• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.363-367
• /
• 2010

A new two step on-axis digital holography (DH) is proposed without any assumptions, phase shifting, or complicated optical components. A dual-channel Mach-Zehnder interferometer was employed. Using that setup, the object field can be reconstructed requiring only two step measurements. To eliminate position difference between two charge-coupled device (CCD) cameras, a matched filter algorithm was used. Experimental results are compared to those of the traditional phase shifting technique. The proposed approach can also be applied to single-exposure on-axis DH for real time measurement.

• 한국가시화정보학회지
• /
• 제16권1호
• /
• pp.48-53
• /
• 2018

In this study, the effect of injection pressure on the column diameter and droplet velocity of liquid jet with the weakly turbulent Rayleigh-like breakup mode is experimentally studied using digital microscopic holography (DMH). The injection nozzle has the diameter of $50{\mu}m$ and injection pressure is varied from 0.1 to 0.4 MPa. When the micro liquid jet is injected into still air, the double-pulsed holograms was recorded on a CCD sensor and numerically reconstructed in order to obtain well focused images. In this study, the liquid column diameter from $50{\mu}m$ orifice nozzle is shown to be changed slightly but the droplet velocity is increased proportionally as the injection pressure is increased.

• Journal of the Optical Society of Korea
• /
• 제15권2호
• /
• pp.146-151
• /
• 2011

We describe, throughout a Mach-Zehnder interferometric configuration, a new test sieves calibration method based on off-axis digital holography. The experiment is conducted on a test sieve of square openings. The nominal sieve opening is 1.00 mm with maximum individual opening of 1.14 mm in size. The recorded off-axis hologram is numerically processed using Fresnel transforms to obtain an object wave (amplitude and phase). From the reconstructed phase, the average size of the illuminated openings has been measured precisely. The proposed method can provide a real time solution for calibrating test sieves very precisely and with moderate accuracy.

• 전기전자학회논문지
• /
• 제20권3호
• /
• pp.291-294
• /
• 2016

본 논문은 새로운 광학적 일회용 패턴암호 상호 인증 방법을 제안한다. 이 방법은 2-단계 위상천이 디지털 홀로그래피 기법을 사용하여 이중 인증을 제공하고, 광학적 일회용 패턴암호를 상호 양방향으로 시도-응답 악수 기법을 구현하여 양방향 인증을 수행한다. 클라이언트와 서버는 상호 인증시 일회용 패턴암호를 무작위 수로 선택하여 오직 한번만 사용하고 이를 암호화하여 전송하기 때문에, 되풀이 공격이나 중간자 공격과 같은 암호공격으로부터 암호시스템을 보호하고 보안수준을 한층 더 높일 수 있다.

• 한국광학회지
• /
• 제25권4호
• /
• pp.169-192
• /
• 2014

본 논문에서는 기존 스테레오 3D 방식의 문제를 해결할 수 있는 집적영상 및 디지털 홀로그래피 방식을 포함하는 공간영상방식의 3차원 영상기술에 대해 소개하고 최근의 국내외 연구개발 동향에 대해 알아본다. 또한 이를 기반으로 향후 연구개발 방향을 전망한다.

• 조명전기설비학회논문지
• /
• 제28권8호
• /
• pp.1-5
• /
• 2014

Conoscopic holography, which consists of two circular polarizers and an uniaxial crystal, is incoherent holographic technology for three-dimensional display and non-contact diagnosis. In this paper, we derive the longitudinal and lateral intensities from point-source hologram made by conoscopic holography. Also, the longitudinal and lateral resolutions of conoscopic holography will be obtained from the longitudinal and lateral intensities, respectively, according to Rayleigh criterion.

• Journal of the Korean Physical Society
• /
• 제73권12호
• /
• pp.1845-1848
• /
• 2018

We introduce a process for optically reconstructing full-color holographic images recorded by optical scanning holography. A complex RGB-color hologram was recorded and converted into a binary hologram using a direct binary search (DBS) algorithm. The generated binary hologram was then optically reconstructed using a spatial light modulator. The discrepancies between the reconstructed object sizes and colors due to chromatic aberration were corrected by adjusting the reconstruction parameters in the DBS algorithm. To the best of our knowledge, this represents the first optical reconstruction of a full-color hologram recorded by optical scanning holography.

• 전자통신동향분석
• /
• 제38권2호
• /
• pp.66-74
• /
• 2023

Holography is the most promising 3D imaging technology to faithfully record and reproduce light information. In addition, it is widely explored in metrology for applications such as microscopy and tomography because it can accurately measure 3D shapes. However, the data size of a digital hologram is very large, and the data characteristics are notably different from those of conventional 2D images. The Joint Photographic Experts Group (JPEG) is a group of experts from the International Organization for Standardization/International Electrotechnical Commission. This group develops and maintains standards for still image compression. In 2014, the JPEG released a new standard for 3D image compression called JPEG Pleno to represent light fields, point clouds, and holograms. Among them, JPEG Pleno Holography is the first international standard for hologram compression. We review recent advances in JPEG Pleno Holography standardization and discuss future directions of development.

• 정보저장시스템학회논문집
• /
• 제8권2호
• /
• pp.44-49
• /
• 2012

We measured the surface flatness of both sides for refractive media using the transmitted digital holography method. To enhance the accuracy of the result, phase-shifting system was used. With two different phase modulation of reference beam, the phase profile of object can be easily obtained. Thus, we proposed the surface measurement method which can measure large area fast, compared with conventional methods. To guarantee the reliability of obtained result, we compared with Zygo measurement system. With the proposed method, the surface flatness of $3.45{\mu}m$ resolution could be obtained.

• 한국광학회지
• /
• 제17권4호
• /
• pp.323-328
• /
• 2006

디지털 홀로그램에서 영상 재현 시 영차 회절광에 의한 잡음으로 신호대 잡음비가 좋은 영상을 구현하기 어렵다. 이와 같은 이유로 디지털 홀로그램이 여러 분야에 응용되는 것이 어렵다. 영차 회절광 제거를 위하여 많은 노력이 이루어져 왔다. 본 연구에서는 영차 회절광의 영향을 줄이기 위한 홀로그램 데이터를 스캐닝 방법으로 획득하여 수치적 처리를 통하여 영상을 재현하는 실험 연구를 하였다. 그 결과 본 연구에 사용된 방법이 영차 회절광의 효과를 줄이면서 해상도도 유지 할 수 있는 방법임을 알았다.