• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 1999년도 춘계학술대회
• /
• pp.395-408
• /
• 1999

From the dependence the primary energy of about 97% on imported energy from abroad in Korea, 1997, and the pressure by international address to the Global Climate Change and environmental problem, we should do our best efforts to develop and diffuse of energy technologies. Also, the developed countries such USA, EU, Japan, and so on, are promoting and accelerating the development of energy technologies. From those point of views, we thought that Korea now in the time to provide the new and updated strategies to develop the energy technologies more actively for enhancing national capability, The Korea Institute of Energy Research(KIER), the complex research institution for energies except nuclear energy sponsored by government, prepared the mid and long term strategies and primary research projects, must be worked in and with the KIER, for the areas related to the energy conservation and efficiency increase, the energy environment, the alternative energy, and the diffusion of developed energy technologies.

• 농촌지도와개발
• /
• 제4권1호
• /
• pp.269-281
• /
• 1997

This study intended to compare rural development programs between China and Thailand, focused on research and extension activities. In China, Agricultural Science Administration(ASC) took charges in agricultural research, and under the ASC there were 39 agricultural organizations throughout the country. There were distinctive differences as to condition of agricultural areas, under-developed area at middle and developing area by sea and river. To improve agricultural production in China, diffusion of new agricultural technology would be important along with supplying equipment such as soil test kits, plant nutrition analysis sets and vehcles for extension educators. In Thailand, under the Ministry of Agriculture & Cooperatives, there were five departments, seven divisions and eight national enterprises. Among them, Department of Agriculture was in charge of agricultural research while the Department of Agricultural Extension for extension services. Each department had sub-division and provincial organization including personnel management and budget. However, the relationships and consistency between the Department of Agriculture and the Department of Agricultural Extension needed to be improved for better cooperation of research and extension.

• 한국산업정보학회논문지
• /
• 제3권1호
• /
• pp.117-139
• /
• 1998

This study is intended to identify the factors affecting the successful information warehouse (IW) implementation through the technology acceptance model. As the IW has played an important role with the organizations, it has become a strategic management tool. However, because the building of an IWS requires a great amound of financing and a multi-period, managers should consider identifying the variables as a predictor of IWS success. The related research areas, such as TAM , TRA, and innovation diffusion theory, and previous research associated with the EWS success factors are reviewed in this paper. Based on the hypotheses presented , the study will empirically test the relationships between six external variable-user involvement, computer self-efficacy, OLAP characteristics, problem difficulty , user training and top management support-and system utilization via user's perceptions of ease of use, unusefulness. This study semmes to be a first attempt in this research area, and its results will provide general guidclines for IWS project managers to enhancement the like hood of system succes.

• 디지털융복합연구
• /
• 제9권1호
• /
• pp.1-12
• /
• 2011

The power of the internet community as a social network exerts great influence on all areas of our society not only on knowledge creation and knowledge sharing but also on politics, economy, and culture. This study aims to investigate how the diffusion process of information evolves on the internet in the new environment. The focus of the study is particularly on aspects of using information and the process of information production and the types and methods of online communities. It is the goal of the study to clarify aspects of the online community as an important mediator among universal means of communication in our society. Ways of social communication are changing rapidly and thus the reasoning for this change is very important policy issues to form a social consensus.

• 한국대기환경학회지
• /
• 제9권2호
• /
• pp.132-139
• /
• 1993

TCM has been used for many environmental impact assessments and many case studies in Korea. TCM was applied to urbvan areas and rolling terrains. But original TCM was developed for rural area, and this model could not reflect the characteristcs of these study sites. This paper analyzed the characteristics of TCM, and modified the algorithm of area source, and modified the vertical wind speed profile exponents and diffusion parameter to make it applicable in urban area. In the process of modification, an important error in area source calculation of original TCM program was found. So that was corrected as follows. $$ Before modification $QC = 0.79788456^*(0.5^*GRID)^**BA/(U(IA, IRUN)^*AA^*BA TCM09310$ After modification $QC = 0.79788456^*(500^*GRID)^**BA/(U(IA, IRUN)^*AA*BA) modified$ $$ Then original TCM and modified TCM-urban mode were compared, and it was found that predicted mean value by original TCM was 7 times higher than observed mean value. But mean value by modified TCM-urban mode was very similar to observed value.

• 로봇학회논문지
• /
• 제7권3호
• /
• pp.216-221
• /
• 2012

Recently, although the need of marine robots being raised in extreme areas, the basis is very deficient. Fortunately, as the robot competition is vitalizing and the need of the robot education is increasing, it is desirable to establish the basis of the R&D and industrialization of marine robots and to train professionals through the development and diffusion of marine robot kits. However, in conventional case, there is no remotely operated aerial robot-kit based on the balloon for the marine robot competition, which has the abilities of the airborne locomotion and obstacle avoidance. To solve this problem, an aerial robot-kit which has the abilities of the airborne locomotion and remote control, is developed. To verify the performance of the developed kit, test and evaluation such as surge, yaw and pitch is performed. The test and evaluation results show that the possibility of the real applications of the developed kit.

• 농촌지도와개발
• /
• 제17권3호
• /
• pp.385-418
• /
• 2010

This study aimed to find the way to help participants build capacity in rural development projects, through some case studies and Q-methodology. Decentralization and diffusion of bottom-up approach in rural development projects are the main contextual factors in this study. With the ethos of bottom-up approach in rural development, the human and financial inputs for capacity building increased drastically in the area of rural development policy. Four types of capacity building methods were identified in this study; training, consulting, learning organization, and forum. Theses methods were used more at planning step than implementation step in rural development projects. The government's effort to strengthen leadership in rural areas should be continued. The existing government's training program for capacity building had better include more diverse clients. Actions for capacity building should be centered on the needs of the participants in fields. Especially, organizing learning units is very important. Governments' rural development policy should establish the proper process which can help local actors plan their projects with enough time span.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.237-240
• /
• 2004

When the concrete structures are in contact with seawater, concentration of chloride for estimating chloride diffusion coefficient can be defined as the chloride concentration of sea water. However, in case the concrete structures, constructed in the seashore, aren't directly in contact with seawater, it is difficult to establish the interface concentration of chloride. In addition, marine concrete structures are greatly affected by salt attack such as rebar corrosion, among the cause of salt attack, airborne sea salt is primary factor. Therefore, in this study, salt attack environment by airborne sea salt was investigated in terms of a seasonal distribution at 33 spots, 6 areas in the East, West, South coast for 1 year. Results indicated that in the South coast, the amount of the airborne sea salt is comparatively higher in summer. in the West coast. higher in winter. On the other hand, in the East coast, the amount of the airborne sea salt is rarely affected by a season.

• 조명전기설비학회논문지
• /
• 제25권8호
• /
• pp.1-7
• /
• 2011

Recently, all-electric house technology became one of the green growth technologies and is integrated with various areas such as electricity, machinery, architecture, material, and etc. Fossil fuel energy is used for heating and hot water supply in the conventional houses but electricity is adopted in the new conceptual houses to maximize advantages of electricity such as amenity, safety, cleanness, and so on. In this paper, an economic analysis is carried out when LED lightings are adopted using the California Standard Practice Test which has been used to estimate the effects of existing DSM (Demand Side Management) programs. The results are able to contribute to the diffusion of all-electric houses and the establishment of basic data and planning for DSM policies.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.132-133
• /
• 2006

Optimized choice of material for two principally different types of PM components is presented. The first is characterized by high stresses in areas with high stress concentrations (for example synchronizer hubs with very sharp notches, typically <0.25mm in the pre-synchronizer slot and the inner splines). The second type has slightly larger notch radii (small spur gears and sprockets with typically notch radii between 1- 3mm). Diffusion alloyed materials are well suited for sharp notch components. Pre-alloyed materials are also well suited for applications with sharp notches if compressive residual stresses in the notch roots are created by appropriate process control. A free choice of material is available for components with the larger notch radii.