• ETRI Journal
• /
• 제33권1호
• /
• pp.121-124
• /
• 2011

Digital harmonics, which may reduce the radio frequency sensitivity of a system, can be coupled with an antenna in a mobile handset. This letter presents a decoupling method for increasing the isolation between digital harmonics on a flexible printed circuit board (FPCB) and an antenna in terms of the ground mode current and the concept of reaction. We model the signal and ground lines in an FPCB as a loop circuit exciting a ground mode current and demonstrate a simple but efficient decoupling method for reducing the excited ground mode current.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.577-579
• /
• 2004

Digital hearing aids enclose $6{\sim}8$ tiny components. Those electromechanical components are individually wired by soldering which is a manual labor and sometimes causes components' damage by heating. This paper suggests a PCB design for overcome these problems. Several PCBs are designed and manufactured and circuited to produce ITE(In The Ear) type hearing aids which are inserted in the ear canal. The most optimal size of the PCB design for the ITE hearing aid is presented in this paper.

• 전자공학회논문지A
• /
• 제28A권9호
• /
• pp.700-707
• /
• 1991

Transmission line crosstalk of a printed circuit baord terminated with the linear resistive and nonlinear terminal network is analyzed. Based on a quasi-static approximation, crosstalk voltage is computed in frequency domain by applying the modal analysis. A scheme to calculate the maximum crosstalk voltage for a line terminated with the nonlinear digital gate is proposed. And also, crosstalk quantities are numerically obtained for the microstrip and strip line, and compared with the experimental data to validate relevance of this method.

• 마이크로전자및패키징학회지
• /
• 제6권4호
• /
• pp.73-77
• /
• 1999

Revolutionary changes on multimedia, network and PDA(Personal digital assistants) causes PCB(Printed circuit beard) manufacturers to change their attitudes to product. Traditional idea for current market such as price, market, and service has collapsed down and new digitalization urges PCB manufacturers to deal with new technologies, shorter lead time with reasonable price, high qualities. Therefore PCB manufacturers have an effort to develop new marketing, products, processes for low cost to keep up pace with assembly makers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.96-98
• /
• 2002

This paper proposes the digital pin line checker which can extremely improve the efficiency of the pine line checking using a micro processor. The line checker is designed which can check efficiently up to maximum 2048 pin. Alarm busser is designed ringing real-timely the case that the pin line is connected differently with real node number. Accordingly the comparing and identifying work visually the node number showing on the displaying board with real node number is avoided after the electronic stimulus enforce to the pin of the fixture by the test engineer. The digital line checker is designed based on the 8051. And the effectiveness and accuracy of the proposed line checking strategy is tested by simulating the several error connections for pin lines on the small scale board.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1517-1518
• /
• 2006

This paper describes the design and fabrication of a partial discharge(PD) analyzer to evaluate insulation performance for low-voltage electrical and electronic devices. The analyzer consists of an adjustable AC power supply, a coupling network, an amplifier, a shielding encloser, a sample-hold (S/H) circuit and a data acquisition (DAQ) board. The analyzer holds the height of PD pulse for $10{\mu}s$ by the S/H circuit, and this makes possible to measure PD pulses having fast rise and short duration by a low speed analog-to-digital (A/D) converter. The data are transmitted to the personal computer through the DAQ board, and the designed analysis program calculate apparent charges, discharge inception and extinction voltages.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2717-2719
• /
• 2003

In this paper, we developed an efficient virtual experiment kit with creative and interactive multimedia contents, which can be used to enhance the quality of education in the area of digital logic circuits. Since our virtual experiment kit is implemented to describe the on-campus laboratory, the learners can obtain similar experimental data through it. Also, our web-based virtual experiment kit is designed to enhance the efficiency of both the learners and the educators. The learners will be able to achieve high learning standard and the educators save time and labor. The virtual experiment is performed according to the following procedure: (1) Circuit Composition on the Bread Board (2) Applying Input Voltage (3) Output Measurements (4) Checkout of Experiment Results. Furthermore, the circuit composition on the bread board and its corresponding online schematic diagram are displayed together on the virtual experiment kit for the learner's convenience. Finally, we have obtained several affirmative effects such as reducing the total experimental hours and the damage rate for experimental equipments and increasing learning efficiencies as well as faculty productivity.

• 전기전자학회논문지
• /
• 제7권2호
• /
• pp.245-252
• /
• 2003

디지털 보정 기능을 갖는 CMOS 압력 센서의 인터페이스 회로를 설계하였다. 인터페이스 회로는 아날로그 부분과 디지털 부분으로 구성되어 있다. 아날로그 부분은 센서로부터 발생한 약한 신호를 증폭시키는 역할을 담당하고 디지털 부분은 온도 보상 및 오프셋 보정 기능을 담당하며 센서 칩과 보정을 조정하는 마이크로컨트롤러와의 통신을 담당한다. 디지털 부분은 I2C 직렬 인터페이스, 메모리, 트리밍 레지스터 및 제어기로 구성된다. I2C 직렬 인터페이스는 IO 핀 수 및 실리콘 면적 면에서 실리콘 마이크로 센서의 요구에 맞게 최적화 되었다. 이 설계의 주요 부분은 최적화된 I2C 프로토콜을 구현하는 제어 회로를 설계하는 것이다. 설계된 칩은 IDEC의 MPW를 통하여 제작되었다. 칩의 테스트를 위하여 테스트 보드를 제작하였으며 테스트 결과 예상한대로 디지털 보정기능이 잘 수행됨을 확인하였다.

• 조명전기설비학회논문지
• /
• 제24권4호
• /
• pp.1-9
• /
• 2010

LED구동회로및 제어회로를 개발하였다. 개발된 LED구동회로는 새로운 PWM회로를 가지고 있으며 LED열의 디밍, 전류 및 온도제어 및 통신 기능을 할 수 있다. 개발된 PWM회로는 기본적인 디지털 논리소자를 사용하여 만들어 질 수 있는 두 개의 링 발진기와 한 개의 카운터로 구성되어 있다. 부가적으로 이 회로는 온-오프 제어 모드, 비상모드, 전력절감모드를 가지고 있으며 직열통신을 이용해서 제어된다. 설계 된 PWM 발생기와 제어회로는 마그나칩/하이닉스의 디지털 공정을 이용하여 제작되었다. 제작된 칩은 LED구동장치와 제어기 보드에 장착되어 테스트 되었으며 성공적으로 동작하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2008년도 추계학술발표논문집
• /
• pp.60-62
• /
• 2008

본 논문에서는 PCB(Printed Circuit Board) 기판의 내부에 만들어지는 임베디드 캐패시터에서 정전용량 밀도를 높이고 고주파 특성을 향상시키기 위한 방안을 연구하였다. 전극의 형태 및 유전체와의 적층구조를 변형하면서 임베디드 캐패시터의 특성변화를 분석하였으며, 이를 통하여 정전용량 밀도 및 고주파 특성을 개선할 수 있었다.