• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.393-395
• /
• 2003

The changes of DEMs(Digital Elevation Models) will be detected to correct the information of DEMs and/or to get the information about themselves. This study suggests the evaluation of DEM using correlation coefficient value between the target and the reference DEMs for detect the changes.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.173-178
• /
• 2004

This paper presents photogrammetric processing to generate digital elevation models and deals with the accuracy potential of SPOT-5 HRG supermode imagery for DEM generation. The DEMs obtained from digital topographic maps of 1/5000 scale were used as the refernce DEM data. DEMs extracted from HRG dats were compared with digital topograpic map DEMs on severed test sections. And digital surface model(DSM), refering to above the ground like buildings, was produced about the test built-up area.

• Korean Journal of Geomatics
• /
• 제3권2호
• /
• pp.107-114
• /
• 2004

The National Geographic Information Institute (NGII) in korea, through the National Geographic Information System (NGIS) Program, has prepared to generate and disseminate digital elevation data for Korea. This is a pilot research to propose a policy for production, maintenance, and supply of Korea Digital Elevation Data(KDED). Customer demands for accuracy and resolution of DEM was surveyed through a questionnaire. In order to investigate the quality, the technical efficiency and the production cost, a tentative DEM in a small test site was generated based on digital topographic maps (original paper map scale 1:5,000), analytical plotter, and LIDAR. The Accuracy standard for KDED was derived based on source data generation methods. As a result of this research, a uniformly spaced grid model was recommended for KDED. Its preferable grid space is 5m in urban areas and its vicinity, and 10m in field and mountainous area. LIDAR has been valuated as a proper KDED generation method fulfilling customers' demands for the accuracy.

• 한국환경과학회지
• /
• 제25권8호
• /
• pp.1165-1176
• /
• 2016

The accuracy of digital elevation models (DEMs) is crucial for properly estimating flood inundation area. DEM pixel size is especially important when generating flood inundation maps of small streams with a channel width of less than 50 m. In Korea, DEMs with large spatial resolutions of 30 m have been widely applied to generate flood inundation maps, even for small streams. Additionally, when making river master plans, field observations of stream cross-sections, as well as reference points in the middle of the river, have not previously been used to enhance the DEM. In this study, it was graphically demonstrated that high-resolution DEMs can increase the accuracy of flood inundation mapping, especially for small streams. Also, a methodology was proposed to modify the existing low-resolution DEMs by adding additional survey reference points, including river cross-sections, and interpolating them into a high spatial resolution DEM using the inverse distance weighting method. For verification purposes, the modified DEM was applied to Han stream on Jeju Island. The modified DEM showed much better accuracy when describing morphological features near the stream. Moreover, the flood inundation maps were formulated with the original 30 m pixel DEM and the modified 0.1 m pixel DEM using HEC-RAS modeling of the actual flood event of Typhoon Nari, and then compared with the flood history map of Nari. The results clearly indicated that the modified DEM generated a similar inundation area, but a very poor estimate of inundation area was derived from the original low-resolution DEM.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.931-938
• /
• 2006

Using high resolution stereoscopic imaging system three digital elevation model of tunnel face is acquired. The images oriented within a given tunnel coordinate system are brought into a stereoscopic vision system enabling three dimensional inspection and evaluation. The possibilities for the prediction ahead and outside of tunnel face have been improved by the digital vision system with 3D model. Interpolated image structures of rock mass between subsequent stereo images will enable to model the rock mass surrounding the opening within a short time at site. The models shall be used as input to numerical simulations on site, comparison of expected and encountered geological conditions, and for the interpretation of geotechnical monitoring results.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.142-142
• /
• 2021

An arbitrary representation of an urban drainage sewer system was devised using a geographic information system (GIS) tool in order to calculate the surface and subsurface flow interaction for simulating urban flood. The proposed methodology is a mean to supplement the unavailability of systematized drainage system using high-resolution digital elevation(DEM) data in under-developed countries. A modified DEM was also developed to represent the flood propagation through buildings and road system from digital surface models (DSM) and barely visible streams in digital terrain models (DTM). The manhole, sewer pipe and storm drain parameters are obtained through field validation and followed the guidelines from the Plumbing law of the Philippines. The flow discharge from surface to the devised sewer pipes through the storm drains are calculated. The resulting flood simulation using the modified DEM was validated using the observed flood inundation during a rainfall event. The proposed methodology for constructing a hypothetical drainage system allows parameter adjustments such as size, elevation, location, slope, etc. which permits the flood depth prediction for variable factors the Plumbing law. The research can therefore be employed to simulate urban flood forecasts that can be utilized from traffic advisories to early warning procedures during extreme rainfall events.

• 한국측량학회지
• /
• 제24권2호
• /
• pp.153-158
• /
• 2006

새로운 HRG(High Resolution Geometric) 영상 장치는 CNES에 의해 개발된 SPOT 5 위성의 고해상도 관측 센서이다. HRG 장치는 SPOT 1 - 4 위성들에 탑재된 HRV/HRVIR 보다 진보된 높은 지상 해상도로 영상을 얻는다. HRG의 관측폭은 다른 SPOT 위성들과 같은 60km이며, 두 개의 HRC 장치는 5m 공간해상도로 최대폭 120km까지 영상을 획득할 수 있다. 위성의 입체 영상으로부터 DEM을 생성하는 방법은 지형도와 항공사진을 이용한 DEM 생성의 연장선상에 있다. 위성영상의 광범위 관측능력은 동일한 지역에 대한 빠른 자료 처리를 가능하게 한다. 이 연구에서는, 제천 지역에 대한 SPOT 5/HRG 입체 영상을 이용하여 DEM을 생성하기 위해 LPS의 OrthoBASE Pro 툴을 사용하였다. 결과로 얻어진 DEM은 수치지형도의 등고선으로부터 획득된 참조 DEM과 비교분석을 수행하였다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2005년도 추계 종합학술대회 논문집
• /
• pp.335-339
• /
• 2005

사진측량학적 처리에 의하여 SPOT 5호 HRG supermode 영상으로부터 수치고도모형(DEM)을 생성하였다. 생성된 DEM의 정착도를 분석하기 위하여 1/5000 축척의 수치지형도로부터 기준 DEM을 작성하고 설정한 여러 시험구간상에서 비교하였다. 또한 수치표면모형(DSM)과 3D 건물모델링을 행하였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 Korea-Russia Joint Conference on Geometics
• /
• pp.73-81
• /
• 2004

National Geographic Information Institute (NGII) in Korea, through National Geographic Information System (NGIS) Program, has prepared to generate and disseminate digital elevation data for Korea. This is a pilot research to propose a policy for generation, maintenance, and supply of Korea Digital Elevation Data (KDED). Customer demands for accuracy and resolution of DEM was surveyed through questionnaire. In order to investigate the quality, the technical efficiency and the production cost, a tentative DEM in a small test site was generated based on digital topographic maps (original paper map scale 1 :5,000), analytical plotter, and LIDAR. Accuracy standard for KDED was derived based on source data and generation methods. As results of this research, we recommend uniformly spaced grid model for KDED. Its preferable grid space is 5m in urban and its vicinity; and 10m in field and mountainous area. LIDAR has been valuated as a proper KDED generation method fulfilling customers demand for the accuracy.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권5호
• /
• pp.226-232
• /
• 2001

The ability to efficiently and robustly recover accurate 3D terrain models from sets of stereoscopic images is important to many civilian and military applications. To develop an effective and practical terrain modeling system, we propose a new multi-image stereo method which detect unreliable elevations in DEM(Digital Elevation Map), and fuse several DEMs from multiple sources into an accurate and reliable results. This paper focuses on two key factors for generating robust 3D terrain models: the ability to detect unreliable elevation estimates and the ability to fuse the reliable elevations into a single optimal terrain model. We apply the self-consistency methodology to reconstruct accurate DEM from multi-image and show the method is more effective than the conventional stereo image 3D reconstruction method. Using photo-realistic simulator, four synthetic image are generated from ground truth DEM and orthoimage to evaluate the accuracy of the proposed method quantitatively.