• Korean Journal of Materials Research
• /
• v.6 no.7
• /
• pp.678-683
• /
• 1996

In the fabrication processes of thin film thermoelectrics, a subsequent annealing treatment is inevitable to reduce the defects and residual stresses introduced during the film growth, and to make the uniform carrier concentration of the film. However, the diffusion-induced atomic redistribution and the broadening of p/n junction region are expected to affect the thermoelectric properties of thin film modules. The present study intends to investigate the diffusion at the p/n junctions of thermoelectric thin films and to relate it to the property changes. The film junctions of p-type(Bi0.5Sb1.5Te3)and n-type(Bi2Te2.4Se0.6)were prepared by the flash evaporation method. Aluminum thin layer was employed as a diffusion barrier between p-and n-type films of the junction. This was found to be an effective barrier by showing a negligible diffusion into both type films. After annealing treatment, the thermoelectric properties of p/n couples with aluminum barrier layer were accordingly retained their properties without any deterioration.

• Food Science of Animal Resources
• /
• v.32 no.3
• /
• pp.293-300
• /
• 2012

This study investigated the effects of a low-voltage ohmic heating process (2.5 and 3.8 V/cm) on the thawing characteristics and NaCl diffusion of pork. The thawing rate of pork was dependent on the applied voltages and brine salinities, and few differences were obtained in pork quality parameters (color, water-holding capacity, and shear force) regarding the different treatments. The NaCl concentration of pork after ohmic thawing was higher than that following brine-immersion thawing, however, the NaCl diffusion did not differ from when fresh meat was immersed in brine. For application of the ohmic process in fresh pork, various ohmic pulses were generated in order to prevent the meat from overheating, and the results indicated that the ohmic process was a better way to enhance NaCl diffusion compared with immersing pork at high temperature. Although the mechanisms involved in NaCl diffusion at low-voltage electric field strength were unclear, the present study demonstrated that the ohmic process has a potential benefit in the application of meat processing.

• Research in Community and Public Health Nursing
• /
• v.28 no.2
• /
• pp.129-143
• /
• 2017

Purpose: The purpose of this study is to explore factors which influence adoption, implementation and continued use of tele-healthcare systems. Methods: Qualitative research was conducted by in-depth interviews with 17 professionals from various fields of organizations involved in developing and implementing tele-healthcare systems. Data were analysed thematically, using a conceptual model of diffusion of innovations. Results: The system users were reacted positively to the 3 attributes out of 9 which decided the adoption of innovation. In addition, it is required to redesign the tele-health care system simpler and easier so that the system users can access to the system much more easily regardless of space and time limitations. From the design stage on an individual level, it is necessary to conduct detailed needs analysis and listen to users who are at the center of innovation diffusion. On an organizational level, it is necessary to actively prepare for possible problems during system implementation, educate the users and build communication channels continuously. Conclusion: This study has identified the factors affecting the innovation of tele-health care systems and contributed to the understanding of the operation of tele-health care systems by the diffusion of innovation theory in community health posts.

• International Journal of Contents
• /
• v.15 no.2
• /
• pp.1-12
• /
• 2019

Despite their various similarities, Seoul's' Gangnam and Seocho districts showed different patterns in the adoption of the RFID household-based waste charging system. Gangnam, one of the 25 wealthiest districts in Seoul, first adopted the RFID system in 2012, but decided abandon it a year later due to inconvenience, sanitation, budget limitations, and management related issues. Unlike Gangnam, Seocho, a largely similar district to Gangnam, started to implement the RFID system in 2015 and successfully adopted this innovation. In this paper, we explain the adoption behaviors of these two districts using a Technology Hype Curve Model with 5 stages. Unlike traditional technology adoption theory, the Hype Curve Model concentrates on the big chasm between early majorities and late majorities, which is a core reason for discontinuity in innovation diffusion. Based on our case study result, the early majority easily gave up adoption due to immature technological and institutional infrastructure. However, Seocho district, who waited until the deficiencies had been sufficiently fixed since late majorities, succeeded at incremental diffusion. Since its invention by Gartner cooperation, the Hype Curve Model has not received enough attention in academia. This paper demonstrates its explanatory power for innovation diffusion. Similarly, this paper focuses on the importance of institutional framework in the diffusion of innovation. Lastly, we compare the behavior of two local governments in supporting and diffusing RFID systems to draw relevant policy implications for innovation diffusion.

• Journal of Biomedical Engineering Research
• /
• v.37 no.2
• /
• pp.84-89
• /
• 2016

In this study, we proposed ameliorated method for region of interest (ROI) study to improve its accuracy using partial volume effect (PVE). PVE which arose in volumetric images when more than one tissue type occur in a voxel, could be used to reduce an amount of gray matter and cerebrospinal fluid within ROI of diffusion tensor image (DTI). In order to define ROIs, individual b0 image was spatially aligned to the JHU DTI-based atlas using linear and non-linear registration (http://cmrm.med.jhmi.edu/). Fractional anisotropy (FA) and mean diffusivity (MD) maps were estimated by fitting diffusion tensor model to each image voxel, and their mean values were computed within each ROI with PVE threshold. Participants of this study consisted of 20 healthy controls, 27 Alzheimer's disease and 27 normal-pressure hydrocephalus patients. The result showed that the mean FA and MD of each ROI were increased and decreased respectively, but standard deviation was significantly decreased when PVE was applied. In conclusion, the proposed method suggested that PVE was indispensable to improve an accuracy of DTI ROI study.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.25 no.2
• /
• pp.23-31
• /
• 2000

Many studies in marketing and economics have attempted to model price and sales path under the dynamic diffusion process. Most of these models have been based on a fixed product lifetime. The current business climate requiring intensive development of new products however affects the diffusion of new products and their lifetime. Many products have not enjoyed the expected life cycle at the launching stage due to intense technical development competitive reactions, and financial problems. Most diffusion models however have not taken account of the lifetime uncertainty of new product. If the products do not last over the planning horizon set by those models. the optimal price derived from them could be futile. Therefore we had better take such lifetime uncertainty into consideration when developing diffusion models, In this paper we study the impact of uncertain product lifetime on its optimal pricing path in non-competitive market. We develop an optimal pricing model under uncertain product lifetimes and conduct a simulation study to investigate their effects on the optimal pricing and corresponding sales paths. The simulation study provides some interesting findings on optimal pricing policy under uncertain product lifetime. This study could be a stepping stone for the further extended study of optimal pricing strategy with uncertain product lifetime.

• The Journal of Korean Physical Therapy
• /
• v.32 no.6
• /
• pp.388-390
• /
• 2020

Objectives: The nigrostriatal tract (NST) connect from the substantia nigra pars compacta to the striatum. A few previous studies have reported on the NST in the Parkinson's disease using a proboblistic tractography method. However, no study has been conducted for identification of the NST using streamline DTT technique. In the current study, we used streamline DTI technique to investigate the reconstruction method and characteristics of the NST in normal subjects. Methods: Eleven healthy subjects were recruited in this study. The NST from the substantia nigra of the midbrain and the striatum of basal ganglia was reconstructed using DTI data. Fractional anisotropy, apparent diffusion coefficient (ADC) values and fiber numbers of the NST were measured. Results: In all subjects, the NST between the substantia nigra of the midbrain and the striatum. Mean values for FA, ADC, and tract volume were 0.460, 0.818, and 154.3 in the right NST, and 0.485, 0.818, and 176.3 in the left NST respectively. Conclusions: we reconstructed the NRT from the substantia nigra of the midbrain and the striatum of the basal ganglia using streamline tractography method. We believe that the findings and the proposed streamline reconstruction method of this study would be useful in future researches on the NST of the human brain.

• Knowledge Management Research
• /
• v.20 no.2
• /
• pp.87-103
• /
• 2019

The purpose of this study was to explore the factors influencing acceptance (e.g., comprehension,) and diffusion of information recipients' by depending on the authenticity of news. Specifically, this study has examined the effects of the news contents(political vs. general), need for cognition(high vs. low) and authenticity of the News(real news vs. fake news) on both acceptance and diffusion of news. Based on previous work, this study has developed a conceptual model to present each research hypothesis and tested it by conducting experiments as the follows. As a result, according to the authenticity of the news and the contents of the news (political and general), the acceptance of political contents was high regardless of the authenticity of the news, and the acceptance of real news was higher than that of fake news. However, in the proliferation (comment), both the political contents and the general contents showed the characteristic of spreading (commenting) fake news rather than real news. contrary to this, the cognitive level did not show any significant difference in acceptance (understanding) and proliferation (comment, sharing, recommendation). This study provides academic implications in that it examines the influences of accepting (comprehension) and diffusion (comment, sharing, recommendation) of real news and fake news. It also provides practical implications for responding to fake news and new marketing strategies in an environment where contents are delivered through diverse social media.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.433-442
• /
• 2010

A control of chloride diffusion coefficient is very essential for service life of reinforced concrete (RC) structures exposed to chloride attack so that much studies have been focused on this work. The purpose of this study is to derive the intended diffusion coefficient which satisfies intended service life and propose a technique for optimum concrete mixture through genetic algorithm(GA). For this study, 30 data with mixture proportions and related diffusion coefficients are analyzed. Utilizing 27 data, fitness function for diffusion coefficient is obtained with variables of water to binder ratio(W/B), weight of cement, mineral admixture(slag, flay ash, and silica fume), sand, and coarse aggregate. 3 data are used for verification of the results from GA. Average error from fitness function is observed to 18.7% for 27 data for diffusion coefficient with 16.0% of coefficient of variance. For the verification using 3 data, a range of error for mixture proportions through GA is evaluated to 0.3~9.3% in 3 given diffusion coefficients. Assuming the durability design parameters like intended service life, cover depth, surface chloride content, and replacement ratio of mineral admixture, target diffusion coefficient, where exterior conditions like relative humidity(R.H.) and temperature, is derived and optimum design mixtures for concrete are proposed. In this paper, applicability of GA is attempted for durability mixture design and the proposed technique would be improved with enhancement of comprehensive data set including wider range of diffusion coefficients.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.9 no.3
• /
• pp.115-124
• /
• 1997

We measured the variance of eddy diffusion and associated ‘diffusion coefficients’ in coastal regions of Korea by observing the separation distances among multiple drifters deployed simultaneously at the same initial position. The variance of eddy diffusion was found to be proportional to $t^m$, where t is the time and m is a non-integer scaling exponent between 1.5 and 3.5. The observed scaling exponent of eddy diffusion cannot be reproduced by diffusion models employing constant eddy diffusivity. In this study, we applied fractal theory in simulating exponential increase of variance of eddy diffusion. We employed the fGn(fractional Gaussian noise) as a ‘modified’ random walks corresponding to the oceanic eddy diffusion. The variance of eddy diffusion, which corresponds to the fBm(fractional Brown motion) of our diffusion model, is proportional to $t^{2H}$, where H is Hurst scaling exponent. The temporal increase of the variance. with scaling exponent between 1 and 2, was successfully reproduced by our fractal diffusion model. However, our model cannot reproduce scaling exponent greater than 2. The scaling exponents greater than 2 are associated with the velocity shear of the mean flow.