• Journal of the Korea Society of Computer and Information
• /
• 제10권4호
• /
• pp.47-56
• /
• 2005

With the development of wearable(ubiquitous) computers, those traditional interfaces between human and computers gradually become uncomfortable to use, which directly leads to a requirement for new one. In this paper, we study on a new interface in which computers try to recognize the gesture of human through a digital camera. Because the method of recognizing hand gesture through camera is affected by the surrounding environment such as lighting and so on, the detector should be a little sensitive. Recently, Viola's detector shows a favorable result in face detection. where Adaboost learning algorithm is used with the Haar features from the integral image. We apply this method to hand area detection and carry out comparative experiments with the classic method using skin color. Experimental results show Viola's detector is more robust than the detection method using skin color in the environment that degradation may occur by surroundings like effect of lighting.

• Journal of the Ergonomics Society of Korea
• /
• 제30권1호
• /
• pp.265-273
• /
• 2011

Objective: The aim of this study is to investigate the attributing factors influencing usability of the mobile phones specifically designed for the elderly users. Efforts to identify factors that cause usability problems for the elderly users in using mobile phones can provide the groundwork for changes aimed at usability enhancement and design of interfaces of mobile phones. Background: It became important to understand the behaviors and tendencies of the elderly in communication as the society became older. The problems in digital divide is contributed to mainly lack of understanding in terms of the use pattern of the elderly and lack of consideration of their characteristics in designing user interfaces of most ICT devices. Method: A total of 30 elderly users who were over 65 years in age participated in usability evaluation test experiment and performed seven different tasks using a widely accepted model of universally designed mobile phone. Their performance was compared with that of contrast group that consisted of 10 younger participants who were on their 20s. Results: It was found that the elderly users had hard times in using mobile phones, especially in keypad manipulation among search, understanding, and manipulation subtasks. Conclusion: Older users seemed to have difficulty in all the subtasks of search, recognition, and manipulation. It was suggested that designers of mobile phones need to give careful consideration into designing visual interfaces for search tasks and keypads for easier control and input for the elderly users. Application: The study is expected to provide guidelines for the universal design of mobile phones and their interfaces for enhancing usability of the mobile phone for elderly users.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.983-986
• /
• 2007

Concrete surface grinding is required for flatness and adhesiveness of concrete surface. The procedure is, however, labor intensive and has a hazardous work condition. Also, the productivity and the quality of concrete surface grinding depend on the levels of worker. Thus, the development of remote controlled concrete surface grinding equipment is necessary to prevent the environmental pollution and to protect the workers from hazardous work condition. However, it is difficult to evaluate the grinded surface objectively in a remote controlled system. The machine vision system developed in this study takes the images of grinded surface with the network camera for image processing. Then, by representing the quality test results to the graphic MMI program of the remote control station, the quality control system is constructed. The machine vision algorithm means the image processing algorithm of grinded concrete surface and this paper presents the objective quality control standard of grinded concrete surface through the application of the suggested algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.667-670
• /
• 2005

As security and surveillance have become the center of interest, remote controlled CCTV(Closed-Circuit Television) market has been formed while rapid development of digital image compression technology and Internet triggered the advent of web cameras. The characteristic of web camera is that it can provide users with higher quality image than CCTV at any place where Internet access is available. However, As for the system administrator, the existing web camera have disadvantage in that they allows users only. who are connected to the server of the web camera, to see the image from it. In this paper, in order to make up for this defect, designed multi-vision interface showing multi images on single screen and, for the purpose of the improvement in efficiency, the functions of saving images and of scheduling the time to save the images.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제17권11호
• /
• pp.1219-1227
• /
• 1992

VXIbus is a standard for compatibility of instruments of multi-vendors and originated from the VMEbus. The devices for implementing VXIbus system can be categorized into the register based device and the message based device. In this paper we organized the A/D conversion module and the slot0 module, which form the register based VXIbus subsystem. The A/D conversion module is used as a digital voltmeter and LAN is used for communication between an external control computer and the slot0 module. The SCPI(Standard Commands for Programmable Instruments), which is a standard language for instruments, is transmitted from the external control computer to the slot0 module as the ASCII form, and then to the A/D conversion module after changing to the binary digit command. From the experiment. We verified that the measured voltage can be observed on external control computer and user interface can be improved by the modified graphic processing.

• International Journal of Automotive Technology
• /
• 제6권2호
• /
• pp.107-117
• /
• 2005

A distributed hardware-in-the-loop simulation (HILS) platform is developed for designing an automotive engine control system. The HILS equipment consists of a widely used PC and commercial-off-the-shelf (COTS) I/O boards instead of a powerful computing system and custom-made I/O boards. The distributed structure of the HILS system supplements the lack of computing power. These features make the HILS equipment more cost-effective and flexible. The HILS uses an automatic code generation extension, REAL-TIME WORKSHOP$^{ (RTW$^{) of MATLAB$^{ tool-chain and RT-LAB$^{, which enables distributed simulation as well as the detection and generation of digital event between simulation time steps. The mean value engine model, which is used in control design phase, is imported into this HILS. The engine model is supplemented with some I/O subsystems and I/O boards to interface actual input and output signals in real-time. The I/O subsystems are designed to imitate real sensor signals with high fidelity as well as to convert the raw data of the I/O boards to the appropriate forms for proper interfaces. A lot of attention is paid to the generation of a precise crank/ earn signal which has the problem of quantization in a conventional fixed time step simulation. The detection of injection! command signal which occurs between simulation time steps are also successfully compensated. In order to prove the feasibility of the proposed environment, a simple PI controller for an air-to-fuel ratio (AFR) control is used. The proposed HILS environment and I/O systems are shown to be an efficient tool to develop various control functions and to validate the software and hardware of the engine control system.

• Journal of the Korean Institute of Landscape Architecture
• /
• 제26권3호
• /
• pp.78-78
• /
• 1998

The purpose of this research is to develop a CAD-based program for data analysis of digital elevation model(DEM) on the aspect of landscape assessment. When handling DEM data as a visual simulation of topographic landscape, it is basic interest to analyze visible area and visualize visual sensitivity distributions. In reference with landscape assessment, more intuitive and interactive visualizing tools are needed, specially in area of visual approach. For adaptability to landscape assessment, algorithmic approaches to visibility analysis and concepts for visual sensitivity calculation in this study were based on processing techniques of entity data control functions used in AutoCAD drawing database. Also, for the purpose of quantitative analysis, grid-type 3DFACE entities were adopted as mesh unit of DEM structure. Developed programs are composed of main part named VSI written in AutoLISP and two of interface modules written in dialog control language(DCL0 for user-oriented interactive usage. Definitions of camera points(view points) and target points(or observed area) are available alternatively in combined methods of representing scenic landscape, scenery, and sequential landscape. In the case of scene landscape(single camera to fixed target point), only visibility analysis in available. And total visibility, frequency of cumulative visibility, and visual sensitivity analysis are available in other cases. Visual sensitivity was thought as view angle(3 dimensional observed visual area) and the strengths were classified in user defined level referring to statistical characteristics of distribution. Visibility analysis routine of the VSI was proved to be more effective in the accuracy and time comparing with similar modules of existing AutoCAD third utility.

• Journal of KIISE:Computer Systems and Theory
• /
• 제31권12호
• /
• pp.682-691
• /
• 2004

We present a novel haptic sculpting system where the user intuitively adds to and carves out material from a volumetric model using new sculpting tools in the similar way to handling real clay Haptic rendering and model deformation are implemented based on volumetric implicit surface. We enhance previous volume-based haptic sculpting systems by presenting fast and stable force computation on 3D models to be deformed. In order to bridge the gap between fast haptic process (1 KHz) and much slower visual update frequency(~30Hz), the system generates intermediate implicit surfaces between two consecutive physical models being deformed. It performs collision detection and force computation on the intermediate surface in haptic process. The volumetric model being sculpted is visualized as a geometric model which is adaptively polygonized according to the surface complexity. We also introduce various visual effects for the real-time sculpting system including mesh-based solid texturing, painting, and embossing/engraving techniques.

• The Transactions of the Korea Information Processing Society
• /
• 제6권12호
• /
• pp.3559-3568
• /
• 1999

The information overload with many information resources is an inevitable problem in modern electronic life. It is more difficult to search some information with user's information needs from an uncontrolled flood of many digital information resources, such as the internet which has been rapidly increased. So, many information retrieval systems have been researched and appeared. In text retrieval systems, they have met with user's information needs. While, in image retrieval systems, they have not properly dealt with user's information needs. In this paper, for resolving this problem, we proposed the intelligent user interface for image retrieval. It is based on HCOS(Human-Computer Symmetry) model which is a layed interaction model between a human and computer. Its' methodology is employed to reduce user's information overhead and semantic gap between user and systems. It is implemented with machine learning algorithms, decision tree and backpropagation neural network, for user adaptation capabilities of intelligent image retrieval system(IIRS).

• International Journal of Highway Engineering
• /
• 제15권6호
• /
• pp.41-47
• /
• 2013

PURPOSES : The purpose of this study is about noise which is generated from roads and is consist of irregular frequency variation from low frequency to various band. The existing methods of noise reduction are sound barrier that uses insulation material and absorbing material or have applied passive technology of noise reduction by devices. The total frequency band is needed to apply active noise control. METHODS : In this study applies to the field of road traffic environment, signal processing controller and various analog signal input/output, the amplifier module is based on parallel-core embedded processor designed. DSP performs the control algorithm of the road traffic noise. Noise sources in the open space performance of evaluation were applied. In this study, controller of active signal processor was designed based on the module of audio input/output and main controller of embedded process. The controller of active signal processor operates noise reduction algorithm and performance tests of noise reduction in inside and outside environment were executed. RESULTS : The signal processing controller with OMAP-L137 parallel-core processors as the center, DSP processors in the active control operations dealt with quickly. To maximize the operation speed of an object and ARM processor is external function keys and display for functions and evaluating the performance management system was designed for the purpose of the interface. Therefore the reduction of road traffic noise has established an electronic controller-based noise reduction. CONCLUSIONS : It is shown that noise reduction is effective in the case of pour tonal sound and complex tonal sound below 500Hz by appling to Fx-LMS.