• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.321-326
• /
• 2003

The subjects of this study are to examine and to apply the methods of making 1:5,000 scale maps using 1m resolution stereo images of IKONOS for the Munsan area of Paju-city where aerial photo surveying cannot possible because of security conditions. GCP(Ground Control Point) were acquired from GPS surveying and were to perform geometric corrections on images. Digital Map used IKONOS stereo images and it worked from the digital analytical stereoplotter. From field investigation, RMSE errors of the plane and vertical positions are estimated to 1.706m and 1.231m, respectively. The plane accuracy is better than an accuracy required by NGIS (national GIS) programs. Local information from field investigation was added and the resulting maps should be good as digital map under the scale of 1/5,000.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.219-224
• /
• 2003

Recently, the number of the use of Digital Photogrammetry is increasing, the Digital Photogrammetry is used for the acquisition of images, remote sensing and three dimension location. Especially, the three dimension location is more activated to use digital camera for the Digital Photogrammetry. The reason is that it is cheap and easy to use and also it has high confidence. Using non-metric digital camera not metric camera, in this research, to get images and apply the images to the Direct Liner Transformation which is one of the techniques in Digital Photogrammetry to get three dimensional location of a point. Ⅰ programmed the procedure with Visual C++ to get the position of points speedly and I tested possibility whether it can analyze the displacement and the existence of structure with measurement system which is structured by a inexpensive non-metric digital camera.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.22 no.1
• /
• pp.117-127
• /
• 1992

This investigation was performed to test the readability of the video based digital radiography, that can be applied clinically, compared with the periapical radiograph. The experiments were performed with IBM-PC/AT compatible, video camera and ADC (analog-digital converter). And spatial resolution was 512 X 480 with 256 (8 bit) gray levels. The radiographs obtained by using variable steps of exposure time were digitized. and then the digital images were analyzed. The obtained results were as follows: 1. There was no remarkable difference in readability between the radiographs and their digital images. However, under over exposure the digital images were superior to the radiographs in readability and vice versa. 2. As the exposure time was increased, the gray level of the digital image was decreased proportionally. 3. The correlation beween the regions of interest and the aluminum step wedges were relatively close; R=0.9965 (p <0.001).

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.24 no.2
• /
• pp.279-290
• /
• 1994

The purpose of this study was to compare the diagnostic accuracy of periapical radiographs and their digitized images for the detection of simulated interproximal carious lesions. A total of 240 interproximal surfaces was used in this study. The case sample was composed of 80 anterior teeth, 80 bicuspids and 80 molars which were prepared in order to distribute the surfaces from carious free to those containing simulated carious lesions of varying depths (0.5㎜, 0.8㎜, and 1.2㎜). The periapical radiographs were taken by paralleling technique and film used was Kodak Ektaspeed(E group). All radiographs were evaluated by five dentist to recognize the true status of simulated carious lesion. They were asked to give a score of 0, 1, 2, or 3. Digitized images were obtained using a commercial video processor(FOTOVIX Ⅱ- XS). And the computer system was 486 DX PC with PC Vision and frame grabber. The 17' display monitor had a resolution of 1280×1024 pixels(0.26㎜ dot pitch). But the one frame of the intraoral radiograph has a resolution of 700×480 pixels and each pixel has a grey level value of 256. All the radiographs and digital images were viewed under uniform subdued lighting in the same reading room. After a week the second interpretation was performed in the same condition. The detection of lesions on the monitor was compared with the finding of simulated interproximal carious lesions on the film images. The results were as follows: 1. When the scoring criteria was dichotomous ; lesion present and not present 1) The overall sensitivity, specificity and diagnostic accuracy of periapical radiographs and their digital images showed no statistically significant difference. 2) The sensitivity and specificity according to the region of teeth and the grade of lesions showed no statistically significant difference between periapical radiographs and their digital images. 2. When estimate the grade of lesions ; score 0, 1, 2, 3 1) The overall diagnostic accuracy was 53.3% on the intraoral films and 52.9% on digital images. There was no significant difference. 2) The diagnostic accuracy according to the region of teeth showed no statistically significant difference between periapical radiographs and their digital images. 3. The degree of agreement and reliability 1) Using gamma value to show the degree of agreement, there was similarity between periapical films and digital images. 2) The reliability of each twice interpretation of periapical films and digital images showed no statistically significant difference. In all cases P value was greater than 0.05, showing that both techniques can be used to detect the incipient and moderate interproximal carious lesions with similar accuracy.

• Tunnel and Underground Space
• /
• v.20 no.6
• /
• pp.421-433
• /
• 2010

The digital images to be used for digital vision measurement like digital face mapping and photogrammetric monitoring in construction could be influenced by various conditions such as a kind of light, the intensity of radiation, camera set-up and so on. Because it is very difficult to assess the rock mass from the digital images acquired under different circumstances, some tests and analysis are carried out to modify the images to be suitable and consistent for the digital image optimization. As a result, the recommended conditions for the acquisition of optimized digital images are suggested.

• Imaging Science in Dentistry
• /
• v.42 no.4
• /
• pp.243-247
• /
• 2012

Purpose: This study was performed to compare the inverted digital images and film-based images of dry pig mandibles to measure the periodontal bone defect depth. Materials and Methods: Forty 2-wall bone defects were made in the proximal region of the premolar in the dry pig mandibles. The digital and conventional radiographs were taken using a Schick sensor and Kodak F-speed intraoral film. Image manipulation (inversion) was performed using Adobe Photoshop 7.0 software. Four trained examiners made all of the radiographic measurements in millimeters a total of three times from the cementoenamel junction to the most apical extension of the bone loss with both types of images: inverted digital and film. The measurements were also made in dry mandibles using a periodontal probe and digital caliper. The Student's t-test was used to compare the depth measurements obtained from the two types of images and direct visual measurement in the dry mandibles. A significance level of 0.05 for a 95% confidence interval was used for each comparison. Results: There was a significant difference between depth measurements in the inverted digital images and direct visual measurements (p>|t|=0.0039), with means of 6.29 mm ($IC_{95%}$:6.04-6.54) and 6.79 mm ($IC_{95%}$:6.45-7.11), respectively. There was a non-significant difference between the film-based radiographs and direct visual measurements (p>|t|=0.4950), with means of 6.64mm($IC_{95%}$:6.40-6.89) and 6.79mm($IC_{95%}$:6.45-7.11), respectively. Conclusion: The periodontal bone defect measurements in the inverted digital images were inferior to film-based radiographs, underestimating the amount of bone loss.

• Journal of applied mathematics & informatics
• /
• v.18 no.1_2
• /
• pp.505-512
• /
• 2005

In this paper, we introduce another statement of a digital $(k_{0}, k_{1})-homeomorphism$ which is suitable for an approach to write an efficient algorithm for discriminating digital images with respect to the digital $(k_{0}, k_{1})-homeomorphism$.

• Imaging Science in Dentistry
• /
• v.32 no.3
• /
• pp.147-151
• /
• 2002

Purpose: To compare the standard deviation of gray levels on digital subtracted images obtained by different dental subtraction programs. Materials and Methods: Paired periapical films were taken at the lower premolar and molar areas of the phantoms involving human mandible. The bite registration group used Rinn XCP equipment and bite registration material, based on polyvinyl siloxane, for standardization. The no bite registration group used only Rinn XCP equipment. The periapical film images were digitized at 1200 dpi resolution and 256 gray levels by a flat bed scanner with transparency unit. Dental digital subtraction programs used for this study were Subtractor (Biomedisys Co., Korea) and Emago (Oral Diagnostic Systems, The Netherlands). To measure the similarities between the subtracted images, the standard deviations of the gray levels were obtained using a histogram of subtracted images, which were then analyzed statistically. Results: Subtracted images obtained by using the Emago program without manual selection of corresponding points showed the lowest standard deviation of gray levels (p<0.01). And the standard deviation of gray levels was lower in subtracted images in the group of a bite registration than in the group of no use of bite registration (p < 0.01). Conclusion: Digital radiographic subtraction without manual selection of reference points was found to be a convenient and superior method.

• The KIPS Transactions:PartB
• /
• v.15B no.3
• /
• pp.245-252
• /
• 2008

We present a classification algorithm based on ant colony system(ACS) for classifying digital images. The ACS has been recently emerged as a useful tool for the pattern recognition, image extraction, and edge detection. The classification algorithm of digital images is very important in the application areas of digital image coding, image analysis, and image recognition because it significantly influences the quality of images. The conventional procedures usually classify digital images with the fixed value for the associated parameters and it requires postprocessing. However, the proposed algorithm utilizing randomness of ants yields the stable and enhanced images even for processing the rapidly changing images. It is also expected that, due to this stability and flexibility of the present procedure, the digital images are stably classified for processing images with various noises and error signals arising from processing of the drastically fast moving images could be automatically compensated and minimized.

• Journal of the Korean Society of Costume
• /
• v.63 no.2
• /
• pp.45-54
• /
• 2013

With the development of digital technology, clothes of unique textiles using the digital printing techniques have appeared as a creative trend in textile design. The development of digital textile printing technology has allowed the fashion industry to utilize it as an expressive method of a surrealist trend in current fashion designs, and so it is necessary to understand and study this phenomenon. The present study is an attempt to understand this modern fashion phenomena from an artistic perspective by looking at textile designs that applied actual images to textiles, so that this trend in fashion design can be better understood. In this context, this study aims to examine characteristics and expressive techniques of d$\acute{e}$paysement, automatisme associated with digital textile printing by using actual images among surrealist expressions, and to investigate creative expressions of textile design freely expressing the visual boundary between reality and surrealism with the development of digital technology. For research methods, we reviewed technical texts and previous studies related to our research topic for theoretical exploration and investigated the Internet data and used them for basic data. In the case study, we came up with the characteristics and meanings by classifying fashion design cases using digital textile printing techniques according to expressive techniques of surrealist d$\acute{e}$paysement, automatisme. Details of this study are as follows: First, it investigates the definition and expressive characteristics of d$\acute{e}$paysement, automatisme of the surrealist expression for its theoretical understanding. Second, it comes up with the characteristics by analyzing the digital textile cases from the perspective of d$\acute{e}$paysement, automatisme. Third, it deduces the expressive methods and characteristics of digital textile printing from a the perspective of surrealist d$\acute{e}$paysement, automatisme based on the resulting characteristics. The conclusions show that d$\acute{e}$paysement, automatisme, which consists of improvisation and coincidence, maximized the mysterious images of derealisation and mysterious primitive images. These things emphasized the characteristics of maximization of images, derealisation, and rationalization of irrationalism.