• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.3
• /
• pp.155-162
• /
• 2008

In this paper we proposed a video watermarking algorithm based on a three dimension discrete wavelet transform (3D DWT) and direct spread spectrum (DSS). In the proposed method, the information watermark is embedded into followed frames, after sync watermark is embedded into the first frame. Input frames are divided into sub frames which are located odd row and even row. The sub frames are arranged as 3D frames, and transformed into 3D wavelet domain. In this domain the watermark is embedded using DSS. Existing video watermarking using 3D DWT is non-blind method but, proposed algorithm uses blind method. The experimental results show that the proposed algorithm is robust against frame cropping, noise addition, compression, etc. acquiring BER of 10% or below and sustains level of 40dB or above on the average.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.6
• /
• pp.13-19
• /
• 1995

A dual purpose robot automation system is developed for both arc welding and spot welding by one robot within a cell. The need for automation of both arc welding and spot welding processes is urgent while the production volume is not so big as to accommodate separate stations for the two processes. Also, space is too narrow for separate stations to be settled down in the factory. A spot welding robot is chosen and the functions for arc welding are implemented in-house at cost of advanced functions. For the spot welding, a single pole type gun is used and the robot has to push down the plate to be wolded, which causes the robot positioning error. Therefore, position error compensation algorithm is developed. The basic functions for the arc welding processes are implemented using the digital I/O board of robot controller, PLC, and A/D conversion PCB. The weaving pattern is taught in meticulously by manual teach. A fixture unit is also developed for dual purpose. The main aspects of the system is presented in this paper especially in the design and implementation procedure. The signal diagrams and sequence logic diagrams are also included. The outcome of the dual purpose welding cell is the increased productivity and good production stability which is indispensable for production volume prediction. Also, it leads to reduction of manufacturing lead time.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.3
• /
• pp.301-310
• /
• 2017

Quantum-dot cellular automata(QCA) is an alternative technology for implementing various computation, high performance, and low power consumption digital circuits at nano scale. In this paper, we propose a new universal gate in QCA. By using the universal gate, we propose a novel XOR gate which is reduced time/hardware complexity. The universal gate can be used to construct all other basic logic gates. Meanwhile, the proposed universal gate is designed by basic cells and a rotated cell. The rotated cell of the proposed universal gate is located at the central of 3-input majority gate structure. In this paper, we propose an XOR gate using three universal gates, although more than five 3-input majority gates are used to design an XOR gate using the 3-input majority gate. The proposed XOR gate is superior to the conventional XOR gate in terms of the total area and the consumed clock because the number of gates are reduced.

• Journal of Christian Education in Korea
• /
• v.74
• /
• pp.33-55
• /
• 2023

This study aims to explore the direction of Christian public practice in the post-COVID era, seeking to overcome the uncanny feeling caused by increased division and exclusion during the pandemic period. Firstly, we will investigate the unequal impact of COVID-19 on the labor market and examine ways to achieve economic justice in the post-COVID era. Subsequently, we will deliberate the role of Christianity in establishing publicness in the digital world and virtual spaces. Finally, viewing COVID-19 as a catastrophe caused by an anthropocentric worldview and exploitation driven by greed, we will explore the tasks of Christianity to overcome the crisis of the Anthropocene. Christian public practice should fulfill its mission of care and stewardship not only in social context but also in an ecological dimension. The author proposes "planetary citizenship education" for a harmonious relationship between human species and the Earth they inhabit.

• Journal of Digital Convergence
• /
• v.12 no.10
• /
• pp.337-343
• /
• 2014

The PRT(Personal Rapid Transit) in material or immaterial guided tracks is operated automatically according to the needs of passengers with the optimal non-stop path from the source to the destination. In recent years, the personal rapid transit (PRT) system, which affords superior accessibility and ease of use, has been spotlighted as a new transport system for the future. In this study, a method for vertical lifting of PRT vehicles was proposed to facilitate interlink with other means of transport and thereby improve the efficiency of door-to-door transport. For this purpose, operation control interfaces were designed and experiments were conducted. Programmable Logic Controller (PLC) dedicated for the PRT vertical lift was designed to interface with Operation Control Center (OCC) by Modbus TCP over Ethernet. We implemented a 3D graphical PRT operation simulator which can emulate the mixing operation of the virtual vehicles and the actual vehicles.

• Journal of Digital Convergence
• /
• v.17 no.1
• /
• pp.337-345
• /
• 2019

In this study, it focused on observational documentary based on observation. This study comparatively analyzed how differently the narrative style is implemented depending on the social and cultural background of East and West by analyzing the narrative style of Frederick Wiseman, a representative director of observational documentary who has been active in foreign countries for a long time, and Lee Seung-jun, recently become active in Korea. As a result of the analysis, It might be too early to judge by simple comparison of two directors, but it became an opportunity to see the difference between the long-standing observer style and the observer style documentary which actively accepts the new form. While it cannot be simply judged which style is better between the traditional observer style which shapes the simple contents into conflicts in the sequence structure and the recent style which sublimates the human inner conflict into the drama, a side could have been seen that the diversity is attained. It can be judged that the traditional documentary film can be gradually changed later. It was found that the documentary can emerge from the logic that it is difficult and boring, and that the same theme can be various and creative depending on what style is chosen.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.5
• /
• pp.25-33
• /
• 2011

This work proposes a skinny-type 10b 50MS/s 0.13um CMOS three-step pipeline ADC for CIS applications. Analog circuits for CIS applications commonly employ a high supply voltage to acquire a sufficiently acceptable dynamic range, while digital circuits use a low supply voltage to minimize power consumption. The proposed ADC converts analog signals in a wide-swing range to low voltage-based digital data using both of the two supply voltages. An op-amp sharing technique employed in residue amplifiers properly controls currents depending on the amplification mode of each pipeline stage, optimizes the performance of op-amps, and improves the power efficiency. In three FLASH ADCs, the number of input stages are reduced in half by the interpolation technique while each comparator consists of only a latch with low kick-back noise based on pull-down switches to separate the input nodes and output nodes. Reference circuits achieve a required settling time only with on-chip low-power drivers and digital correction logic has two kinds of level shifter depending on signal-voltage levels to be processed. The prototype ADC in a 0.13um CMOS to support 0.35um thick-gate-oxide transistors demonstrates the measured DNL and INL within 0.42LSB and 1.19LSB, respectively. The ADC shows a maximum SNDR of 55.4dB and a maximum SFDR of 68.7dB at 50MS/s, respectively. The ADC with an active die area of 0.53$mm^2$ consumes 15.6mW at 50MS/s with an analog voltage of 2.0V and two digital voltages of 2.8V ($=D_H$) and 1.2V ($=D_L$).

• Journal of Popular Narrative
• /
• v.27 no.3
• /
• pp.95-124
• /
• 2021

As the symbolic images of girls besides its definition have varied according to the age and society, a posthuman girl character recently appears in the digital cinema. This study aims to analyze its cinematic representations and the social contexts in which they are created. For this purpose, the study focuses on what extent the society allows its imagined figurations as a future female body and the meanings revolving around the image of 'technologically body-enhanced female fighter'. Current digital visualization technology has developed to the extent any imaged future humans can be represented, but posthuman girls' representations have its limitation that only a human-like figuration can be allowed in accord with the traditionally idolized image of girls. It is because of the representation logic in which digital cinema is visualized based on perceptual realism that values audiences' experiences. Despite such less critical figuration which does not dare to cross the boundary between the image of human and inhuman, the posthuman girl characters create a new category of the 'dangerous girls' who are both void of sexual femininity and independent of motherhood and heterosexual romance narrative. Of course, they support the modern human-centered belief that humans can take entire control of technology with their moral behaviors and dispel the fear about the negative impact the nature of technology may have on society at large by showing their child-like figuration protecting ethical values. However, the new character of 'unruly girl' exerts her subversive act that seeks to fight against the human-centered liberal humanistic values and melancholic feeling and vulnerability that the neoliberalism and technocracy enforce. When posthuman girl characters are considered to be a marker through which we can see how different social forces are intervening and competing each other in the upcoming posthuman age, the limited figuration of the posthuman girl characters in South Korean movies illustrates the opinionated thoughts toward the instrumentalism in technology but their bloodshed struggles reveal how the corporate or state-governed techno-biopower has oppressively treated and appropriated the human body as the technology-object and also provide a meaningful opportunity to rethink its unethical violence.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.51-62
• /
• 2003

This paper presents a novel survivor memeory management and decoding techniques with sequential backward state transition control in the trace back Viterbi decoder. The Viterbi algorithm is an maximum likelihood decoding scheme to estimate the likelihood of encoder state for channel error detection and correction. This scheme is applied to a broad range of digital communication such as intersymbol interference removing and channel equalization. In order to achieve the area-efficiency VLSI chip design with high throughput in the Viterbi decoder in which recursive operation is implied, more research is required to obtain a simple systematic parallel ACS architecture and surviver memory management. As a method of solution to the problem, this paper addresses a progressive decoding algorithm with sequential backward state transition control in the trace back Viterbi decoder. Compared to the conventional trace back decoding techniques, the required total memory can be greatly reduced in the proposed method. Furthermore, the proposed method can be implemented with a simple pipelined structure with systolic array type architecture. The implementation of the peripheral logic circuit for the control of memory access is not required, and memory access bandwidth can be reduced Therefore, the proposed method has characteristics of high area-efficiency and low power consumption with high throughput. Finally, the examples of decoding results for the received data with channel noise and application result are provided to evaluate the efficiency of the proposed method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.8
• /
• pp.62-71
• /
• 2001

This paper presents a design of the real-time digital image enhancement preprocessor for CMOS image sensor. CMOS image sensor offers various advantages while it provides lower-quality images than CCD does. In order to compensate for the physical limitation of CMOS sensor, the spatially adaptive contrast enhancement algorithm was incorporated into the preprocessor with color interpolation, gamma correction, and automatic exposure control. The efficient hardware architecture for the preprocessor is proposed and was simulated in VHDL. It is composed of about 19K logic gates, which is suitable for low-cost one-chip PC camera. The test system was implemented on Altera Flex EPF10KGC503-3 FPGA chip in real-time mode, and performed successfully.