• Journal of Broadcast Engineering
• /
• v.11 no.1 s.30
• /
• pp.80-90
• /
• 2006

A simple 2D gaze tracking method using single camera and Purkinje image is proposed. This method employs single camera with infrared filter to capture one eye and two infrared light sources to make reflection points for estimating corresponding gaze point on the screen from user's eyes. Single camera, infrared light sources and user's head can be slightly moved. Thus, it renders simple and flexible system without using any inconvenient fixed equipments or assuming fixed head. The system also includes a simple and accurate personal calibration procedure. Before using the system, each user only has to stare at two target points for a few seconds so that the system can initiate user's individual factors of estimating algorithm. The proposed system has been developed to work in real-time providing over 10 frames per second with XGA $(1024{\times}768)$ resolution. The test results of nine objects of three subjects show that the system is achieving an average estimation error less than I degree.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.2
• /
• pp.49-60
• /
• 2007

The alpine agricultural activities are usually performed at higher and steep areas in nature. Thus, significant amounts of soil erosion are occurring compared with those from other areas. Thus, the soil erosion induced environmental impacts in these areas are getting greater. The Doam watershed is located at alpine areas and it has been well known that the agricultural activities in the watershed are causing accelerated soil erosion and water quality degradations. Many modeling approaches were employed to solve soil erosion and water quality issues. In this study, the Soil and Water Assessment Tool (SWAT) model was utilized to simulate the hydrologic and sediment behaviors in the Doam watershed. In many previous modeling studies, the digital soil map and its corresponding soil properties were used without modification to reflect soil conditioning at many agricultural fields of the Doam watershed. Thus, the soil sample was taken at the agricultural field within the Doam watershed and analyzed for its physical properties. In this study, the digital topsoil properties in the agricultural fields within the Doam watershed were replaced with the soil properties for reconditioned soil analyzed in this study to simulate the impacts of using soil properties for reconditioned soil in hydrologic and sediment modeling at the Doam watershed using the SWAT model. The hydrologic component of the SWAT model was calibrated and validated for measured flow data from 2002 to 2003. The $R^2$ value was 0.79 and the EI value was 0.53 for weekly simulated data. The calibrated model parameters were used for hydrologic component validation and the $R^2$ value was 0.86 and the EI value was 0.74 for weekly data. For sediment comparison, the $R^2$ value was 0.67 and the EI value was 0.59. These statistics improved with the use of soil properties of the reconditioned soil in the field compared with the results obtained without considering soil reconditioning. The simulated sediment amounts with and without considering the soil properties of the reconditioned soil were 284,813 ton and 158,369 ton, respectively. This result indicates that there could be approximately 79% of errors in estimated sediment yield at the Doam watershed, although the model comparison with the measured data gave similar satisfactory statistics with and without considering soil properties from the reconditioned soil.

• Journal of Digital Contents Society
• /
• v.18 no.7
• /
• pp.1377-1386
• /
• 2017

We propose a smart ocean meteorological observation system which is capable of real-time measurement of vulnerable marine climate and oceanographic conditions. Besides, imported products have several disadvantages such that they can't be measured for a long time and can't transmit data in real time. In the proposed system, smart ocean observation digging system, it observes real-time ocean weather with data logger methods. Furthermore, we also use existing dataloggers functions with various sensors which are available in the ocean at the same time. Also, we applied the Kalman-filter algorithm to the ocean crest measurement to reduce the noise and increase the accuracy of the real-time wave height measurement. In the experiment, we experimented the proposed system with our proposed algorithms through calibration devices in the real ocean environment. Then we compared the proposed system with and without the algorithms. As a result, the system developed with a lithium iron phosphate battery that can be charged by a system used in the ocean and minimized power consumption by using an RTC based timer for optimal use. Besides, we obtained optimal battery usage and measured values through experiments based on the measurement cycle.

• Journal of the Korea Computer Graphics Society
• /
• v.18 no.2
• /
• pp.1-8
• /
• 2012

High dynamic range (HDR) images represent a far wider numerical range of exposures than common digital images. Thus it can accurately store intensity levels of light found in the specific scenes generated by light sources in the real world. Although a kind of professional HDR cameras which support fast accurate capturing has been developed, high costs prevent from employing those in general working environments. The common method to produce a HDR image with lower cost is to take a set of photos of the target scene with a range of exposures by general purpose cameras, and then to transform them into a HDR image by commercial softwares. However, the method needs complicate and accurate camera calibration processes. Furthermore, creating HDR environment maps which are used to produce high quality imaging contents includes delicate time-consuming manual processes. In this paper, we present an automatic HDR panorama environment map generating system which was constructed to make the complicated jobs of taking pictures easier. And we show that our system can be effectively applicable to photo-realistic compositing tasks which combine 3D graphic models with a 2D background scene using image-based lighting techniques.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.2 no.1
• /
• pp.9-15
• /
• 2000

The objective of this study is to evaluate the use of RADARSAT and Landsat TM data for the monitoring of rice growth. The relationships between backscatter coefficients($\sigma$$^{0}$ ) of RADARSAT data and digital numbers (DN) of Landsat TM and rice growth parameters were investigated. Radar backscatter coefficients were calculated by calibration process and then compared with rice growth parameters; plant height, leaf area index (LAI), and fresh and dry biomass. When radar backscatter coefficient ($\sigma$$^{0}$ ) of rice was expressed as a function of time, it is shown that the increasing trend ranged from -22--20dB to -9--8dB as growth advances. The temporal variation of backscatter coefficient was significant to interpret rice growth. According to the relationship between leaf area index and backscatter coefficient, backscatter coefficient underestimated leaf area index at the beginning of life history and overestimated, at the reproductive stage. The same increasing trend between biomass and backscatter coefficient was shown. From these results, RADARSAT data appear positive to the monitoring of rice growth. Each band of time-series Landsat TM data had a significant trend as a rice crop grows during its life cycle. Spectral indices, NDVI[(TM4-TM3)/(TM4+TM3)] and RVI(TM4/TM2), derived from Landsat TM equivalent bands had the same trend as leaf area index.

• Journal of the Korea Concrete Institute
• /
• v.24 no.2
• /
• pp.205-214
• /
• 2012

Crack widths play an important role in the serviceability limit state. When crack widths are controlled sufficiently, the reinforcement corrosion can be reduced using only existing concrete cover thickness due to low permeability in the region of finely distributed hair-cracks. Thus, the knowledge about the tensile crack opening is essential in designing more durable concrete structures. Therefore, numerous researches related to the topic have been performed. Nevertheless accurate measurement of a crack width is not a simple task due to several reasons such as unknown potential crack formation location and crack opening damaging strain gages. In order to overcome these difficulties and measure precise crack widths, a displacement measurement system was developed using digital image correlation. Accuracy calibration tests gave an average measurement error of 0.069 pixels and a standard deviation of 0.050 pixels. Direct tensile test was performed using ultra high performance concrete specimens. Crack widths at both notched and unnotched locations were measured and compared with clip-in gages at various loading steps to obtain crack opening profile. Tensile deformation characteristics of concrete were well visualized using displacement vectors and full-field displacement contour maps. The proposed technique made it possible to measure crack widths at arbitrary locations, which is difficult with conventional gages such as clip-in gages or displacement transducers.

• Journal of Digital Convergence
• /
• v.10 no.7
• /
• pp.201-206
• /
• 2012

Benzo(a)pyrene is a polycyclic aromatic hydrocarbons (PAHs) whose metabolites are mutagenic and highly carcinogenic and is listed as a Group 1 carcinogen by the IARC. It has been found at variable concentrations in several foods and is associated with several factors during the process including contaminated raw materials, exposure of environment, and procedure of process or cooking. In this study, benzo(a)pyrene in 45 oriental medicines were determined by HPLC/FLD. The calibration curves of benzo(a)pyrene was linear over the concentration range of 0.5~40 ng/mL with correlation coefficient of above 0.999. The limit of detection (LOD) and limit of quantitation (LOQ) of benzo(a)pyrene were 0.04 and 0.10 ${\mu}g/kg$. Benzo(a)pyrene in 3 samples out of 45 samples was not detected. The level of benzo(a)pyrene in 26 (57.7%), 8 (17.8%) and 7 (15.6%) samples was 0.1~0.5, 0.5~1.0 and 1.0~5.0 ${\mu}g/kg$, respectively. Especially, content of benzo(a)pyrene in Coptis Rhizome is the highest (5.97 ${\mu}g/kg$). In conclusion, these results suggest that could be applied to fundamental study and guideline on drying condition to decrease content of benzo(a)pyrene in oriental medicine.

• Korean Journal of Remote Sensing
• /
• v.28 no.2
• /
• pp.191-202
• /
• 2012

A high resolution satellite imagery such as KOMPSAT-2 includes a material containing rational polynomial coefficient (RPC) for three-dimensional geopositioning. However, image geometries which are calculated from the RPC must have inevitable systematic errors. Thus, it is necessary to correct systematic errors of the RPC using several ground control points (GCPs). In this paper, we propose an efficient method for automatic correction of image geometries using tie points of a stereo pair and the Shuttle Radar Topography Mission (SRTM) Digital Elevation Model (DEM) without GCPs. This method includes four steps: 1) tie points extraction, 2) determination of the ground coordinates of the tie points, 3) refinement of the ground coordinates using SRTM DEM, and 4) RPC adjustment model parameter estimation. We validates the performance of the proposed method using KOMPSAT-2 stereo pair. The root mean square errors (RMSE) achieved from check points (CPs) were about 3.55 m, 9.70 m and 3.58 m in X, Y;and Z directions. This means that we can automatically correct the systematic error of RPC using SRTM DEM.

• Journal of Digital Convergence
• /
• v.17 no.10
• /
• pp.373-379
• /
• 2019

Polymethyl methacrylate (PMMA), a self-polymerizing resin for removable orthodontic devices, has been used as a dental orthodontic device for many years because of its advantages such as color stability, volume stability, and tissue compatibility. However, such a removable orthodontic device has a disadvantage that the longer the use in the oral cavity due to the low strength of the PMMA fracture of the orthodontic device resin in use. In this study, zinc nanoparticles (ZNP) were mixed with orthodontic PMMA to introduce strength effect. Rectangular samples ($1.4{\times}3.0{\times}19.0mm$) of orthodontic PMMA (0, 0.5, 1.0, 2.0 and 4.0%) containing ZNP were prepared. The finished specimen was tested for three-point bending strength at a speed of 1 mm / min, and the Vickers hardness was measured three times using a hardness tester. The surface roughness was measured with a surface roughness. As a result, the 3-point bending strength did not change significantly (p>0.05). Surface energy increased significantly. As a result, we successfully synthesized ZNP in this study and prepared the dispersed resin specimen for calibration. It will be possible to develop high-density dental orthodontic resins.

• Journal of Digital Convergence
• /
• v.17 no.9
• /
• pp.185-192
• /
• 2019

The introduction of smart technology provides accuracy, safety, and efficiency to both physicians and patients. Although interest in a clear aligner is increasing among users worldwide, the current clear aligner requires a visit to the hospital every one or two weeks for replacement, which is a very cumbersome process. There is also confusion among dentists and patients because about 40 to 80 devices are made, and calibration is done based on the order and duration of the clear aligner. Therefore, this study designed and developed a clear aligner management system so that communication between the patient and dentist can be smoothly performed by inserting the QR code into the transparent correction device. As a result, the size of the QR code was recognized as $6{\ast}6mm^2$ which can be used in the oral and the recognition distance was 100% within 12 cm. Since the dentist can remotely manage the patient with the proposed system and improve the correction effect, it is possible to manage patients abroad, as well as domestically.