Complex Programmable Logic Device realizes the hybrid PWM algorithm and it is integrated with a DSP processor for hybrid SC-SPWM generation. The feasibility of this hybrid modulation is verified by spectral analysis, power loss analysis, simulation and experimental results.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.249-250
• /
• 2006

In this paper, hardware design and implementation of digital controller for the High Precision Digital Power Supply (HPDPS) based on Digital Signal Processor (DSP) and Field Programmable Gate Array (FPGA) is presented. Developed digital controller is composed of high resolution Digital Pulse Width Modulation (DPWM) and high resolution analog to digital converter circuit with anti-aliasing filter. And Digital Signal Processor (DSP) has the capability of a few micro-second calculation time for one feedback loop. 32-bit DSP and DPWM with 150[ps] step resolution is used to implement the HPDPS. Also 18-bit 2 mega sample per second ADC board is adopted for the developed digital controller. Also, hardware structure of the developed digital controller and experimental results of the first prototype board for HPDPS is described.

• 한국군사과학기술학회지
• /
• 제8권4호
• /
• pp.102-109
• /
• 2005

In this paper, we propose a new listen-in technique to overcome the problems and the shortcomings which could possibly meet in the previous listen-in methods to deal with the blind signal manually according to operator's decision. In the proposed listen-in method, receiving the signals, classifying the modulation types, and demodulating the signals can be done automatically without operator's intervention. We realize the listen-in technology by developing the high speed frequency tuner, the automatic modulation recognizer, and the signal demodulator. In conclusion, we confirm and show that the developed equipment has a good performance in classifying the modulation type through the computer simulation and the field test.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2001년도 하계 학술대회 논문집(KISPS SUMMER CONFERENCE 2001
• /
• pp.89-92
• /
• 2001

본 논문에서는 프로그램-가능한(programmable) 소프트웨어 무선(software radio)$^{[1]}$ 디지털 통신을 위한 연구로, ASK(Amplitude Shift Keying), FSK(frequency Shift Keying), 그리고 PSK (Phase Shift Keying) 변조$^{[2]-[4]}$를 DSP(Digital Signal Processor)를 사용하여 프로그램-가능한 소프트웨어(알고리즘)로 구현하였다. 세개 의 서로 다른 변조 방식들, ASK, FSK, 그리고 PSK를 하나의 DSP에 구현하여 선택적 변조가 가능하도록 하였다. 사용된 DSP는 모토롤라(Motorola) 사의, 24-비트, 40 MHz에서 20 MIPS(Million Instruction per Second)로 동작하는 DSP56002$^{[5]-[6]}$이고, A/D (Analog to Digital) 와 D/A(Digital to Analog) 변환기는 크리스털(Crystal)사의 16-비트 그리고 최대 샘플링(sampling) 주파수 50 kHz인 CS4215 코덱 칩(codec chip)$^{[8]}$ 이 사용되었다.

• 한국콘텐츠학회논문지
• /
• 제7권12호
• /
• pp.254-261
• /
• 2007

이 논문에서는 계층변조를 적용하는 AT-DMB (advanced terrestrial digital multimedia broadcasting) 시스템에 적용할 수 있는 블라인드등화 기법을 제시하고 그 성능을 살펴본다. AT-DMB 시스템은 기존 T-DMB의 DQPSK (differential quadrature phase-shift keying) 신호와 역방향 호환성을 보장하고 더 높은 데이터 전송률을 지원하기 위해 16-QAM (quadrature amplitude modulation) 계층변조 방식을 적용한다. 이 결과 SNR (signal to noise ratio)에 따라 기존 T-DMB 심볼과 추가된 심볼은 서로 다른 판정오율 (decision error rate)을 가진다. 따라서 판정한 신호로부터 채널을 추정할 때 판정오율이 낮은 선순위 심볼과 판정오율이 높은 후순위 심볼의 신뢰도에 따라 다른 가중치를 줌으로써 판정치의 전체적인 신뢰도를 향상시킬 수 있다. 이 논문에서는 계층변조에 따른 비트 오율(bit error rate) 성능의 악화정도를 분석하고, 모의실험을 통해 판정신호의 신뢰도에 따라 가중치를 주는 제안방식이 가중치를 주지 않은 경우에 비해 비트 오율 성능이 향상됨을 확인하였다.

• 한국군사과학기술학회지
• /
• 제25권2호
• /
• pp.144-150
• /
• 2022

The on-board processor of satellite synthetic aperture radar(SAR) generates transmission signal by digital signal processing, converts it into an analog signal. At this time, the transmission signal generated from the baseband requires the frequency modulation to convert it to the high-frequency band in order to improve the stability. General frequency modulation method using local oscillator(LO) causes IQ imbalance due to phase error/magnitude error and these error reduce performance of SAR. To generate transmission signal without phase/magnitude error, this paper suggests design method of the frequency modulation method using digital to analog converter(DAC) at on-board SAR. For design, this paper analyzes the characteristic of DAC mode and uses pre-compensation filter. To analyze the proposed method performance, performance index are compared with IQ imbalance signals. This method is suitable for on-board SAR using fast sampling DAC and has the advantage of being able to solve IQ imbalances.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1281-1283
• /
• 1995

In this paper, we develop a prototype of the Optical SCM transmission module. This module is possible to application to electric facilities for control and measurements. Transmission channel number is two channels, namely, image and digital signal. In the image transmission, modulation method is AM, baseband signal is NTSC video signal and demodulation use PLL. Modulation of digital signal is QPSK, 1.544Mbps and demodulation use PLL. First, we calculate theoretical analysis about RF and Optical link in the transmission. This calculation is well correspond with practical system and transmission experiment is excellent, but this is only two channel model. And now, we plan to multichannel transmission to measure intermodulation, frequency assignments and optimal channel numbers et al.