• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.1
• /
• pp.37-44
• /
• 2003

In this paper, a technique to estimate EMI source distribution on a digital circuit board ir introduced. A sensitivity analysis method is applied to reconstruct the source distribution from measured electric field data. Results from a single-layer measurement and a double-layer measurement are compared. It will be shown, from the simulation, that the use of sensitivity analysis for the EMI source reconstruction problem can be a very promising technique.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.11a
• /
• pp.746-751
• /
• 2001

본 논문에서는 디지털 논리회로에 대하여 인터넷을 기반으로 가상교육 및 실험실습이 가능한 멀티미디컨텐츠를 개발하였다. 가상강의를 위한 컨텐츠들은 WMT 기술 및 애니메이션이 포함된 파워포인트 자료로 구성된 화상강의 모들과 개념이해를 위한 플래쉬 및 회로실험을 위한 자바 프로그램들로 구성되었다. 또한 웹 상에서의 가상 실험실을 구현하기 위해 임의의 디지털 논리회로 설계 및 검증을 위한 LogicSim 프로그램과 실험기관과 IC 칩 등을 이용한 임의회로의 가상실험 프로그램인 BreadBoard 등을 개발하였고 웹 상에서의 리포트 작성, 제출 및 검사가 가능한 Report 프로그램, 이론 학습 및 가상실험 보조 유틸리티 프로그램들을 개발하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.320-323
• /
• 2011

최근 전자기술의 발달로 인해 인쇄 회로 기판(Printed Circuit Board)이 정밀화되고 세분화됨에 따라 고도로 집약되어 육안에 의한 시각검사 방법이 어려워지고 있다. 이에 따라 컴퓨터 시각 기술을 이용한 자동시각검사가 점차 늘어가는 추세다. 이러한 PCB의 설계 또는 검사 시 참조할 이미지를 만드는 방법 중 하나로 Gerber Interface로 표현된 PCB용 CAD파일인 거버파일을 이용하여 디지털 이미지를 생성하는 법이 널리 이용되고 있다. 반면 이러한 파일 및 이미지는 상호간에 인과관계(causality)를 가지며, 이미지 유출시 그 피해가 크다. 따라서 생성된 이미지를 효과적으로 보호하고 관리해야할 필요가 있다. 본 논문에서 상기의 인과관계를 이용하여 이를 관리하고 보호하는 이미지 권한관리 기법을 제안한다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2002.08a
• /
• pp.6-9
• /
• 2002

In this paper a technique to estimate EMI source distribution on a digital circuit board is introduced. A sensitivity analysis method is applied to reconstruct the source distribution from measured electric field data. Results from a single-layer measurement and a double-layer measurement are compared. It will be shown, from the simulation, that the use of sensitivity analysis for the EMI source reconstruction problem can be a very promising technique.

• Tribology and Lubricants
• /
• v.29 no.2
• /
• pp.77-84
• /
• 2013

A small engine-oil-deterioration detection sensor was developed and installed at the tip of a dipstick gage. The sensor part was manufactured using printed circuit board (PCB) manufacturing technology. A set of sensor covers was installed in order to protect the sensor and realize good signal stability. The small engine-oil-deterioration detection sensor system comprised a dual sensor having etched copper electrodes coated with gold and ceramic, a flexible PCB (FPCB) acting as electric wire, and a dummy PCB with only a lock connector. The sensor can easily be installed by insertion through the guide tube of a dipstick gage. Thus, a driver can easily handle it without further installation equipment. The sensor can determine the level of deterioration in the engine oil by estimating the corresponding dielectric constant of the engine oil.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.324-327
• /
• 2002

For the characterization of arbitrary shaped printed circuit board, lossy transmission line grid model based on SPICE netlist and analytical plane model based on the segmentation method are proposed in this paper. Two methods are compared with an arbitrary shaped power/ground plane. Furthermore, design considerations for the complete power distribution network structure are discussed to ensure the maximum value of the PDN impedance is low enough across the desired frequency range and to guide decoupling capacitor selection.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.1
• /
• pp.54-59
• /
• 2002

In the three-axis control of satellites by using on-board actuators, gyros are usually used to measure the attitude angles and angular rates. The gyros are operated by electronic parts and mechanical actuators. The digital components of the electronic parts consist of largely FPGA (Field Programmable Gate Array) as one of the methods for VLSI(Very Large Scale Integrated) circuit design, while the mechanical parts provide output signal directly by mechanical actuation of a spinning rotor. In this research, a mixed mode of gyro is implemented in FGA. In addition to the hardware implementation, the simulation study was conducted by using the SABER for the mixed mode simulator. Results for the practical implementation of the satellite ACS (Attitude Control System) interfaced with the data processing are also presented to validate the FPGA implementation.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.106-109
• /
• 2000

The diode characteristics for therapy radiation sensor have been studied by irradiating therapy radiation from the MM22 microtron accelerator. Signal processing has been performed in the pulse mode which can process the signal fast. We have designed integrator, peak detector and synchronization circuit to detect diode signal in the pulse mode for implementation of portal image. We also read the diode signal by A/D board and displayed the peak value with LabView program. Because the quality of portal image obtained by film in the case of therapy radiation is much worse than that of diagnostic film, Digital radiography system by rectifier diode detector was suggested for portal Image.

• Nuclear Engineering and Technology
• /
• v.44 no.4
• /
• pp.363-368
• /
• 2012

A feedwater controller targeted for an ABWR has been implemented using a modern field programmable gate array (FPGA), and verified using the full scope simulator at Taipower's Lungmen nuclear power station. The adopted control algorithm is a rule-based fuzzy logic. Point to point validation of the FPGA circuit board has been executed using a digital pattern generator. The simulation model of the simulator was employed for verification and validation of the controller design under various plant initial conditions. The transient response and the steady state tracking ability were evaluated and showed satisfactory results. The present work has demonstrated that the FPGA based approach incorporated with a rule-based fuzzy logic control algorithm is a flexible yet feasible approach for feedwater controller design in nuclear power plant applications.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.789-795
• /
• 2011

This paper aims to develop authoring tools and services platform that can be Immediate response through supervisor's intuitive understanding based 3d-Building Information mode about overall security situation of building by mapping many CCTV images on 3D space information from traditional observation way that make simply visualize CCTV images on the Situation Board.