• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.405-410
• /
• 2006

The digital map version 2.0 is national base map which is used for frame work data, paper map making as well as geographic information system. National Geographic Institude has been research to make small scale digital map by using large scale digital map. NGI made from 25 1/5,000 digital maps to one 1/25,000 digital map ver 2.0 with map generalization system in 2003. However, they could not make 1/10,000 and l/50,000 digital map version 2.0 because of There is no portrayal on the scale 1/10,000 and 1/50,000 digital map in the existing regulations. therefore. We create the specification of the digital map on scale in order to make small scale digital map version 2.0 such as 1/10,000 and 1/50,000 scale.

• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.2 s.16
• /
• pp.35-46
• /
• 2000

The digital maps, important data to build NGIS, require different scales in the same area. The organization for producing a digital map tries to find product method for digital map with economical efficiency and quality. The objectives of this study is to develope digital map generalization system to solve above problems. In order to develop this system, the work processing for digital map generalization is established, the analysis of related law and analysis on maps in different scales were performed, and each of digital map generalization algorithms was compared. The result of digital map generalization using this system shows that have a good result about positional accuracy which was evaluated by comparison between the generalized 1/25,000 and the corresponding 1/5,000 digital map. Furthermore, this system reduce the time required for 1/25,000 digital map production and the physical data amount by around 80%. In conclusion, the generalization system developed for this research can be useful for the digital map generalization from large scale to small scale digital map.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.75-78
• /
• 2009

As a digital map is tile based of 2D, it is difficult to be satisfied with accuracy and up-to-date. In this study, we analyzed requirements of an object-oriented continuous digital map and designed the system. The digital map is 3D continuous object and has the accuracy and up-to-date, and designs with management system, transfer system, change information management system, frequent updating system and, same time updating system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.4
• /
• pp.379-388
• /
• 2012

The Road Name Address system has begun to be applied and widely used since 2011. However, the Digital Map, or the national representative basic map, has no reference to the Road Name Address system. It causes some difficulties to use the Digital Map under the Road Name Address system. In this paper, we suggest a method for generating the expanded Digital Map by adding information about Road Name Address system into the objects of the Digital Map. First, object matching pairs between the road section layer from the Road Name Address Map and the road centerline layer from the Digital Map are found. Then attributes to be copied from the Road Name Address map to the Digital Map are extracted by comparing their attribute tables. Finally the extracted attributes are copied from the Road Name Address Map to the Digital Map. The expanded road centerline layer of the Digital Map then has attributes about road name according to the Road Name Address system, so that the georeferencing of the Digital Map according to the Road Name Address system becomes possible.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.321-328
• /
• 2004

Since National Geographic Information System was started, topographic maps have been made with computer aided editing of digital map, instead of etching map-size negative film. topographic mapping system's necessity is growing more and more, because digital map has changed into Ver.2.0 which include attributes of feature. On the basis of the previous study for analyzing correlation between the digital map feature code and the 1/5,000 topographic map specifications and trying to develop fundamental modules which will play a core role in topographic mapping system, in this study, we apply some 1/5,000 digital maps Ver.2.0 to topographic mapping system have implemented and try to analyze the result.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.4
• /
• pp.359-372
• /
• 1999

Recently, the digital map of national basemap has been made through NGIS(National Geographic Information System) project in Korea. The digital map should have to be corrected or updated to cope with the changes in topography in future. For that, the efficient method correspond with digital map should be presented. Digital photogrammetric system has been considered as an efficient method for digital mapping because it provides the results in digital form, but the system if not fully tested because the commercial system is in early stage. This study aims to present the way to correct or update digital map using the digital photogrammetric system. Digital mapping in the environment of digitalphotogrammetric system was executed and the results were analyzed and compared with those from analytical plotter.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.4
• /
• pp.343-355
• /
• 2001

The choice of map projection method is depend on the desired map purpose because there is no best projection for maps. Previous projection decisions for published paper maps are not necessarily the right decisions for corresponding digital maps. The map grid and index system is simpler than projection system but it can be easily understanded by general users. In this study, through the study for the grid and index systems of the digital and paper map in our and other countries, I suggested the improvement plan on the problems of our digital map. New grid and index system of this paper are presented on behalf of digital geospatial data which as digital topographic map, digital elevation model and other digital maps.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.207-220
• /
• 1997

This study aims to develope the production method of digital image map of high capable utiliy and terrain interpretability using aerial photo and Geospatial Information System. Theory and efficient practical method was studied to generate tile digital image map with low-cost personal computer system using the merging procedure of raster scanned aerial photo and vector topographic map. Determination theory of ground coordinates, digital image processing, production of digital elevation model was reviewed. And some chariteristics of digital image map, image collection method and significant concepts of digital image processing was studied. Also input and output way of image data to generate the digital image nap, production method of orthophoto map using aerial photo through digital differential rectification was studied. As the result, digital image map was produced and analyzed through the above mentioned procedures.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.281-286
• /
• 2003

Since National Geographic Information System was started, paper maps have been made with computer aided editing of digital map, instead of etching map-size negative film. Automated paper mapping system's necessity is growing more and more, because digital map has changed into Ver.2.0 which include attributes of feature. Therefore, in this study we try to analyze correlation of the digital map feature code and the 1/5,000 topographic map specifications which is necessary for paper mapping automatization using digital map Ver.2.0, and try to develop fundamental modules which will play a core role in automated paper mapping system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.239-247
• /
• 2007

The 3D spatial information projects have been processed and utilized in varied fields. However, the research of the 3D digital map for a role of national base map is not enough. The draft maps, which are raw data for generating 2D digital map, shows problems in generating 3D digital map. The objective of this research is to develop 3D digital map editing system for modifying and editing of 3D digital map from 2D vector and raster information such as a draft map, 2D digital map, DEM, aerial photo and so forth. This 3D digital map editing system was designed to include data structure of geometric and attribute object under provision of ISO/TC211 and OGC standard. This system was developed to implement the function of 3D stereo editing based on stereo viewing, 3D view editing based on projective, and 3D spatial operation. Using this system, 3D digital maps were able to be successfully produced from not only existing draft maps but also modified or edited draft maps and then application results were compared and analyzed.