• Korean Journal of Materials Research
• /
• v.12 no.9
• /
• pp.696-700
• /
• 2002

The Ti-aluminide intermetallic compound was formed from high purity elemental Ti and Al foils by self-propagating, high-temperature synthesis(SHS) in hot press. formation of $TiAl_3$ at the interface between Ti and Al foils was controlled by temperature, pressure, heating rate, and so on. According to the thermal analysis, it is known in this study that the heating rate is the most important factor to form the intermetallic compound by this SHS reaction. The V layer addition between Al and Ti foils increased SHS reaction temperatures. The fully dense, well-boned inter-metallic composite($TiA1/Ti_3$Al) sheets of 700 m thickness were formed by heat treatment at $1000^{\circ}C$ for 10 hours after the SHS reaction of alternatively layered 10 Ti and 9 Al foils with the V coating layer. The phases and microstructures of intermetallic composite sheets were confirmed by EPMA and XRD.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.3
• /
• pp.258-261
• /
• 1989

The electrochemical behaviors of 4-(2)-thiazolylazo)-resorcinol (TAR) in acetonitrile solution was studied by DC polarography, cyclic voltammetry, controlled-potential coulometry and UV-Vis spectroscopy. The electrochemical reduction of TAR occurs in four-one electron reduction steps in acetonitrile solution. The products of the first and the third electron transfer are speculated to be a relatively stable anion radical. The second electron transfer to the dianion is followed by a chemical reaction producing a protonated species. The product of the fourth electron transfer also produces the corresponding amine compounds with a following reaction. Also every reduction wave was diffusion controlled. The first reduction wave is considerably reversible and the other waves are less reversible.

• Journal of the Korean Ceramic Society
• /
• v.36 no.6
• /
• pp.655-661
• /
• 1999

${\beta}$-SiC formation mechanism in Si melt-C-SiC system with varying in size of carbon source was investigated. A continuous reaction sintering process using Si melt infiltration method was adopted to control the reaction sintering time effectively. It was found that ${\beta}$-SiC formation mechanism in Si melt-C-SiC system was directly affected by the size of carbon source. In the Si melt-C-SiC system with large carbon source ${\beta}$-SiC formation mechanism could be divided into two stages depending on the reaction sintering time: in early stage of reaction sintering carbon dissolution in Si melt and precipitation of ${\beta}$-SiC was occurred preferentially and then SIC nucleation and growth was controlled by diffusion of carbon throughy the ${\beta}$-SiC layer formed on graphite particle. Furthmore a dissolution rate of graphite particles in Si melt could be accelerated by the infiltration of Si melt through basal plane of graphite crystalline.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.10 no.S_4
• /
• pp.173-179
• /
• 2001

The chemical behavior and properties of the redox state of environmental pollutants was investigated using electrochemical methods. The purpose was to measure the variations in the redox reaction of differential pulse polarograms and cyclic voltammograms. The results observed the influences on redox potential and current of various factors including concentration, temperature, salt, and pH. These were established factors as the effect of the redox reaction. It can be clearly recognized that the electrode reaction are from reversible to irreversible processes. Also, it was mixing with reaction current controlled.

• Journal of Environmental Science International
• /
• v.11 no.2
• /
• pp.131-137
• /
• 2002

The chemical behavior and properties on the redox state of environmental pollutant has been investigated by electrochemical methods. We carried out to measure the variations in the redox reaction of differential pulse polarogram and cyclic voltammogram. The results observed the influences on redox potential and current of various factors with temperature and pH. These were established factors as the effect of the redox reaction. It can be clearly recognized that the electrode reaction are from qusi-reversible to irreversible processes. Also, it was mixing with reaction current controlled. The bits-phenol A in the waste water was made to compound with cobalt ion and it take away from the separation into compound. The $Co(BPA)_2$ compound was not found to be dissociation in waste water. However, this compound is avery unstable(K=1.02) and for a while, it was to be a dissociation. Therefore, we believed that it was likely to a toxic substance.

• Journal of the Korean Chemical Society
• /
• v.6 no.2
• /
• pp.108-112
• /
• 1962

Lead ion gives a well-defined wave with $E_{1/2}$=-0.57V(vs. S.C.E.) from a base electrolyte consisting of 0.1M TEA=0.5M$KNO_3$=0.0002% methl red. (pH 9.8).The reduction wave of lead is lead(II) to lead(0) and electrode reaction of this wave diffusion controlled.Its diffusion current constant is 2.45 and temperature coefficient of this wave is about 1.2%.Under above conditions, diffusion current is proportional to the concentration of lead in the range of $10^{-3}$ ~$10^{-4}$ M.

• Membrane Journal
• /
• v.9 no.4
• /
• pp.240-244
• /
• 1999

Diagnostic membranes which were made of multi-layered gelatin films were prepared to measure the concentration of glucose in solution. It was found that the maximum diffusion rate of glucose had a linear relationship toward the glucose concentration. The effects of possible interferents in human blood on the reaction between glucose and reductive enzymes were examined. As a result, most of the interferents did not affect seriously on the maximum diffusion rate of glucose.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.2
• /
• pp.122-128
• /
• 1995

Sintered bodies were prepared from ${\alpha} - Al_2O_3/SiO_2$ composite powders which each alumina particles were surrounded by silica particles and investigated the mullitization behavior on the process of reaction - sintering. Mullitized reaction was started by formation of amorphous aluminosilicate inter - layer and proceeded by diffusion of alumina through this inter-layer. The growth of mullite was happened along the surface of alumina and controlled by the rate of diffusion.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.4
• /
• pp.360-364
• /
• 2000

We studied the degree of rancidity of linoleic acid for the electrochemical redox reaction in time course and the kinetic parameters. The current of the linoleic acid was increased and the potential was shifted to the positive potential when scan rates were faster. The redox reaction of the linoleic acid was proceeding to totally irreversible and diffusion controlled reaction. From these results, diffusion coefficient(D$\_$o/) of linoleic acid was observed to 2.61$\times$10$\^$-6/ ㎠/s in the 0.1 M TEAP/DMF electrolyte solution. Also, exchange rate constant(K$\^$o/) was observed to 9.79$\times$10$\^$-11/ cm/s. The leaving time in air condition was found to affect the rancidity. We predicted that the product was carbonyl compounds.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4035-4040
• /
• 2012

Presented study describes the synthesis of photo cross-linkable and water soluble hydroxyethyl starch hydroxyethyl methacrylate (HESHEMA) samples with different degree of substitution (DS) by functionalization of hydroxyethyl starch (HES) with hydroxyethyl methacrylate (HEMA) or hydroxyethyl methacrylate carbonylimidazole (HEMACI) in DMSO using two different routes. It was revealed that the reaction time for HESHEMA synthesis can be reduced from 5 days to 24 h by conducting the reaction at $80^{\circ}C$ instead of at room temperature. Solubility of HESHEMA was found to be dependent on DS which in turn was dependent on ratio between HES and HEMA or HEMACI. HESHEMA samples with DS > 0.24 depicted insoluble in water, whereas the samples with DS < 0.05 did not form appreciable gel. HESHEMA samples with appropriate DS were converted into hydrogels by cross-linking polymer chains under UV radiations and resulting HESHEMA hydrogels showed swelling up to 1200%. Application of HESHEMA in controlled drug delivery was investigated by diffusion based encapsulation of Ondansetron, a serotonin 5-$HT_3$ receptor antagonist drug, mainly used for nausea and vomiting treatment.