• 한국정보통신학회논문지
• /
• 제10권2호
• /
• pp.303-307
• /
• 2006

본 논문에서는 게이트길이가 $0.9{\mu}m,\;0.1{\mu}m$를 갖는 p형 SiGe MOSFET에 대한 전기적 특성들을 TCAD 시뮬레이터를 이용하여 연구하였다. 또한 온도 300K와 77K일 때 2개의 캐리어 전송모델(하이드로 다이나믹 모델과 드리프트-확산 모델)을 사용하여 전기적 특성들을 비교 분석하였다. 본 논문에서는 드리프트-확산 모델보다는 하이드로 다이나믹 모델을 사용하였을 때 드레인 전류가 더 많이 흐름을 알 수 있었다. 게이트 길이가 $0.9{\mu}m$일 때 문턱 전압은 온도가 300K, 77K에서 각각 -0.97V와 -1.15V의 값을 가짐을 알수 있었다. 또한 게이트 길이가 $0.1{\mu}m$일 때 문턱전압들은 게이트길이가 $0.9{\mu}m$일 때의 값과 거의 같음을 알 수 있었다.

• 한국수처리학회지
• /
• 제26권6호
• /
• pp.3-12
• /
• 2018

The objective of this study was to evaluate the radius of influence of effluent of water treatment system developed for the purpose of improvement of reservoir water quality using fluorescent dye (Rhodamine-WT) tracer experiment and 3-D numerical model. The tracer experiment was carried out in a medium-sized agricultural reservoir with a storage capacity of $227,000m^3$ and an average depth of 1.6 m. A guideline with a total length of 160 m was installed at intervals of 10 m in the horizontal direction from the discharge part, and a Rhodamine measurement sensor (YSI 6130, measurement range $0-200{\mu}g/L$) was used to measure concentration changes in time, distance, and depth. Experimental design was established in advance through Jet theory and the diffusion process was simulated using ELCOM, a three dimensional hydraulic dynamics model. As a result of the study, the direct effect radius of the jet emitted from the applied water treatment system was about 50-70 m, and the radius of physical effect by the advection diffusion was judged to be 100-120 m. The numerical simulations of effluent advection-diffusion of the water treatment system using ELCOM showed very similar results to those of the impact radius analysis using the tracer experiment and jet flow empirical equations. The results provide valuable information on the spatial extent of the water quality improvement devices installed in the reservoir and the facility layout design.

• Advances in concrete construction
• /
• 제15권6호
• /
• pp.419-430
• /
• 2023

In this study, the effect of two types of aggregates (fly ash aggregate and shale aggregate) on the density, strength, and durability of preplaced lightweight aggregate concrete (PLWAC) was studied. The results showed that the 7 - 28 days strength of concrete prepared with fly ash aggregates (high water absorption rate) significantly increased, which could attribute to the long-term water release of fly ash aggregates by the refined pore structure. In contrast, the strength increase of concrete prepared with shale aggregates (low water absorption rate) is not apparent. Although PLWAC prepared with fly ash aggregates has a lower density and higher strength (56.8 MPa @ 1600 kg/m³), the chloride diffusion coefficient is relatively high, which could attribute to the diffusion paths established by connected porous aggregates and the negative over-curing effect. Compared to the control group, the partial replacement of fly ash aggregates (30%) with asphalt emulsion (20% solid content) coated aggregates can reduce the chloride diffusion coefficient of concrete by 53.6% while increasing the peak load obtained in a three-point bending test by 107.3%, fracture energy by 30.3% and characteristic length by 103.5%. The improvement in concrete performance could be attributed to the reduction in the water absorption rate of aggregates and increased energy absorption by polymer during crack propagation.

• Korean Journal of Radiology
• /
• 제22권5호
• /
• pp.759-769
• /
• 2021

Objective: To evaluate the application of laplacian-regularized mean apparent propagator (MAPL)-MRI to brain glioma-induced corticospinal tract (CST) injury. Materials and Methods: This study included 20 patients with glioma adjacent to the CST pathway who had undergone structural and diffusion MRI. The entire CSTs of the affected and healthy sides were reconstructed, and the peritumoral CSTs were manually segmented. The morphological characteristics of the CST (track number, average length, volume, displacement of the affected CST) were examined and the diffusion parameter values, including fractional anisotropy (FA), mean diffusivity (MD), axial diffusivity (AD), radial diffusivity (RD), mean squared displacement (MSD), q-space inverse variance (QIV), return-to-origin probability (RTOP), return-to-axis probabilities (RTAP), and return-to-plane probabilities (RTPP) along the entire and peritumoral CSTs, were calculated. The entire and peritumoral CST characteristics of the affected and healthy sides as well as those relative CST characteristics of the patients with motor weakness and normal motor function were compared. Results: The track number, volume, MD, RD, MSD, QIV, RTAP, RTOP, and RTPP of the entire and peritumoral CSTs changed significantly for the affected side, whereas the AD and FA changed significantly only in the peritumoral CST (p < 0.05). In patients with motor weakness, the relative MSD of the entire CST, QIV of the entire and peritumoral CSTs, and the AD, MD, RD of the peritumoral CST were significantly higher, whereas the RTPP of the entire and peritumoral CSTs and the RTOP of the peritumoral CST were significantly lower than those in patients with normal motor function (p < 0.05 for all). In contrast, no significant changes were found in the CST morphological characteristics, FA, or RTAP (p > 0.05 for all). Conclusion: MAPL-MRI is an effective approach for evaluating microstructural changes after CST injury. Its sensitivity may improve when using the peritumoral CST features.

• 한국분말재료학회지
• /
• 제31권3호
• /
• pp.220-225
• /
• 2024

Molten salt reactors represent a promising advancement in nuclear technology due to their potential for enhanced safety, higher efficiency, and reduced nuclear waste. However, the development of structural materials that can survive under severe corrosion environments is crucial. In the present work, pure Ni was deposited on the surface of 316H stainless steel using a directed energy deposition (DED) process. This study aimed to fabricate pure Ni alloy layers on an STS316H alloy substrate. It was observed that low laser power during the deposition of pure Ni on the STS316H substrate could induce stacking defects such as surface irregularities and internal voids, which were confirmed through photographic and SEM analyses. Additionally, the diffusion of Fe and Cr elements from the STS316H substrate into the Ni layers was observed to decrease with increasing Ni deposition height. Analysis of the composition of Cr and Fe components within the Ni deposition structures allows for the prediction of properties such as the corrosion resistance of Ni.

• 한국습지학회지
• /
• 제19권4호
• /
• pp.375-382
• /
• 2017

본 연구에서는 방사형 흐름을 가지는 지표 유출수에 대한 오염물질의 초기세척현상 모의를 통하여 주차장과 같은 소규모 불투수 배수구역에서 발생하는 수렴형 강우유출수의 동적 유출특성에 대한 일반적 특성을 고찰하고, 이를 토대로 비점오염저감시설의 초기우수처리 효과를 극대화 시킬 수 있는 집수시설 배치 방안을 제시하고자 하였다. 이를 위하여 1차원 확산파 방정식(diffusion wave equation)과 오염물질 운송방정식을 이용하여 이상적인 방사형 불투수 배수구역에 대한 초기세척현상을 모의 하고, 이 결과를 이용하여 배수구역의 크기에 따른 오염물질의 초기세척강도를 산정 비교하였다. 초기세척 모의결과, 생화학적 산소요구량의 경우 평균경사도 0.02에서 배수구역의 길이 30-50m 범위일 때 초기세척강도가 가장 높았다. 이러한 결과는 주차장과 같은 소규모 불투수 구역에서는 강우유출수 집수시설의 위치와 갯수를 조정함으로써 배수구역의 길이 변경이 가능하며 이를 통하여 초기세척 강도와 첨두부하를 인위적으로 조절 가능함을 시사한다. 특히 초기우수수 처리에 중점을 둘 경우 집수시설의 위치와 갯수를 적절히 조절하여 초기세척 강도를 상승시킴으로써 동일한 용량의 비점오염저감시설로 보다 많은 오염물질 부하저감을 기대할 수 있을 것으로 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제7권5호
• /
• pp.367-371
• /
• 1986

Dynamic and equilibrium properties of n-alkane chains immersed in solvent molecules have been investigated by a molecular dynamics method. The n-alkane chain is assumed to be a chain of elements (CH$_2$) interconnected by bonds having a fixed bond length and bond angle, but each bond of the chain is allowed to execute hindered internal rotation. We studied the effect of the number of the chain elements (N$_c$ = 10, 15 and 20) on the equilibrium properties of the system, e.g., the pair correlation functions between a chain element and solvent molecules, g$_{cs}$(r), and between the chain elements, g$_{cc}$(r), and the configurational properties such as the mean-square end-to-end distance < R$^2$ >, the mean-square radius of gyration < S$^2$ >, and the eigenvalues of the moment-of-inertia tensor < S$_i^2$ > / < S$^2$ > (i = 1, 2 and 3). We also studied the dynamic properties of the system, e.g., the autocorrelation function C(A;t) where A = R$^2$(t), = S$^2$(t), or = ${\vec{V}}(t)({\vec{V}}$ = velocity of the center of mass), and the diffusion coefficient D. The g$_{cs}$(r)'s are almost equal irrespective of the change of Nc while g$_{cc}$(r) becomes larger as N$_c$ increases; The MD computed configurational properties < R$^2$2 > and < S$^2$ > were found to be a little different from the values calculated from the statistical equations of < R$^2$ > and < S$^2$ >, it may be due to the fact that our model for the MD simulations includes a long-range volume effect. From the < S$_i^2$ > / < S$^2$ >, it is found that the chain molecule has a nearly spherical shape irrespective of the variation of N$_c$. For the dynamic properties we found that the C(R$^2$;t) and C(S$^2$;t) of lower N$_c$ decay faster than those of higher N$_c$, while the C($\vec V$;t) of the center of mass in the chain is weakly dependent on the N$_c$. The center of mass diffusion coefficient D$_c$ decreases as N$_c$ increases while the end point diffusion coefficient D$_e$ is nearly equal irrespective of the change of N$_c$.

• 한국추진공학회지
• /
• 제6권2호
• /
• pp.37-44
• /
• 2002

액체로켓엔진에 사용되는 2-유체 동축형 분사기의 분무 연소 특성을 수치적으로 해석하였다. 가스 역학적 상호작용에 의한 미립화 및 그에 따른 물리 현상들에 대해 유동에 대한 보존방정식과 이론식들을 적용, 수치화하여 액체 제트의 상태, 제트의 속도, 제트의 붕괴길이, 액적의 크기등을 예측 하였으며, 액체제트 분사공 크기에 따른 미립화의 변화를 고찰하였다. 모델 검증을 위하여 액체 제트의 접촉길이와 액적의 크기를 기존의 실험결과와 비교하였으며, 그 결과 정성적으로 일치함을 나타내었다. 액체 제트의 접촉길이는 분사공의 직경이 증가할수록 짧아지고 액적의 크기도 분사공의 직경이 증가할수록 작아진다. 액체 제트는 박리율 증가에 따른 분무화에 의하여 단면적이 감소되며, 그에 따른 질량유속의 보존과 가스로부터의 운동량 화산에 따라 미립화가 활발해지는 영역으로부터 그 속도가 급속히 증가된다.

• 대한전자공학회논문지SD
• /
• 제47권10호
• /
• pp.14-22
• /
• 2010

기존의 n-type metal-oxide-semiconductor field effect transistor(NMOSFET)은 $n^+/p^{(+)}/n^+$ type의 이온 주입을 통하여 소스/채널/드레인 영역을 형성하게 된다. 30 nm 이하의 채널 길이를 갖는 초미세 소자를 제작함에 있어서 설계한 유효 채널 길이를 정확하게 얻기 위해서는 주입된 이온들을 완전히 activation하여 전류 수준을 향상시키면서도 diffusion을 최소화하기 위해 낮은 thermal budget을 갖도록 공정을 설계해야 한다. 실제 공정에서의 process margin을 완화할 수 있도록 오히려 p-type 채널을 형성하져 않으면서도 기존의 NMOSFET의 동작을 온전히 구현할 수 있는 junctionless(JL) MOSFET이 연구중이다. 본 논문에서는 3차원 소자 시뮬레이션을 통하여 silicon nanowire(SNW) 구조에 접목시킨 JL MOSFET을 최적 설계하고 그러한 조건의 소자에 대하여 conductance, maximum oscillation frequency($f_{max}$), current gain cut-off frequency($f_T$) 등의 기본적인 고주파 특성을 분석한다. 채널 길이는 30 nm이며 설계 변수는 채널 도핑 농도와 채널 SNW의 반지름이다. 최적 설계된 JL SNW NMOSFET에 대하여 동작 조건($V_{GS}$ = $V_{DS}$ = 1.0 V)에서 각각 367.5 GHz, 602.5 GHz의 $f_T$, $f_{max}$를 얻을 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2679-2683
• /
• 2014

Mechanisms underlying the impacts of interactions between carbon nanoparticles (CNPs) and ionic liquids (ILs) on the physicochemical behavior of CNPs need to be more full worked out. This manuscript describes a theoretical investigation at multiple levels on the interactions of fullerene $C_{60}$ with 21 imidazolium-based ILs of varying alkyl side chain lengths and anionic types and their impacts on $C_{60}$ dispersion behavior. Results show that ${\pi}$-cation interaction contributed to mechanism of the $C_{60}$-IL interaction more than ${\pi}$-anion interaction. The calculated interaction energy ($E_{INT}$) indicates that $C_{60}$ can form stable complex with each IL molecule. Moreover, the direction of charge transfer occurred from IL to $C_{60}$ during the $C_{60}$-IL interaction. Quantitative models were developed to evaluate the self-diffusion coefficient of $C_{60}$ ($D_{fullerene}$) in bulk ILs. Three interpretative molecular descriptors (heat of formation, $E_{INT}$, and charge) that describe the $C_{60}$-IL interactions and the alkyl side chain length were found to be determinants affecting $D_{fullerene}$.