• 한국안전학회지
• /
• 제13권3호
• /
• pp.112-118
• /
• 1998

This work has been carried out to study the mixing characteristics of solid in vibrating feeder for stable operations of fluidized bed combustion. The system consisted of two particles such that fine particles were located on the top of the coarse particles before vibratory mixing had started. Effect of particle size, particle densities, vibration amplitude and vibration frequency were experimentally obtained. Also, a diffusion model was applied in interpreting the experimental results. From these results, the following empirical equation for the diffusivity was obtained. $0.87{(\frac{d_c}{d_f})}^{0.73}\;{(\frac{\rho_f}{\rho_c})}^{0.53}(A^2f)$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.199-200
• /
• 2010

본 논문은 석회석 미분말을 활용한 고유동 콘크리트의 염소이온 확산계수를 통하여 확산계수를 추정 하였다. 또한 석회석 미분말의 혼합률에 따른 미세공극을 수은압입법에 의해 알아보았다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.11-17
• /
• 2002

The first-order conditional moment closure (CMC) model is applied to $CH_4$/Air turbulent jet diffusion flames(Sandia Flame D, E and F). The flow and mixing fields are calculated by fast chemistry assumption and a beta function pdf for mixture fraction. Reacting scalar fields are calculated by elliptic CMC formulation. The results for Flame D show reasonable agreement with the measured conditional mean temperature and mass fractions of major species, although with discrepancy on the fuel rich side. The discrepancy tends to increase as the level of local extinction increases. Second-order CMC may be needed for better prediction of these near-extinction flames.

• 한국분말재료학회지
• /
• 제23권6호
• /
• pp.432-436
• /
• 2016

We investigate the microstructural and magnetic property changes of $DyH_2$, $Cu+DyH_2$, and $Al+DyH_2$ diffusion-treated NdFeB sintered magnets with the post annealing (PA) temperature. The coercivity of all the diffusion-treated magnets increases with increasing heat treatment temperature except at $910^{\circ}C$, where it decreases slightly. Moreover, at $880^{\circ}C$, the coercivity increases by 3.8 kOe in Cu and 4.7 kOe in Al-mixed $DyH_2$-coated magnets, whereas this increase is relatively low (3.0 kOe) in the magnet coated with only $DyH_2$. Both Cu and Al have an almost similar effect on the coercivity improvement, particularly over the heat treatment temperature range of $790-880^{\circ}C$. The diffusivity and diffusion depth of Dy increases in those magnets that are treated with Cu or Al-mixed $DyH_2$, mainly because of the comparatively easy diffusion path provided by Cu and Al owing to their solubility in the Nd-rich grain boundary phase. The formation of a highly anisotropic $(Nd,\;Dy)_2Fe_{14}B$ phase layer, which acts as the shell in the core-shell-type structure so as to prevent the reverse domain movement, is the cause of enhanced coercivity of diffusion-treated Nd-Fe-B magnets.

• 한국과학교육학회지
• /
• 제31권6호
• /
• pp.1009-1024
• /
• 2011

선행연구에 의하면 많은 중 고등학교 학생들과 교사들이 용해와 확산, 확산과 분출을 잘 구분하지 못한다고 하므로 본 연구에서는 이 용어들의 정의로부터 각 개념들을 서로 구분하는 것이 가능한지 알아보고자 하였다. 이를 위해 현재 과학자들이 합의하고 있는 것으로 생각되는 용어의 정의를 IUPAC의 Gold Book과 대학 물리화학 교재로부터 조사하여 비교하였다. 그리고 현행 중 고등학교 교과서 및 대학 일반화학 교재에 서술된 정의를 조사하여 학생들과 교사들이 혼란을 느낄 수 있는 문제점을 파악하고 그 개선점을 알아보고자 하였다. 그 결과 용해는 두 상이 혼합되어 하나의 상이 되는 것임에 비해 확산은 농도 차를 없애는 방향으로 물질이 이동하는 것이므로 서로 구분 가능하다고 생각된다. 그러나 중.고등학교 교과서와 대학 일반화학 교재에서도 대부분 확산을 농도 차에 의한 것으로 명확하게 서술하지 않았는데 이 1022 박종윤를 강조해서 서술할 필요가 있다. 분출은 용기 벽면의 아주 작은 구멍을 통해 기체 입자가 충돌 없이 빠져나가는 것이므로 기체 확산과 분명히 구분되지만 고등학교 교과서에서 분출의 정의를 제시한 교과서는 거의 없었다.

• 대한기계학회논문집
• /
• 제9권6호
• /
• pp.767-776
• /
• 1985

본 연구에서는 초기 조건(입구 R$_{i}$수)의 변화에 따른 속도 분포, 온도 분 포, 확산율, 계면의 변화등을 연구하며, 난류 혼합과 계면의 불안정에 기인한 속도장 과 온도장의 변화과정을 가시화 사진과 비교 분석한다.다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.102-111
• /
• 2004

Partial quenching structure of turbulent diffusion flames in a turbulent mixing layer is investigated by the method of flame hole dynamics to develope a prediction model for the turbulent lift off. The present study is specifically aimed to remedy the problem of the stiff transition of the conditioned partial burning probability across the crossover condition by adopting level-set method which describes propagating or retreating flame front with specified propagation speed. In light of the level-set simulations with two model problems for the propagation speed, the stabilizing conditions for a turbulent lifted flame are suggested. The flame hole dynamics combined with level-set method yields a temporally evolving turbulent extinction process and its partial quenching characteristics is compared with the results of the previous model employing the flame-hole random walk mapping. The probability to encounter reacting' state, conditioned with scalar dissipation rate, demonstrated that the conditional probability has a rather gradual transition across the crossover scalar dissipation rate in contrast to the stiff transition of resulted from the flame-hole random walk mapping and could be attributed to the finite response of the flame edge propagation.

• 한국연소학회지
• /
• 제15권3호
• /
• pp.1-7
• /
• 2010

Edge flames have been interested as a basic structure that is concerned to flame stabilization and re-ignition of non-premixed flames. The edge flame consists of a lean premixed flame, a rich premixed flame, and a diffusion flame. In order to investigate fundamental structures of the edge flames at the conditions near the flammability limits, edge flames were stabilized within a heated narrow channel. Highly diluted partially premixed methane was used, and the flow rates of air and the partially premixed mixture were controlled. Various flame behaviors, including a transition between ordinary edge flames and premixed flames, were observed. Flame stabilization characteristics were examined as well. All flame stabilization conditions in this study showed a similar trend: characteristic time scales were inversely proportional to the equivalence ratio defined at the burner inlet. Finally, an interesting flame structure having a weak diffusion branch enveloped by a closed premixed branch was found near the flammability limits even in a fuel-air mixing layer. This structure was named as a "flame-drop" and the importance of this structure was first suggested.

• 대한기계학회논문집
• /
• 제8권6호
• /
• pp.536-543
• /
• 1984

본 연구에서는 유동 조건을 표시하는 무차원 수로 널리 이용되고 있는 Richa- rdson수(R$_{i}$)를 변수로 하여 R$_{i}$의 변화에 따른 온도 분포, 표면 유동 속도와 확산율 등을 연구하였다. 아울러 이러한 열 구배에 의한 성층화 유동(stratifield flow)에서 R$_{i}$가 유동 특성과 어떤 상관 관계를 가지는 가를 알아보기 위하여 같 은 R$_{i}$값을 갖는 다른 조건들의 실험을 수행하였다. 비슷한 R$_{i}$값에서의 온 도 분포를 비교 분석함으로써 아직까지 정립되고 있지 않는 열오염 현상 해석에서의 지배 변수로서의 R$_{i}$의 위치를 확인하고, 부력 효과에 의한 흐름의 난류 구조가 어떻게 영향 받는가 하는 문제에도 관심을 두었다.제에도 관심을 두었다.

• 한국연소학회지
• /
• 제9권2호
• /
• pp.18-29
• /
• 2004

Partial quenching structure of diffusion flames in a turbulent mixing layer has been investigated by the method of flame hole dynamics in oder to develope a prediction model for the phenomenon of turbulent flame lift off. The present study is specifically aimed to remedy the shortcoming of the stiff transition of the conditioned partial burning probability across the crossover condition by employing the level-set method which enables us to include the effect of finite flame edge propagation speed. In light of the level-set simulation results with two models for the edge propagation speed, the stabilizing conditions for turbulent lifted flame are suggested. The flame hole dynamics combined with the level-set method yields a temporally evolving turbulent extinction process and its partial quenching characteristics is compared with the results of the previous model employing the flame-hole random walk mapping based on three critical scalar dissipation rates. The probability to encounter reacting state, conditioned with scalar dissipation rate, demonstrated that the conditional probability has a rather gradual transition across the crossover scalar dissipation rate. Such a smooth transition is attributed to the finite response of the flame edge propagation.